Canon 4113C002 EXT. RF1.4X(N) Standard Lenses Instruction Manual
- June 15, 2024
- Canon
Table of Contents
Canon 4113C002 EXT. RF1.4X(N) Standard Lenses
Nomenclature
- Mount index (lens side)
- Mount index (camera side)
- Lens release lever
- Rubber ring
Thank you for purchasing a Canon product.
The Canon Extender RF1.4x and Extender RF2x increase the focal length of the
attached RF lens by 1.4x and 2x respectively. When Extender RF1.4x is
attached, the lens maximum aperture will be smaller (darker) by 1 stop. With
Extender RF2x, the maximum aperture will be smaller by 2 stops. In any case,
the camera will compensate the exposure automatically
Product Description
Attaching and Detaching the Extender
- First attach the Extender to the lens, then attach it to the camera.
- To detach it, follow the same procedure in reverse.
- To detach the Extender from the lens, slide the lens release lever and then turn the Extender counterclockwise.
Safety Precaution
- Do not leave the product in excessive heat such as in a car in direct sunlight. High temperatures can cause the product to malfunction.
- You cannot attach two or more Extenders on the same camera.
- The rear mount on the Extender has been fitted with a rubber ring to improve dust-resistance and water-resistance performance. This rubber ring may cause friction marks to appear around the camera’s lens mount, although this will have no effect on usage. Rubber rings can be replaced at Canon Service Center (chargeable).
- Using the Extender may limit the minimum shooting length possible according to the product’s specifications.
- Autofocusing slows down when the lens is used with the Extender, in order to maintain the precision of autofocus control.
Usable RF Lenses
- RF600mm F11 IS STM
- RF800mm F11 IS STM
- RF 100-500mm F4.5-7.1 L IS USM
Specifications
- Mount : Canon RF mount
- Lens construction : RF1.4x: 7 elements in 4 groups / RF2x: 9 elements in 5 groups
Dimensions (Max. dia. x length):
- RF1.4x: Approx. 71.2 dia. x 20.3 mm / 2.8 x 0.8 in.,
- RF2x: Approx. 71.2 dia. x 39.3 mm / 2.8 x 1.5 in.
- Weight : RF1.4x: Approx. 225 g / 7.9 oz.,/ RF2x: Approx. 340 g / 12.0 oz.
- Case : LP811
- Front Cap: Extender Cap RF
- Rear Cap: Lens Dust Cap RF
- The maximum diameter, length and weight listed are for the Extender itself only.
- All data listed is measured according to Canon standards.
- Product specifications and appearance are subject to change without notice.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FAQs
What is the Canon 4113C002 EXT. RF1.4X(N) Standard Lens?
The Canon 4113C002 EXT. RF1.4X(N) Standard Lens is a lens accessory designed to extend the focal length of compatible Canon RF lenses.
Which Canon RF lenses are compatible with this extender?
This extender is typically compatible with specific Canon RF lenses. Refer to the product documentation for a list of compatible lenses.
What is the purpose of using a lens extender?
A lens extender is used to increase the focal length of a lens, effectively providing a zooming effect and allowing you to capture distant subjects more closely.
How much does the Canon 4113C002 EXT. RF1.4X(N) extend the focal length?
This extender typically extends the focal length by a factor of 1.4x, meaning it increases the zoom capability of your lens by 1.4 times.
Is the image quality affected when using an extender?
Using an extender can have a slight impact on image quality, including reduced aperture and potential degradation of sharpness, but modern extenders are designed to minimize these effects.
Is the Canon 4113C002 EXT. RF1.4X(N) easy to attach to a compatible lens?
Attaching the extender is typically a straightforward process. Follow the instructions in the user manual for proper installation.
Does the extender maintain autofocus capability?
In many cases, this extender will maintain autofocus functionality with compatible lenses. Check the documentation for specific lens compatibility and autofocus details.
Can I use this extender with other brands of lenses?
This extender is primarily designed for use with Canon RF lenses and may not be compatible with lenses from other manufacturers.
What is the minimum focusing distance with this extender attached?
The minimum focusing distance may vary depending on the lens you use with the extender. Refer to the lens and extender documentation for specific details.
Is the Canon 4113C002 EXT. RF1.4X(N) weather-sealed?
This extender may have weather-sealing features, but it's essential to check the product specifications for the level of weather resistance it offers.
Does the extender come with a warranty?
Canon products typically come with a warranty. Refer to the warranty information provided by Canon for details on coverage and duration.
What is the weight and dimensions of this extender?
The weight and dimensions of the Canon 4113C002 EXT. RF1.4X(N) can be found in the product specifications provided by Canon.
Can I use multiple extenders together for greater zoom?
Using multiple extenders together may be possible with some lenses, but it's essential to follow the manufacturer's guidelines and consider potential image quality trade-offs.
Is the extender compatible with lens filters and hoods?
Compatibility with lens filters and hoods may vary depending on the lens and extender combination. Check the documentation for specific details.
Can I use this extender for video recording?
The extender can be used for video recording with compatible lenses, but consider the potential impact on autofocus and image quality.
Where can I find additional information and support for this extender?
For additional information, user manuals, and support, visit the official Canon website or contact Canon customer support.
Download This PDF Link:Canon 4113C002 EXT. RF1.4X(N) Standard Lenses Instruction Manual
References
Canon 4113C002 EXT. RF1.4X(N) Standard Lenses Instruction Manual- Device.Report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>