Glory Fit LC11 Smart Watch for Men User Manual
- June 15, 2024
- Glory Fit
Table of Contents
Smart Watch User Manual
LC11 Smart Watch for Men
things prepare
When taking care of your bracelet, please remember the following tips:
- Clean the bracelet regularly, especially the inside of the bracelet, to keep it dry.
- Adjust the tightness of the bracelet to ensure air circulation.
- It is not advisable to use excessive skin care products on the wrist with the bracelet.
- If you experience skin irritation or discomfort, please stop wearing it.
Equipment type| Sports round smart watch| Battery Type/Capacity|
Polymer/235mAh
---|---|---|---
display| 1.32-inch full- circle color screen| Heart rate model| LC11
waterproof level| IP67| charging method| Magnetic base charging
Chassis material| Zinc alloy| platform| Realteck8763E
Wristband Material| Silicone/Steel Strap| Acoustic| Support speaker and MIC
Schematic diagram of the bracelet host1
boot
Press and hold the upper button for 3 seconds or plug in the charger to charge
and turn it on.
Charge
The base is magnetically charged. Bracelet APP download and binding
-
Download and install the APP
A. Use the mobile phone to scan–Setup APP download–, download the APP.
B. For IOS system, select App store, search and download Glory Fit; for Android system, you can select App Bora to download and install Glory Fit, or scan QR code to download.https://app.help- document.com/gloryfit/download/index.html
Note: The mobile phone must support Android 4.4 or I OS 9.0 or above. -
APP binding bracelet
1. Open Glory Fit, click “Add Device” “Select Device” Select the bracelet to be bound.
2. Click your device in the scanned device list.
3. There will be a Bluetooth pairing request in the IOS system, click the Bluetooth “pairing” Just confirm.
4. The binding is successful. Note: Before binding the bracelet to the APP, you need to open the bracelet The interface Open above state; the bracelet is bound to Bluetooth icon link.
The APP binding bracelet icon is as follows:
Bracelet function introduction
Power-on status:
Main screen menu interface switching, the interface shown below, etc.; 
The bracelet defaults to 5 dials, and you can switch at will
by long-pressing the main dial; you can also change the main dial at will in
the dial market on the APP side, or you can customize the dial on the APP
side.
Click the shortcut button, 3 sets of theme UI can be switched at will
Key Function：
The up button is the main function button, and the down button enters the call
page.
Unbind：
The Android phone can be disconnected from the phone by simply clicking Remove
Device.
After IOS removes the device, the Bluetooth of the mobile phone needs to be
ignored. 
Reminder function
The reminder function needs to turn on the reminder switch on the “Device”
function page of the APP, and keep the mobile phone and the bracelet in the
state of successful Bluetooth connection, and vibrate to remind when a message
comes.
Incoming call reminder: When there is an incoming call, the bracelet will
vibrate and display the name or number of the incoming call. If the APP opens
the “Call Rejection” function, long press the screen to reject the call.
Reminder classification: call reminder, message reminder, sedentary reminder,
smart alarm reminder, do not disturb mode, etc.
SMS reminder: When receiving a text message, the bracelet vibrates and
displays an icon reminder, click to view the text message. Application
software reminder: When receiving application software messages, the bracelet
vibrates and displays an icon reminder, click to view WeChat content.
Smart alarm clock: Three alarm clocks can be set.
After setting, they will be synchronized to the wristband. The intelligent
alarm clock is a silent alarm clock. When the alarm rings, the wristband will
vibrate moderately and support offline alarm reminders.
Sedentary reminder: The default reminder intervalone hour; in the connected
state, after opening, if the user does not exercise within an hour, the
bracelet will vibrate to remind the user to exercise.Other reminders: When
receiving other informationsuch as emails, the bracelet will vibrate and
displayother reminder icons, click to view the content.
Charging reminder: When the bracelet is connecteto the power supply or the
charging stand is chargithe motor will vibrate. Pay attention to the low
orfull power state, and the bracelet will not vibrate.
Sleep detection function
When falling asleep, the bracelet will automaticalldetermine to enter the
sleep monitoring mode, automatically detect your deep sleep/light
sleep/awake time all night, and calculate your sleequality; sleep data is only
supported on the APP sifor the time being.
Note: Sleep data will only be available when you wear the bracelet to sleep.
camera control
APP side: Shake 1 to take pictures remotely; the Bluetooth connection status
must be guaranteed
restore device
APP side–restore device-can delete all history records on APP and device
common problem
-
Waiting too long for the first heart rate test?
When testing your heart rate for the first time, you need to collect long signals according to different groups of people to accurately calculate your heart rate. -
What should I do if the bluetooth connection fails?
(connection/reconnection failed or connection reconnection is slow)
Confirm whether your device is IOS9.0 and Android 4.4 and above and supports
bluetooth
Teeth 5.0.
Due to the problem of signal interference in the Bluetooth wireless
connection, the time of each connection may vary.
Bluetooth device interference environment
- Turn off the bluetooth and turn it on again
- Close the phone background application or restart the phone
- Do not connect the phone to other Bluetooth devices or functions at the same time.
- Whether the APP is running normally in the background, if it is not in the background, it may not be able to connect.
Can’t find the bracelet?
Because the bracelet is not searched by the mobile phone during the Bluetooth
broadcast, please ensure that the bracelet is powered, activated, and not
bound to other mobile phones, and then move the bracelet close to the mobile
phone. If it still does not work, please turn off the mobile phone Bluetooth
for 20 seconds. Then restart the phone’s bluetooth.
Why should I wear my bracelet tighter when measuring heart rate?
The bracelet adopts the principle of light reflection. After the light source
penetrates the skin, it collects the signal reflected to the sensor to
calculate your heart rate. If it is not worn tightly, ambient light will enter
the sensor, which will affect the measurement accuracy.
Why don’t I receive a reminder when the reminder function is turned on?
Android phone: Confirm that the phone and the bracelet are connected, and then
open the corresponding permissions in the phone settings to allow the
“GloryFit” APP to access incoming calls, text messages, Contacts, and keep
“GloryFit” running in the background; if the phone has security software
installed, please add “GloryFit” as trust.
Apple mobile phone: If there is no reminder after connecting, it is
recommended to restart the mobile phone to reconnect.
When connecting the bracelet again, you must wait for the phone to pop up
[Bluetooth pairing request], and click [Pairing] to have a reminder.
Is the bracelet waterproof?
It supports IP67 waterproof and dustproof grade (IP67 standard is 35 degrees
of water, soaking in water at a depth of 1 meter for 30 minutes), and can be
worn as you like when washing hands, raining, showering in cold water, and
washing cars.
Does the bluetooth connection need to be always on? Is there still data after
disconnection?
Before the data is synchronized, the data is retained on the band host (the
data can be retained for seven days). When the Bluetooth connection between
the mobile phone and the bracelet is successful, the bracelet data will be
automatically uploaded to the mobile phone, please synchronize the data to the
mobile phone in time.
Note: If you turn on the call and SMS reminder function, you must keep the
Bluetooth connected, and the alarm clock reminder supports offline.
warn:
Please consult your doctor before starting new sports.
Although the smart bracelet can monitor real-time dynamic heart rate, it
cannot be used for any medical purpose.
You can contact our after sales team to assist you with connection or any
questions, thank you
WhatsApp:+8618794363304
GA99805@163.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>