Fisher-Price GNG37 85 Class 4 Series 4K UHD HDR Smart Roku TV Owner’s Manual

: June 15, 2024
: fisher-price

Table of Contents

Fisher-Price GNG37 85 Class 4 Series 4K UHD HDR Smart Roku TV
Product Information
Product Usage Instructions
BEFORE YOU BEGIN
ASSEMBLED PARTS
USING THE TRAY
OPENING THE FRAME
CARE
CLOSING THE FRAME
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Fisher-Price GNG37 85 Class 4 Series 4K UHD HDR Smart Roku TV

Product Information

Specifications

Model: GNG37
Manufacturer: Fisher-Price, Inc.
Address: 636 Girard Avenue, East Aurora, NY 14052
Consumer Services: 1-800-432-5437

Product Usage Instructions

Before You Begin

Before starting the assembly process, please ensure that you have read and understood the user manual. If you have any questions or concerns, please contact our consumer services.

Assembly

Follow the steps below to assemble the product:

Step 1: Frame and Front Base Assembly

The frames and the front base are designed to fit in a specific way. If these parts do not snap together, try fitting each frame into the opposite socket in the front base.

Step 2: Rear Base Attachment

Pull on the rear base to ensure it is securely attached.

Step 3: Seat Ring Assembly

If you cannot snap the parts into place, you may have assembled the seat ring backward. Remove the seat ring from the frames and turn it around so that the wider, flat side is toward the front base. Then, repeat this assembly step.

Step 4: Pad Attachment

Fit the end of the pad with the pegs down through the seat ring.

Step 5: Canopy Assembly

The canopy hubs are keyed to the frame sockets. Locate the tab on each canopy hub and match it to the notch on the outside of each frame socket. If you cannot snap the parts into place, you may not have matched the canopy hub tabs to the frame socket notches. You may need to turn the canopy around or rotate the canopy hubs. Refer back to step 9 for more details.

Placing and Removing Baby

To place or remove a baby from the product, follow these steps:

Place the assembled product on the floor.
Kneel or stand behind the seat.
Fit or remove the baby’s legs into or from the leg openings in the seat pad.
Carefully lower or lift the baby into or out of the seat.

Using the Tray

To use the tray, follow these steps:

Ensure that the tray is securely attached to the product.
Place food or other items on the tray for the baby to access.

Using the Canopy

To use the canopy, follow these steps:

Lift and lower the canopy as needed.

Care and Maintenance

Follow these instructions to clean and maintain the product:

To clean the frame, canopy, and tray, wipe using a mild cleaning solution and a damp cloth. Do not use bleach or harsh/abrasive cleaners. Rinse clean with water to remove soap residue.
The tray is top-rack dishwasher safe. Alternatively, you can use the bottom rack without using the drying cycle.
Machine wash the pad in cold water with a mild detergent on a gentle cycle. Do not use bleach. Tumble dry on low heat.
To remove the pad, lift to remove the pad pegs from the front base. Then, remove the pad button holes from the pegs underneath the seat ring.
To replace the pad, follow the assembly steps.

FAQ

Q: How do I contact customer support?

A : For customer support, please call our Consumer Services at 1-800-432-5437.

BEFORE YOU BEGIN

IMPORTANT! Keep these instructions for future reference. Please read these instructions before assembly and use of this product.
Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges. Do not use the product if any parts are missing, damaged, or broken.
Do not use accessories or replacement parts other than those approved by the manufacturer
Adult assembly is required. No tools are required for assembly.
The tray is not microwave-safe.
Product images may vary from the actual product.
Your product may come with replacement warning labels which you can apply over the factory-applied warning label if English is not your primary language. Select the warning label with the appropriate language for you.
Before first time use, wash the tray thoroughly with soap and water.
Use only with a child who is able to hold his head up unassisted and who is not able to climb out or walk.
Maximum weight: 11,3 kg (25 lb)

WARNING

FALL HAZARD: Infants have suffered skull fractures falling while in and from floor seats:
Use ONLY on the floor.
NEVER use it on an elevated surface.
NEVER lift or carry the child in a product.
Use ONLY with a child who is able to hold his head up unassisted.
STOP using when the child can climb out or walk.
ALWAYS keep a child in view while in a product.
DROWNING HAZARD: Infants have drowned when the floor seat has been placed in a bathtub or pool.
NEVER use in or near water.

ASSEMBLED PARTS

Fisher-Price-GNG37-85-Class-4-Series-4K-UHD-HDR-Smart-Roku-TV-
FIG-1

ASSEMBLY

The frames and the front base are designed to fit one way. If these parts do not “snap” together, try fitting each frame into the opposite socket in the front base.
Pull on the rear base to be sure it’s attached.
If you cannot “snap” the parts into place, you may have assembled the seat ring backward.
Remove the seat ring from the frames and turn it around so that the wider, flat side is toward the front base. Then, repeat this assembly step.
Fit the end of the pad with the pegs down through the seat ring.
Fit the eight buttonholes on the pad to the eight pegs under the seat ring.
If you cannot “snap” the parts into place, you may not have matched the canopy hub tabs to the frame socket notches.
You may need to turn the canopy around or you may need to rotate the canopy hubs.
Refer back to step 9.

FABRIC SEAT HELPS BABY SIT UP!

Placing and Removing Baby
Place the assembled product on the floor.
Kneel or stand behind the seat and fit or remove the baby’s legs into or from the leg openings in the seat pad. Carefully lower or lift the baby into or out of the seat.

USING THE TRAY

Fisher-Price-GNG37-85-Class-4-Series-4K-UHD-HDR-Smart-Roku-TV-
FIG-13

USING THE CANOPY

OPENING THE FRAME

Lift the frames until each “snaps” into place.
Push down on the seat ring to be sure the frame is open.

CARE

To clean the frame, canopy, and tray, wipe using a mild cleaning solution and a damp cloth.
Do not use bleach. Do not use harsh or abrasive cleaners. Rinse clean with water to remove soap residue.
The tray is top-rack dishwasher safe (or use the bottom rack – without using the drying cycle).
Machine wash the pad in cold water with a mild detergent on a gentle cycle. Do not use bleach. Tumble dry on low heat.
To remove the pad, lift to remove the pad pegs from the front base. Then remove the pad button holes from the pegs underneath the seat ring.
To replace the pad, follow the assembly steps.