SmartAVI RK8-HLX-500 HDMI Extender Rack Over User Guide
- June 15, 2024
- SmartAVI
Table of Contents
SmartAVI RK8-HLX-500 HDMI Extender Rack Over User Guide
OVEVIEW
The RK8-HLX-500 is the perfect solution for extending HDMI signals to a remote location up to 500 feet away. It is the ideal way to consolidate up to eight HDMI signal sources in central one location. The RK8-HLX-500 is rack- mountable, meaning it can fit into mounting shelves without the need for additional mounting equipment. It is capable of sending 1080p (1920×1080 @ 60Hz) Full HD HDMI signals to end-point displays in a variety of ranges and applications. One unit can extend to up to eight displays easily without the additional expense & power-costs of multiple extenders systems, making it the best choice for boosting the range of multiple HDMI source devices.
FEATURES
- Extends HDMI signals up to 500 feet via LAN (Cat5e/6 cables)
- Chainable for thousands of feet of extension
- Supports up to 8 HDMI sources on single rack
- Supports high resolution 1080p HD video, 1920×1080 at 60Hz
- Supports stereo audio
- IR (Infrared) remote enabled
- Rack mountable
- No software or driver required
- Plug-and-Play ready
- Distance can be increased if using ethernet Giga Switch
HARDWARE INSTALLATION
-
Power off the HDMI source and display.
-
Connect an HDMI cable from the HDMI source to the HDMI IN port of the RK8-HLX-500 transmitter.
-
Connect the RK8-HLX-500 transmitter to the HLX-RX500 receiver using a CAT5e/6 cable (up to 150ft).
-
Connect an HDMI cable from the HDMI OUT port on the HLX-RX500 receiver to the HDMI display
-
Connect the power on the RK8-HLX-500 transmitter plugging in their power adapters (12VDC2A) or provide 12VDC input from the rear DC input port.
NOTE: If the RX side has connected DC adapter, TX can get the DC power over the CAT5e/CAT6 cable, so leave DC input port empty. Only 1 power supply is required for both units. (In certain cases, if the receiver has too much drop off power, we recommend to connect a 12V DC power supply to each receiver -
Power on the HDMI source, displays and speakers. The RX will read the EDID from the monitor, and then pass the data into the TX automatically.
INTALLATION NOTE: Do not stack receiver units. Stacking inhibits heat distribution.
RK8-HLX-500 FRONT
RK8-HLX-500 BACK
TECHNICAL SPECIFICATION
VIDEO
Format| HDMI 1.3 (HDCP compliant)
Resolution| Up to 1080p (1920×1080 @ 60Hz)
Inputs| (8) HDMI Type A 19-pin (female)
Outputs| (8) RJ-45 for CAT5/5e/6
Input Cable Length| Up to 40 ft
Output Cable Length| Up to 500 ft
AUDIO
Format| HDMI (Dolby TrueHD, DTS-HD MA)
Input Interface| HDMI (Integrated)
Output Interface| CAT5/5e/6 via RJ-45
IR
Signal Type| 38 KHz
Interface| 3.5 mm Jack Socket (Female)
OTHER
Power Internal| 100-240 VAC (CCPWR06)
Dimensions| 17” W x 1.7” H x 4.357” D
Weight| 3.6 lbs
Approvals| UL, CE, ROHS Compliant
Operating Temp.| 32 – 122°F (0 – 50°C)
Storage Temp.| -4 – 149°F (-20 – 65°C)
Humidity| Up to 90% (no condensation)
WHAT’S IN THE BOX
| PART NO. | Q-TY | DESCRIPTION |
|---|---|---|
| **** RK8-HLX-500 | **** 1 | HDMI & IR 8-Port Rackmount Extender Transmitter |
| Power Cord | 1 | CCPWR06 |
| Quick Start Guide | 1 |
NOTICE
The information contained in this document is subject to change without notice. Smart AVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. Smart AVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc.
DESIGNED AND MADE IN THE USA
800.AVI.2131, 702.800.0005
2455 W Cheyenne Ave, Suite 112 North Las Vegas, NV 89032
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>