fisher-price HXX58-0970 Retro Toy for Kids Owner’s Manual
- June 1, 2024
- fisher-price
Table of Contents
fisher-price HXX58-0970 Retro Toy for Kids
Specifications
- Requires: 4 AA batteries (included)
- Battery Type: 1.5V x 4 AA (LR6) – Use alkaline batteries for longer life
Product Usage Instructions
1. Initial Setup
Before first time use, remove the paper record from the turntable and properly dispose of it. Remove any adhesive left on the turntable.
2. Playing a Record
- Select a record and remove it from its sleeve.
- Place the record on the turntable.
- Lift the tone arm and place it down onto one of the tracks to begin playing music.
3. Adjusting Volume
Turn the knob to adjust the volume. There are 6 volume levels. Make sure to check the volume level if you don’t hear any music.
4. Power Management
If left unattended, the record player will play music for approximately 3-4 minutes before entering sleep mode. To wake it up, lift and place the tone arm back on the record.
5. Cleaning and Maintenance
Wipe the record player with a clean, damp cloth. Clean records and sleeves with a dry cloth. Avoid using water on records as it may damage the label. Keep the lens clean by wiping with a damp cloth.
FAQ
- Q: What type of batteries should I use?
- A: Use 1.5V x 4 AA (LR6) alkaline batteries for longer product life.
- Q: How do I wake up the record player from sleep mode?
- A: Lift the tone arm and place it back down onto the record to wake up the player.
Keep this instruction sheet for future reference, as it contains important information
Parts
Product Usage Instructions
Let’s put a record on!
-
Before first time use, remove the paper record from the turntable and properly dispose of it. Make sure to also remove and dispose of any adhesive that may be left on the turntable.
-
Select a record and remove it from its sleeve.
-
Place the record on the turntable. Each record has two tracks per side, as indicated by 1 and 2 in the image above. Lift the tone arm and place it down onto one of the tracks to begin playing music!
-
Turn the knob to adjust the volume. There are 6 volume levels.
Note: The volume can be turned all the way down to zero. If music should be playing but you don’t hear anything, check the volume and turn it up if necessary. -
Dance to the beat!
If left unattended, the record player will continue to play music for approximately 3-4 minutes. Then, it will stop, and the record player will enter “sleep” mode. To “wake” the record player, lift the tone arm and place it back down onto the record again.
Batteries and Power
-
Locate the battery compartment on the bottom of the record player.
-
Loosen the screw in the battery compartment door and remove the door. Remove the exhausted batteries and properly dispose.
-
Insert four, new AA (LR6) alkaline batteries into the battery compartment.
-
Replace the battery compartment door and tighten the screw.
Slide the power switch to ON or 0 OFF. -
When sounds or motion become faint, slow or stop, it’s time for an adult to change the batteries.
-
If this toy begins to operate erratically, you may need to reset the electronics. Slide the power switch off and back on again.
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:
- Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable.
- Insert batteries as indicated inside the battery compartment (+ and -).
- Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.
- Never short-circuit the battery terminals.
- Use only batteries of the same or equivalent type, as recommended.
- Do not charge non-rechargeable batteries.
- Remove rechargeable batteries from the product before charging.
- If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities
Care
The record player may be wiped with a clean, damp cloth. Records and sleeves
may be wiped with a clean, dry cloth. Do not use water to clean the records as
it may damage the label.
Contact
- UNITED STATES
- Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Consumer Services: 1-800-432-5437.
- CANADA
- Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2 Consumer Services/Service à la clientèle : 1-800-432-5437. www.service.mattel.com.
- GREAT BRITAIN
- Mattel U.K. Limited, The Porter Building, 1 Brunel Way, Slough SL1 1FQ, UK. www.service.mattel.com/uk.
- NEDERLAND
- Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
- AUSTRALIA
- Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
- NEW ZEALAND
- 16-18 William Pickering Drive, Albany 1331, Auckland.
- SOUTH AFRICA
- Mattel South Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard, Johannesburg 2196.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.