SMARTAVI XTP-TX FT OVER CAT5 Extender User Guide

SMARTAVI XTP-TX FT OVER CAT5 Extender

ABOUT UX-PLUS

XTPRO is a high resolution UXGA and stereo audio extender system (transmitter and receiver) designed to broadcast desktop video, stereo audio signals, IR and RS-232 over unshielded twisted pair (UTP) cabling. With RS-232 communication support the XTPRO allows users to send commands to single or multiple devices. This allows the user to change the volume, change the channel or turn on/off the display panel remotely.

FEATURES

• Supports dual screens
• Uses easy to install, inexpensive CAT-5/5e/6/7/8
• Each output reaches up to 1,000 feet (300 m)
• Supports high resolution video up to 1900×1200
• HDTV compatible (720p, 1080i, 1080p)
• 300 MHz bandwidth
• Sends high-resolution VGA, stereo audio signals, RS-232 or IR from one source to 2 locations
• Compatible with VGA, XGA, Sun, MAC and SGI
• Sync Format / Polarity Preservation
• Compatible with line level stereo audio signals
• High ground loop immunity
• Built-in power surge and transient protection
• Designated trimmer in the remote unit to compensate for cable length
• Compact metal case enclosure
• External power supply
• RS-232 communication support to single or multiple displays
• IR command to single or multiple displays

HARDWARE INSTALLATION

1. Connect the output of the computer video card to the video input of the transmitter using the included male to male video cable.

2. Connect the output of the computer audio card to the audio input of the transmitter using 3.5 mm audio male to male audio cable.

3. Connect local monitor to the VGA out of the transmitter.

4. Connect external speakers to the transmitter’s audio out (Standard 3.5 mm stereo miniplug).

5. In the back of the unit connect the CAT5 cable that will connect to the receiver (XTPRO-RX).
   NOTE : You can not use RS232 and IR at the same time.

6. Connect CAT5 cable (coming from the transmitter) to the back of the receiver.

7. Connect 1-2 display monitors to the VGA out connectors on the front of the receiver.

8. Connect 1-2 sets of external speakers to the audio output connections on the front of the unit (Standard 3.5 mm stereo miniplug).

TECHNICAL SPECIFICATION

VIDEO

Format| RGBHV, RGsB,YUV, Y/C, CVBS
Resolution| Up to 1900 x 1200 VGA, SVGA, XGA, SXGA
Connector Type| HD 15 socket
AUDIO
Signal Type| Stereo unbalanced
Connector| 3.5 mm jack socket
OTHER
Power Supply| 5VDC @.5A,

2.1 mm DC jack (center +ve)

Dimensions| 5.3” W x 3.5” D x .9” H
Weight| .8 lbs
Operating Temp.| 0 to 40°C (32° to 104° F)
Storage Temp.| -20° to 60°C (-4° to 140° F)
Humidity| Up to 95% (non-condensing)

WHAT’S IN THE BOX

RS-232, IR CAT5 Transmitter

XTP-RX| 1| UXGA/YUV/YC, Audio,

RS-232, IR CAT5 Receiver

5VDC0.5A| 2| 5VDC0.5A Power Supply
Quick Start Guide| 1|

NOTICE
The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose.
SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc.

SmartAVI.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>