hama 00200012 PD-27W60 Powerbank 26800mAh Instruction Manual

: June 15, 2024
: Hama

Table of Contents

hama 00200012 PD-27W60 Powerbank 26800mAh
Operating instruction
Care and Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hama 00200012 PD-27W60 Powerbank 26800mAh

Operating instruction

Controls and Displays

On/Off button
USB port
USB port
USB-C port IN/OUT (Power Delivery)
LED capacity indicator
USB-C cable

Thank you for choosing aHama product.
Take your time and read the following instructions and information completely.Please keep these instructions in asafe place for futurereference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning

This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.

Note

This symbol is used to indicate additional information or important notes.

Package Contents

Power Pack 26800 mAh *, with Power Delivery
USB-C to USB-C charging cable
These operating instructions

Safety Notes

The product is intended for private, non-commercial use only.
Protect the product from dirt, moistureand overheating, and only use it in adry environment.
Keep this product, as all electrical products, out of the reach of children!
Donot drop the product and do not expose it to any major shocks.
Donot operate the product outside the power limits given in the specifications.
Donot open the device or continue to operate it if it becomes damaged.
Dispose of packaging material immediately according to locally applicable regulations.
Since the battery is integrated and cannot be removed, you will need to dispose of the product as awhole. Do this in compliance with the legal requirements.
Donot modify the product in any way.Doing so voids the warranty.
Donot throw the battery or the product into fire.
Donot tamper with or damage/heat/disassemble the batteries/rechargeable batteries.

Note –Power Delivery (PD)

To find out whether your terminal device supports Power Delivery (PD), please refer to the product information or operating instructions of the device manufacturer or to information available on the Internet.

Operation

Charging the Power Pack

Begin charging the power pack by connecting the included USB-C charging cable to the power pack’sUSB-C input (IN 5V/3A; 9V/3A; 12V/2.5A; 15V/2A; 20V/1.5A)and to asuitable PD charger.Alternatively,you can charge the power pack using aUSB-AtoUSB-C charging cable and a suitable USB charger.Please refer to the operating instructions for the USB charger used.
Charging begins and ends automatically.
Charge the Power Pack fully beforeusing it for the first time.

Note – Capacity

The capacity is always shown when the Power Pack is charging.
Each status LED corresponds to 25% of the capacity. When an LED is permanently illuminated, this indicates that this capacity level has already been reached. The Power Pack is charged to at least 75% if three LEDs are illuminated, and the fourth is flashing.
If all four status LEDs light up, the full capacity is available.
Press the button of the Power Pack to switch it on and to check its current capacity.
The power pack switches off automatically after about 10 seconds.

Warning – Battery

Only use suitable charging devices or USB connections for charging.
Asarule, do not charge devices or USB connections that are defective and do not try to repair them yourself.
Do not overcharge the product or allow the battery to completely discharge.
Avoid storing, charging or using the device in extreme temperatures and extremely low atmospheric pressure (for example, at high altitudes).
When stored over a long period of time, batteries should be charged regularly (at least every three months).

Charging terminal devices

Connect the included USB-C charging cable to the power pack’s USB-C connection (see 8. Technical Data) and to the USB-C connection of your terminal device (smartphone, tablet, notebook, etc.) to charge your terminal device with Power Delivery. Alternatively, connect a suitable charging cable for your terminal device to one of the two USB outputs to charge your terminal device.
Charging begins automatically. The status LEDs show the remaining capacity when the Power Pack is charging.
The current battery status of your terminal device will appear on this device.
Charging ends automatically. Then disconnect the power pack from your terminal device.
The Power Pack will automatically switch off if it is not connected to a terminal device.

Warning – Connecting terminal devices

Before connecting a terminal device, check whether the power output of the charger can supply sufficient power for the device.
Ensure that the total power consumption of the connected terminal device does not exceed the limit value (see point 8 Technical Data).
Please refer to the instructions in the operating manual of your terminal device.
It is essential that you observe these specifications and the safety instructions regarding the power supply of your devices.
The power pack must not be charged and discharged at the same time!

Note – Optimised charging

Optimised charging means that the Power Pack recognises the connected terminal device and supplies it with the optimal current to minimise charging time.

Warning

Never connect the charging cable of the Power Pack to both the input and the output of the Power Pack at the same time. This could damage the battery.
Do not connect any terminal devices while the Power Pack is charging. This could damage the Power Pack and the connected device.

Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-0 (German/English) Further support information can be found here www.hama.com

Technical Data

USB-C input

|

20 V

| 5V 3A/

9V 3A/

12 V 2.5 A/

15 V 2A/

1.5 A (PD 30W max.)

---|---|---

USB-C output

|

20 V

| 5V 3A/

9V 3A/

12 V 3A/

15 V 3A/

3A (PD 60W max.)

3300 mAh *

Total energy| typ. 96.48 Wh / min. 95.04 Wh

Recycling Information

Note on environmental protection: After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/Batteries, you are making an important contribution to protecting our environment.