fisher-price HMG51 Cool Lights and Sounds Cars Launcher Instruction Manual

: June 1, 2024
: fisher-price

Table of Contents

fisher-price HMG51 Cool Lights and Sounds Cars Launcher
Product Usage Instructions
BATTERY REPLACEMENT
BATTERY SAFETY INFORMATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

fisher-price HMG51 Cool Lights and Sounds Cars Launcher

fisher-price-HMG51-Cool-Lights-and-Sounds-Cars-Launcher-
product

Specifications :

Model : HMG51
Power: 1.5V x 2 AA (LR6) batteries
Usage: Not suitable for immersion

Product Usage Instructions

Battery Handling:

Protect the environment by not disposing of the products or batteries with household waste. Follow local recycling guidelines for proper disposal.

In case of battery leakage, which may occur in exceptional circumstances, follow these steps:

Use only recommended battery types: alkaline, standard (carbon-zinc), or rechargeable.
Always insert batteries correctly into the compartment following the polarity markings (+ and -).
Remove exhausted batteries from the product and dispose of them safely.
Avoid disposing of the product in a fire to prevent explosion or leakage of batteries.

FCC Statement (United States Only):

The equipment complies with Class B digital device standards and FCC regulations to minimize interference. Follow installation and usage instructions to prevent harmful interference to radio communications.

FAQ:

Q: What should I do if the product stops working or loses intensity?
- A : If the product stops working or loses intensity, check the battery compartment for proper battery installation and replace batteries if needed. Follow recycling guidelines for battery disposal.
Q: Can I charge the batteries included in the product?
- A : If rechargeable batteries are used, they should only be charged under adult supervision following the recommended equivalent charging method.

Press the handle to launch the cars with cool lights and sounds!

BATTERY REPLACEMENT

fisher-price-HMG51-Cool-Lights-and-Sounds-Cars-Launcher-
fig1

Slide the power-volume switch to ON with low volume ON with high volume or OFF 0 .
Loosen the screw in the battery compartment door with a Phillips screwdriver and remove the door.
Remove the exhausted batteries and properly dispose.
Insert two, new AA (LR6) batteries.
Replace the battery compartment door and tighten the screw. Do not over-tighten.
If this toy begins to operate erratically, you may need to reset the electronics. Slide the power-volume switch off and back on.
When sounds or lights from this toy become faint or stop, it’s time for an adult to change the batteries.

Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.

BATTERY SAFETY INFORMATION

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product.

To avoid battery leakage:

Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable.
Insert batteries as indicated inside the battery compartment (+ and -).
Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.
Never short-circuit the battery terminals.
Use only batteries of the same or equivalent type, as recommended.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the product before charging.
If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

FCC STATEMENT (UNITED STATES ONLY)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Consult the dealer or an experienced radio/TV technician for help.
- NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-3 (B)/NMB-3 (B)

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

service.mattel.com

UNITED STATES

1-800-432-5437. Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
CANADA
Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
1-800-432-5437

AUSTRALIA

Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.

NEW ZEALAND