BSBL d001 Moving Head Light User Manual

BSBL d001 Moving Head Light

Product Information

The product is a console with 512 channels and a 15-channel mode. It has various functions and controls for motor rotation, display settings, sound control, and initialization parameters. The console allows users to adjust different parameters such as horizontal and vertical settings, dimming levels for different colours, stroboflash, and more.

Specifications

• Channels : 512
• Channel Mode: 15 channels
• Motor Rotation: X Motor forward/reversal, Y Motorforward/reversal
• Display : Numerical value
• Sound Control Mode : On/Off
• Initialization Parameters : Reset

Product Usage Instructions

Motor Rotation
To control the motor rotation:

• X Motor forward rotation : rPoF
• X Motor reversal : rPon
• Y Motor forward rotation : rToF
• Y Motor reversal: rTon

Display Settings
To adjust the display settings:

• Forward display reverse video: rdoF
• Keep the original state: rFoF
• Initialization Parameters: RST

Channel Functions
The console allows you to adjust various channel functions:

Frequently Asked Questions (FAQ)

How many channels does the console have?
The console has a total of 512 channels.

What is the channel mode?
The channel mode is 15 channels.

What can I control with the motor rotation settings?
You can control the X and Y motor rotation, both in forward and reverse directions.

How do I adjust the display settings?
To adjust the display settings, you can use the provided commands such as rdoF for forward display reverse video and rFoF to keep the original state.

Installation and operating instructions:

1. Plugged into a grounded power outlet for indoor use only.
2. Don’t expose the device to rain or moisture, avoid the risk of fire or electric shock. Make sure that no flammable objects near the device.
3. Install the equipment in a well-ventilated place at least 50cm from any surface, and ensure that the ventilation slots are not blocked.
4. Disconnect the equipment from the power supply before any operation.
5. The ambient temperature should not exceed 40°C, and the maximum ambient temperature is 45°C. Don’t operate the device at higher tempratures.
6. The equipment should be stopped immediately, if a fault occurs, and do not repair the equipment by yourself. Improper maintenance can result in damage and malfunction. Contact technical support for repair approval. Only the same accessories can be used with the original parts, and make sure the power cord is not blocked or damaged.
7. Do not expose your eyes to light sources, which can be a sign of a seizure in sensitive people.
8. The lamps are only used for decoration and not suitable for ordinary household lighting.
9. Replacing the fuse: Unplug the device from the power supply, remove the fuse holder from its original position with a srewdriver, take out the burnt fuse, replace the fuse with the same characteristics, then re-rotate the screw, and connect the device to the power supply superior.
10. WARNING : Stop using it if the fuse is still blowing after being replaced. Please contact customer support for further instructions, continued use may cause serious damage.
11. Fix the equipment with the screw holes on the bracket to ensure that the equipment is firmly fixed to prevent vibration and movement during operation, and always check whether the structure of the equipment is strong enough to withstand equipment that is at least ten times.
12. The equipment must be fixed by professionals in places that elders and children cannot reach, and no one can pass under or over the pedestrian crossing.
13. CAUTION: DO NOT OPEN THE HOUSING SHOCK HAZARD Please read this manual carefully before operating this product.
14. End-of-life of the product: This sign indicates that this product should not be thrown into household waste in European Community countries and that waste should be recycled to support the sustainable recycling of resources in order to protect the environment and human health Utilize. If you need to recycle used electrical appliances, please go to an electrical appliance collection centre or contact the dealer where you purchased the product to ensure the ecological recycling of the product.
15. Before cleaning the device, disconnect it from the power source if connected. Do not use harsh cleaners. Wipe off dust or dirt from the product with a clean cloth. We are not responsible for damage caused by incorrect handling, improper use or wear and tear.
16. We reserve the right to make technical modifications.

Please read this manual carefully before use

Note : this manual contains important information. installation, and operation according to the requirements of the manual. Please save this manual for emergencies. Startup steps for various modes

1. Automatic mode
   • Press”MENU” to find”Au01″, and press”ENTER”.
   • Press “Up” or “Down” to select “Au01 “or”Au02” and press the “ENTER” key.
2. Sound Mode
   • Press “MENU” to find “Snon” and press”ENTER”
   • Press “UP” or”DOWN” to find”Snon” to turn on sound control mode, and “SnoF” to turn off sound control mode.

Technical Parameters

• Voltage 1:AC100-240V 50/60HZ
• Light source 1: 1 pcs 4IN1 (RGBW) lamp beads (kaleidoscope effect lens)
• Light source 2 :36 PCS lamp beads
• Light source 3 :1 PCS Green laser
• Running mode: DMX512, on its own, master-slave, sound
• DMX channels: 15 channel

Unpacking instructions

When you receive the device, open it and check whether the goods are complete. If not, please notify the carrier immediately and preserve the packaging, and if the damage is revealed, preserve the packaging and all packing materials for safe transportation of the device.

• 1 pcs lamps
• 1 instruction manual
• 1 power cord
• 1 bow bracket
• 2 knobs (installed on the machine)

LED DISPLAY

1. Control buttons (MENU DOWN UP ENTER)
2. Display
3. DMX IN
4. DMX OUT
5. POWER IN

Procedure for Installing Support

1. Install the bow bracket and fix it with screws
2. Install the bow bracket win the bow breaker
3. Confirm that the bracket position is installed correctly
4. The position is installed successfully Confirm whether the bracket

Hook brackets are not included in the package

Console mode and master-slave mode:

• DMX OUT to the DMX IN of the No. 1 fixture; DMX OUT of the No. 1 fixture is connected to the DMX IN of the No. 2 fixture,
• Press “MENU” to find “Addr”, press “ENTER”, display “A001” press “Up” or “Down” to select the value of the console;
  Master and slave settings: No. 1 light fixture is set to self-propelled or voice-activated function according to the startup mode; 2, 3, and 4**** are set to DMX512 mode: DMX address code is 001;

MENU

Au01-02

| Au01| Go mode
Au02| Slow walking mode

SnOn-oFF

| SnOn| Sound control mode
SnoFF| Turn off sound control mode

rPoF

| rPoF| X Motor forward rotation
rPon| X Motor reversal

rToF

| rToF| Y Motor forward rotation
rTon| Y Motor reversal

rdoF

| rdoF| Forward dispiay
rdon| reverse video

rFoF

| rFoF| keep the original state
rFon| Initialization Parameters
RST| REST| reset

15 channel pattern

control

14

|

0-255

| 0-4 Turn off the light belt 5-109 Lamp band color selection 110-255 Lamp belt self-walking
15| 0-255| 0-249 none 250-255 reset

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>