Smart RGB LED Floor Lamp User Manual

Smart RGB LED Floor Lamp

PACKAGE CONTENT

Lighting Facts Per Lamp

• Brightness
  • 2000 lumens
• Estimated Yearly Energy Cost$2.4
  • Based on 3 hrs/day, 11¢/kWh
  • Cost depends on rates and use
• Life
  • Based on 3 hrs/day 18 years
• Light Appearance
• Energy Used 24 watts
• Connection Methods WiFi & Bluetooth

Product Parts Description

Assembly Instructions

Notes:
During this process, the wire will be entangled with the rotation of the rod, please tide the direction of the rope to prevent the wire from being cut.
Steps:

1. Place the light on a flat surface,
2. Connect all the parts from lamp pad to heavy base. (Parts from 1-7)
3. Clockwide and tighten them.(Pls pay attention to the wire)

Operating instruction

Button function:

1. Short press: on/off
2. Long press: adjust the brightness (1%-100%) Long press for 15 seconds: restore factory settings

Rotation angle of the light guide plate

• Just manually rotate the lighting plate, which can be rotated up and down by 90 degrees (maximum Angle).

Download Magic Home App

Download “Magic Home” App from Apple Store and Google Play Store, or scan the QR code.

How to connect smart device via WiFi?

1. Open your phone Bluetooth, turn on device.
2. Enter “Magic Home” app, click “+” at the top right corner.
3. Tap the device on the list, then select your WiFi network, enter the password, done!

How to connect smart device via Bluetooth?

1. Open your phone Bluetooth, turn on device.
2. Enter “Magic Home” APP, or click “+” at the top right corner.
3. Tap the device on the list, then select upper right corner “Bluetooth Local Mode”, done!

Notes:

1. WiFi and Bluetooth connection can’t be connected simultaneously.
2. Pls reset the device first when you switch the connection method.

How to reset the factory setting?

• Long press the button on the lamp rod, keep 15 seconds, until the lamp flash, done!

How do I connect to Amazon Alexa?

Tips:

1. Please rename your device in alexa app and make sure there is a device on the list.
2. Check whether the device is ” Cloud Online”.
   • Step 1: Click the device icon > tap upper right corner”…” > Device Information > Cloud “online”
   • Step 2: Link with Alexa Directly
3. Enter home page in “Magic Home” app, click upper left corner SETTING icon.
4. Enter Login Page, sign in your Amazon Alexa account, then click ” Link Now”.
   • Step 3. Send commands to your Alexa Supported voice commands :
   • Turn on/ off < light name >.
   • Dim < light name >.
   • Brighten < light name >.
   • Set < light name > to [0-100%].
   • Turn < light name > to [color].

Supported Color Options:

• Blue, Crimson, Cyan, Fuchsia, Gold, Green, Lavender, Lime, Magenta,
• Orange, Purple, Red, Salmon, Teal, Sky Blue, Turquoise, Violet, Yellow.

For Scenes:

• You can activate scenes by following voice commands:
• Alexa, activate {scene name}
• Alexa, turn on {scene name}.

Notes:

1. If Alexa can’t control your light, please check whether the light is Cloud Online.
2. Please check the device name you are calling is the same as the device in the Alexa app, thank you!

How do I connect to Google Assistant?

Tips:

1. Please rename your device in Google Home app and make sure there is a device on the list.
2. Check whether the device is “Cloud Online”.
   • Step 1: Enter Google Home App and click the “+” at the top left corner > set up device.
   • Step 2: Click “Work with Google”, then enter “Magic Home”.
   • Step 3: Login your ” Magic Home” account.
   • Step 4: Send commands to your Google, after the app links with Google Home successfully:

Supported voice commands:

• Turn on/off < light name>.
• Dim < light name >.
• Brighten < light name >.
• Set < light name> to [0-100%].
• Turn < light name> to [color].

Supported Color Options:

• Brange, med, man, urgia, se,s, Bee, up, avender, onta

For Scenes:

• You can activate scenes by following voice commands:
• Hey Google, activate {scene name}.
• Hey Google, turn on (scene name}.

Notes:

1. If Alexa can’t control your light, please check whether the light is Cloud Online.
2. Please check the device name you are calling is the same as the device in the Alexa app, thank you!

2.4G Remote Controller

(Additional purchase required)

• A. Pair the remote control:
  • After the lamp is powered on, press the power button for 5 seconds immediately (within 3 seconds).
  • When the lamp flashes slowly for 3 times, it means the pairing is successful.
• B. Remove the remote control:
  • After the lamp is powered on, press the power button for 5 seconds immediately (within 3 seconds).
  • When the lamp flashes for 3 times, it means the removing is successful.

1. One-to-many control
   • The remote control can be paired with multiple WIFI lamps at the same time, and multiple WIFI lamps can be controlled with one key without limitation.
   • Note: Please refer to the steps of pairing or removing the remote control
2. Many-to-one control
   • A single WIFI lamp can be paired with multiple remote controls, and each remote control can control the same WIFI lamp separately. ( a single lamp can support up to 16 remote controls)
   • Note: Please refer to the steps of pairing or removing the remote control

Thank you for your purchase! Please refer this instruction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>