SMARTAVI RK8-HDX-ULT Power Extender Rack Over Cat5e6 User Guide

: June 15, 2024
: SmartAVI

Table of Contents

SMARTAVI RK8-HDX-ULT Power Extender Rack Over Cat5e6
Technical Specification
What’s in the Box
FAQ
TECHNICAL SPECIFICATION
WHAT’S IN THE BOX
OVEVIEW
FEATURES
HARDWARE INSTALLATION
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SMARTAVI RK8-HDX-ULT Power Extender Rack Over Cat5e6

SMARTAVI-RK8-HDX-UL- Power-Extender-Rack-Over-
Cat5e6-PRODUCT

Technical Specification

Video

Format: HDMI 1.3 (HDCP Compliant)
Resolutions: 800×600, 1024×768, 1280×1024, 1366×768, 1920×1200, 480i, 720p, 1080i, 1080p, 4K x 2K @30Hz @24bit
Transmission Distance: 450 feet (135 meters)
Color Depth: Deep Color 36/30/24 Bit at 1080p and 3D
Audio Format: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
IR Range: 38kHz, 56kHz
Video Bandwidth: 10.2Gbps
Input Video Signal: 1.2 Volts P-P
Input DDC Signal: 5 Volts (TTL)

I/O Connector (Transmitter)

Input: (8) HDMI-A 19-pin (female)
Output: (8) RJ45 Jack

I/O Connector (Receiver)

Input: (1) RJ45 Jack
Interface: (1) 3.5mm Jack for IR Emitter, (1) HDMI-A 19-pin (female)

Other

Power Internal: 110/220V
Dimensions: 17W x 3.6H x 3D
Weight: 4.3 lbs
Approvals: UL, CE, ROHS Compliant
Operating Temp.: 10% to 85% (Non-condensing)
Storage Temp.: 10% to 85% (Non-condensing)
Humidity: 10% to 85% (Non-condensing)

What’s in the Box

PART NO. Q-TY DESCRIPTION

RK8- HDX-ULT-TX HDMI, RS232 and IR 8-Port 1 Rackmount Transmitter over a Single Cat5e/6 Cable

Power Cord
Quick Start Guide

Overview

The RK8-HDX-ULT is an 8-Port HDMI, IR, RS232 and Power Extender Rack Over Cat5e/6. It allows you to consolidate up to eight 4K HDMI extenders in one powered rack unit to transmit HD signals up to 450 feet away using Cat5e/6 cables.

Features

Consolidates up to eight 4K HDMI extenders in one powered rack unit
Transmits HD signals up to 450 feet away using Cat5e/6 cables

Hardware Installation

Please follow the steps below to install the hardware:

Connect the HDMI inputs of the transmitter to the video sources using HDMI cables.
Connect the HDMI outputs of the transmitter to the HDMI inputs of the receivers using Cat5e/6 cables.
Connect the audio inputs and outputs according to your requirements.
Connect the IR emitter and receiver cables to the respective ports.
Connect the power cord to the transmitter and plug it into a power source.
Connect the power cords of the receivers to power sources.

FAQ

Q: Can I use this product with any HDMI-enabled devices?
A: Yes, this product is compatible with any HDMI-enabled devices.
Q: What is the maximum transmission distance?
A: The maximum transmission distance is 450 feet (135 meters) using Cat5e/6 cables.
Q: Does this product support 4K resolution?
A: Yes, this product supports 4K resolution.
Q: Can I control my devices using the included IR emitter?
A: Yes, you can control your devices using the included IR emitter.

TECHNICAL SPECIFICATION

VIDEO

Format| HDMI 1.3 (HDCP Compliant)

Resolutions

| 800×600, 1024×768, 1280×1024,

1366×768, 1920×1200, 480i,

720p, 1080i,1080p,

4K x 2K @30Hz @24bit

(1) HDMI-A 19-pin (female)

WHAT’S IN THE BOX

PART NO.	Q- TY	DESCRIPTION

RK8- HDX-ULT-TX

| ****

1

| HDMI, RS232 and IR 8-Port

Rackmount Transmitter over a Single Cat5e/6 Cable

Power Cord| 1| CCWPWR
Quick Start Guide| 1|

NOTICE

The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc

OVEVIEW

The RK8-HDX-ULT is the perfect solution for extending 4K HDMI signals to 8 remote locations 300 feet via PoE or up to 450 feet when both sides are powered, ensuring peak performance when transmitting ultra-high quality picture resolutions. The RK8-HDX-ULT is the perfect extender solution for any system, and works in tandem with SmartAVI matrixes for robust routing configurations. Plus, with RS-232 and IR remote control, taking command is convenient and easy every time! It is the ideal way to consolidate up to eight workstation computers into one location. It is fully compatible with MAC, PC and LINUX HDMI standards. Up to eight displays can be extended easily from a rack without the mess or expense of multiple extenders. Rather than buy multiple extenders for rack components, and having to find power strips or numerous power outlets for the adapters, the SmartAVI rack series of extenders allows for up to eight transmitters and eight receivers with only one power supply. Whether it’s for a home entertainment system or a commercial installation, the RK8-HDX-ULT delivers flexibility and control. Don’t let the distance bring your system down: let the RK8-HDX-ULT extend your reach today

FEATURES

Extends HDMI, IR, and Power Output over Cat5e/6
Extends IR Control Signals for Remote Control
Supports 1080p/60fps and 4K/30Hz resolution
Supports Power over Ethernet (PoE) up to 300 ft
Transmits up to 450 feet when both sides are powered
Data Signals up to 3.4Gbps
HDCP compliant; EDID learning
Bi-directional IR and RS-232 control
LED status indicators
Rack mountable
Up to 8 units on single rack

HARDWARE INSTALLATION

Before connecting, make sure all sources are powered down.
Connect an HDMI cable from the HDMI source to the HDMI IN port of the RK8-HDX-ULT transmitter.
Connect an IR emitter (optional) to the IR OUT port on the transmitter.
Connect the RK8-HDX-ULT transmitter to the HDX-ULT receiver using a CAT5e/6 cable (up to 450ft).
Connect an IR receiver (optional) to the IR IN port on the receiver.
Connect an HDMI cable from the HDMI OUT port on the RK8-HDX-ULT receiver to the HDMI display.
Connect the power on the HDX-ULT transmitters by plugging in their power adapters (12VDC2A) or provide 12VDC input from the rear DC input port.
NOTE: If the RX side has a connected DC adapter, the TX can get the DC power over the CAT5e/CAT6 cable, so leave the DC input port empty. Only 1 power supply is required for both units. (In certain cases, if the receiver has too much drop off power, we recommend to connect a 12V DC power supply to each receiver.
Power on the HDMI source, displays and speakers. The RX will read the EDID from the monitor, and then pass the data into the TX automatically
INTALLATION NOTE: Do not stack receiver units. Stacking inhibits heat distribution.