fisher-price 782FP Iris 4 in 1 Convertible Crib Owner’s Manual

fisher-price 782FP Iris 4 in 1 Convertible Crib

Specifications

• Brand: Iris
• Model: 4 in 1 Convertible Crib
• SKU: 782FP
• Recommended Age: 0-6 years
• Material: Wood
• Color: Varies

Assembly

1. Read all instructions carefully before assembling the product.
2. Ensure adult assembly is required.
3. Identify all parts and hardware before starting the assembly process.
4. Assemble the crib on a soft surface to protect the parts.

Mattress Recommendation
For a safe and comfortable sleep experience, we recommend using a Dream On Me or Evolur Greenguard Gold Certified Full-Size Mattress.

Cleaning Instructions
To clean the surface of the crib, use only water on a damp cloth. Do not use window cleaner or abrasive cleaning products as they may damage the protective coating.

Frequently Asked Questions (FAQ)

1. Q: What age range is suitable for this crib?
   A: The crib is suitable for children aged 0-6 years.

2. Q: Can I use a different brand of mattress with this crib?
   A: For safety reasons and a comfortable sleep experience, we recommend using a Dream On Me or Evolur Greenguard Gold Certified Full-Size Mattress.

3. Q: How should I clean the crib?
   A: Use only water on a damp cloth to clean the surface of the crib. Avoid using window cleaner or abrasive products that may  damage the protective coating.

OWNER’S MANUAL

Read all instructions before assembling and using product.
IMPORTANT – Keep instructions for future use.

Scan the QR code to register your product
From mealtime to downtime, step to crawl, the Fisher-Price by Dream On Me collection enables the modern parent to create experiences with multipurpose pieces.
Offering an entire range of nursery must-haves for infants to toddlers, each piece is playful, fun and aims to ensure that every child’s imagination is always at play… wherever, whenever.

SAFE SLEEP TIPS

WARNINGS

• FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
• TO REDUCE THE RISK OF SIDS (SUDDEN INFANT DEATH SYNDROME), PEDIATRICIANS RECOMMEND HEALTHY INFANTS BE PLACED ON THEIR BACKS TO SLEEP UNLESS OTHERWISE ADVISED BY YOUR PHYSICIAN.
• CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS, OR SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE.
• DO NOT USE THIS CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN. CONTACT DREAM ON ME – 45 VERONICA AVENUE SOMERSET NEW JERSEY 08873 FOR REPLACEMENT PARTS.
• DO NOT USE A WATER MATTRESS WITH THIS CRIB.
• IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.

STRANGULATION HAZARD

• STRINGS CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING AROUND A CHILD’S NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS. DO NOT SUSPEND STRINGS OVER A CRIB OR ATTACH STRINGS TO TOYS.
• TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN TRAP PARTS OF THE BODY OR CLOTHING ON LOOSE FASTENERS.
• DO NOT PLACE A CRIB NEAR THE WINDOW WHERE CORDS FROM BLINDS OR DRAPES MAY STRANGLE A CHILD.
• INFANTS CAN SUFFOCATE ON SOFT BEDDING.
• NEVER ADD A PILLOW, COMFORTER, OR PADDING.
• NEVER PLACE ADDITIONAL PADDING UNDER THE INFANT.
• NEVER USE PLASTIC SHIPPING BAGS OR ANY PLASTIC FILM AS MATTRESS COVERS, BECAUSE THEY CAN CAUSE SUFFOCATION.
• INFANTS CAN SUFFOCATE IN GAPS BETWEEN CRIB SIDES AND A MATTRESS THAT IS TOO SMALL.

FALL HAZARD

• WHEN A CHILD CAN PULL TO A STANDING POSITION, SET THE MATTRESS TO THE LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS, AND OTHER OBJECTS THAT COULD SERVE AS STEPS FOR CLIMBING OUT.
• STOP USING THE CRIB WHEN THE CHILD BEGINS TO CLIMB OUT OR REACHES THE HEIGHT OF 35 IN (89 CM).
• WHEN STORING A CRIB USE CAUTION AS EXTREME CHANGES IN TEMPERATURE OR HUMIDITY CAN COMPROMISE THE CRIB MAKING IT EXTREMELY DANGEROUS TO YOUR CHILD.
• USE CAUTION WHEN A VAPORIZER OR HUMIDIFIER IS IN USE. ALWAYS AIM VAPOR AWAY FROM THE CRIB AS WELL AS ANY OTHER WOODEN FURNITURE. PROLONGED PERIODS OF HUMIDITY IN STORAGE AS WELL AS IN THE HOME CAN COMPROMISE THE CRIB.
• AVOID USING VAPORIZERS AND HUMIDIFIERS FOR PROLONGED PERIODS.
• FOLLOW WARNINGS ON ALL PRODUCTS IN THE CRIB.
• CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 IN (69 CM) BY 51-5/8 IN (131 CM), WITH A THICKNESS NOT EXCEEDING 6 IN (15 CM) AND A MINIMUM THICKNESS OF 4 IN (10 CM).

