fisher-price HNX56 Baby Portable Chair Sit Me Up Floor Seat Owner’s Manual

: May 15, 2024
: fisher-price

Table of Contents

fisher-price HNX56 Baby Portable Chair Sit Me Up Floor Seat
Product Information
Product Usage Instructions
FAQ
BEFORE YOU BEGIN
ASSEMBLED PARTS
FABRIC SEAT HELPS BABY SIT UP
OPENING & CLOSING THE FRAME
CARE
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

fisher-price HNX56 Baby Portable Chair Sit Me Up Floor Seat

fisher-price-HNX56-Baby-Portable-Chair-Sit-Me-Up-Floor-Seat-
PRODUCT

Product Information

Specifications

Model: HNX56
No tools are required for assembly
The tray is not microwave-safe

Product Usage Instructions

Assembly

Adult assembly is required. Follow these steps:

Ensure frames and front base fit together one way.
If parts don’t snap together, try fitting each frame into the opposite socket in the front base.
Pull on the rear base to ensure attachment.
If parts don’t snap into place, check if the seat ring is assembled backwards. Turn it around so the wider, flat side faces the front base.
Press the ends of the latches and lift the tray to remove.
Lift frames until they snap into place. Push down on the seat ring to confirm the frame is secure.

Care and Maintenance

To clean the frame and toys, use a mild cleaning solution and a damp cloth. Avoid bleach or harsh cleaners. Rinse with water to remove soap residue. The tray is dishwasher safe (top rack recommended). Machine wash the pad in cold water on the gentle cycle; tumble dry on low heat. To remove the pad, lift it off the pad pegs from the front base. To replace, follow the assembly steps.

FAQ

Q: Is the tray microwave safe?
A: No, the tray is not microwave-safe. Do not put it in the microwave.
Q: How should I clean the product?
A: Use a mild cleaning solution and a damp cloth for the frame and toys. Machine wash the pad in cold water and avoid using bleach or harsh cleaners.

BEFORE YOU BEGIN

IMPORTANT! Please keep these instructions for future reference. Please read these instructions before assembly and use of this product.
I MPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. Do not use the product if any parts are missing, damaged or broken. Do not use accessories or replacement parts other than those approved by the manufacturer
Adult assembly is required. No tools are required for assembly. The tray is not microwave-safe.
Your product may come with replacement warning labels which you can apply over the factory-applied warning label if English is not your primary language. Select the warning label with the appropriate language for you
Before first time use, wash the tray thoroughly with soap and water
Use only with a child who is able to hold his head up unassisted and who is not able to climb out or walk. Maximum weight: 25 lb (11,3 kg)

CONSUMER INFORMATION

WARNING

FALL HAZARD: Infants have suffered skull fractures falling while in and from floor seats:
Use ONLY on the floor.
NEVER use it on an elevated surface.
NEVER lift or carry a child in the product.
Use ONLY with a child who is able to hold her head up unassisted.
STOP using when the child can climb out or walk.
ALWAYS keep a child in view while in the product.
DROWNING HAZARD: Infants have drowned when the floor seat has been placed in a bathtub or pool.
NEVER use in or near water.

ASSEMBLED PARTS

fisher-price-HNX56-Baby-Portable-Chair-Sit-Me-Up-Floor-Seat-
FIG-6

ASSEMBLY

The frames and the front base are designed to fit one way. If these parts do not “snap” together, try fitting each frame into the opposite socket in the front base.

Pull on the rear base to be sure it’s attached.

If you cannot “snap” the parts into place, you may have assembled the seat ring backwards. Remove the seat ring from the frames and turn it around so that the wider, flat side is toward the front base. Then, repeat this assembly step.

Fit the end of the pad with the pegs down through the seat ring.

Fit the eight buttons holes on the pad to the eight pegs under the seat ring.

Press the ends of the latches and lift the tray to remove.

FABRIC SEAT HELPS BABY SIT UP

Linkable, Removable Toys
Fit the link on each toy to a loop on the seat
Placing and Remove Baby
Place the assembled product on the floor. Kneel or stand behind the seat and fit or remove baby’s legs into or from the leg openings in the seat pad. Carefully lower or lift baby into or out of the seat

fisher-price-HNX56-Baby-Portable-Chair-Sit-Me-Up-Floor-Seat-
FIG-22

OPENING & CLOSING THE FRAME

Lift the frames until each “snaps” into place. Push down on the seat ring to be sure the frame is open
Fit the posts on the tray to the underside of the frame sockets for storage.
While pressing the button on each hub, lower the seat

CARE

To clean the frame and toys, wipe clean using a mild cleaning solution and a damp cloth. Do not use bleach. Do not use harsh or abrasive cleaners. Rinse clean with water to remove soap residue. The tray is top-rack dishwasher safe (or use the bottom rack – without using the drying cycle). Machine wash the pad in cold water on a gentle cycle. Do not use bleach. Tumble dry on low heat. To remove the pad, lift to remove the pad pegs from the front base. Then remove the pad button holes from the pegs underneath the seat ring. To replace the pad, follow the assembly steps.