TODDLER BED

Failure to follow these warnings and the instructions could result in serious injury or death.

WARNING :

• INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.
• Openings in and between bed parts can entrap head and neck of a small child. NEVER use bed with children younger than 15 months.
• ALWAYS follow assembly instructions.
• The maximum user weight is 50Ibs(22.7kg)

WARNING

STRANGULATION HAZARD

• NEVER place bed near windows where cords from blinds or drapes may strangle a child. NEVER suspend strings over a bed.
• NEVER place items with a string,cord,or ribbon,such as hood strings or pacifier cords, around a child’s neck. These items may catch on bed parts.

CAUTION
ENTRAPMENT HAZARD
To avoid dangerous gaps, any mattress used in this bed shall be a full-size crib mattress at least 51 5/8 in (1310mm) in length, 27 1/4 (690mm) in width and a max thickness of 5 in(125mm).

NOTES ON ASSEMBLY

• During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on the diagram of the item which is drawn actual size and design. Be sure to use the proper size and shape specified in the instructions.
• To assemble this unit you may be required to place the unit on it’s side and face. It is strongly recommended that assembly is done on a soft, non-abrasive surface to avoid damaging the finish.

NOTES ON USE

• Keep children and others safe by following these simple rules:
• Do not allow any child to play on furniture.
• Do not allow climbing on any piece of furniture.
• Do not allow hanging from any piece of furniture.
• Always monitor your child’s activity when in the nursery.

NOTES ON CARE AND MAINTENANCE

• Do not scratch or chip the finish.
• Inspect the product periodically, and contact Dream On Me for replacement parts or questions.
• Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a damp, cold basement. These extremes can cause a loss of structural integrity.
• To preserve the luster of the high-quality finish on your product, it is recommended to place a doily on a felt pad under any items you place on the finish.
• Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty of this fine finish.
• Do not use abrasive chemicals.
• Do not spray cleaners directly onto the furniture.
• Lift slightly when moving on carpeting to prevent leg breakage.
• The use of a vaporizer near furniture will cause wood to swell and finish to peel.

PARTS

If there are any missing parts, please contact Dream On Me before using the product.

HARDWARE

If there are any missing parts, please contact Dream On Me before using the product.

CRIB ASSEMBLY – LEGS ASSEMBLY

• Align the Legs (3) to the Crib End (1) as shown in the illustration.
• Align and insert the Bolts (B) in the insertions providedon the crib end panel. Tighten them using the Allen Key (F) provided.
• Repeat the steps for the second crib end panel and legs.

• Align the Conversion Rail (5) between the assembled legs as shown in the illustration.
• Position the Wooden Dowels (D) between the conversion rail and legs.
• Position the Half Moon Washer (E) in the slots of the conversion rails. Align and insert the Bolts (A) in the half moon washers.
• Tighten the bolts using the Allen Key (F) provided to firmly fix the conversion rails to the legs.\

• Align the Mattress Support Panel (6) to all the corners of the crib as shown in the illustration.
• Position the Wooden Dowels (D) in the center insertions between the mattress support panel and conversion rail.
• Use the Bolt (C) to attach the Mattress Support Panel to the corners of the crib.
• Note that the Lowest position of the Mattress Support Panel will be for Toddlers (babies who can stand up and walk), the Mid position is for (D) infants (babies who start to turn and sit up) and the Highest Position is for newborn babies.
• Ensure that the Mattress Support Panel is flat side up and not at a slant.

NOTE

• The Warnings printed on the pouch attached to the mattress support panel must face up, and the springs must face up.
• This crib has adjustment positions. Use the highest only for newborns, and move the mattress down as the child grows.

WARNING

Fall Hazard: When a child can stand, set the mattress at the lowest position and remove bumper pads, large toys, and other items that could serve as steps for climbing out.

• Align the Crib Side (4) between the crib end panels of the half-assembled crib.
• Align and insert the Bolts (A) in the insertions provided in the side panels.
• Tighten the Bolts (A) using the Allen Key (F) provided to fix the side panels firmly to the half-assembled crib.

• Align the Crib End Top (2) over the crib end panels as shown in the illustration.
•  Align and insert the Bolts (A) in the insertions provided on the side panels.
•  Tighten the bolts using the Allen Key (F) fixing the crib end top panels firmly to the crib.

• Disassemble the Crib End Top and the Crib Side by following the assembly steps in reverse as shown in the illustration.

• Align the Guard Rails (7) to one of the crib end panels as shown in the illustration.
• Align and insert the Bolts (A) in the top and bottom insertions provided on the guard rails.
• Tighten the bolts using the Allen Key (F) to fix the guard rails firmly to the bed.

NOTE:
Make sure the mattress support panel is at the lowest position.

• Attach the Toddler Guard Rail to the half-assembled toddler bed.
• Make sure to follow the complete instructions provided with the Toddler Guard Rail.

NOTE:

• Make sure the mattress support panel is at the lowest position.
  Toddler Guard Rail (NOT INCLUDED, SOLD SEPARATELY)

• Disassemble the Crib End Tops and one of the Crib Side by following the assembly steps in reverse as shown in the illustration to use the crib as a Daybed.

FURNITURE CARE INSTRUCTIONS

ROOM CLIMATE CONTROL

• Wood, when first cut contains more than 50 percent water. When it is prepared for furniture construction it is placed in a Kiln and the moisture content is brought down to 8 to 10 percent. Wood is porous and responds to its environment. If the room has high humidity it will absorb it and expand and if the humidity is low it will lose moisture and shrink.
  It is important that the humidity levels in the room be controlled from extremes of too much humidity or too little. Furniture should not be placed close to the air-conditioning outlets, fire places, radiators, space heaters, humidifiers or dehumidifiers. Exposure to extreme variations of temperature and humidity can damage any fine wood product.

THE IDEAL ENVIRONMENT FOR FINE FURNITURE:

• Fine wood furniture will have fewer problems when its environment is controlled at a temperature between 65 and 75 degrees and a relative humidity between 35 and 40 percent. Wood placed in an environment outside of those limits can and will shrink or expand and may develop some small cracks which are not material or structural defects.

STICKING DOORS AND DRAWERS:

• With the minor changes in temperature and humidity, doors and drawers may swell and be difficult to open or close. Tolerances have been built into the units but extreme conditions may still cause sticking. This will adjust back to normal over time but until it does consider using a dehumidifier or rub candle wax or paraffin on sides that stick.

AVOID DIRECT SUNLIGHT

• Keep the furniture out of direct sunlight. Ultraviolet rays will fade colors and in some cases darken them. It can also cause crazing or hair line cracks in the finish. White finishes will yellow naturally over time and exposure to direct sunlight will hasten this natural process along with some woods darkening naturally over time; this is not considered to be a quality defect.

PROPER STORAGE
If you need to put your furniture in storage for any period of time do not store them in a damp basement or hot dry attic. Allow air movement around the furniture and do not stack anything on it.

IN GENERAL

• Protect furniture surface from hot or extremely cold items.
• Use coasters under hot or cold beverages.
• Do not use synthetic fabric under accessories or lamps.
• Protect tops from pens, markers and crayons.Oils from potpourri and other scented items can damage the finish of the furniture.
• Do not drag items across the surface of the furniture.
• Allow the surface to breath by rotating your accessories and lamps.
• Do not over polish the furniture, do it only two or three times a year. Over polishing can distort the natural finish of the product.
• Do not wax the furniture, as wax build up can destroy natural finish of the product.
• When moving furniture always lift the unit. Do not push or drag it to avoid damage to legs.
• Keep the furniture level so doors and drawers open and close freely.
• Clean with a damp, not wet, cloth. Use only a mild soap. Do not use the abrasive cleaners.
• Do not scratch or chip the finish.
• Inspect the product periodically, contact Dream on me for replacement parts or questions.
• Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a damp, cold basement. These extremes can cause a loss of structural integrity.
• To preserve the luster of the high-quality finish on your product, it is recommended to place a doily or felt pad under any items you place on the finish.
• Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty of this fine finish.
• Do not use abrasive chemicals.
• Do not spray cleaners directly onto furniture.
• Lift slightly when moving on carpeting to prevent leg breakage.
• Use of a vaporizer near furniture will cause wood to swell and to peel.

YOU DID IT!

Congratulations Mom & Dad!
It’s time to create your dream nursery. A safe, elegant handcrafted crib that grows with your little one.

45 VERONICA AVENUE SOMERSET NEW JERSEY 08873

www.dreamonme.com
FISHER-PRICE™ and associated trademarks are owned by and used under license from Mattel. ©2023 Mattel.

Scan the QR code to register your product Scannez le code

References

• One moment, please...

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>