TESmart PKS0802A10 4 Port KVM Switch Dual Monitor DisplayPort User Manual

TESmart PKS0802A10 4 Port KVM Switch Dual Monitor DisplayPort User Manual

4-Port Dual Monitor DP KVM Switch

USER MANUAL

ENJOY THE VIVID WORLD

DP. Dual

Features

• Using only 1 set of keyboard, mouse and 2 monitors to control 2 computers
• Support 2 monitors to display the desktop of 1 computer or to display 2 desktops at the same time.
• Support Unix/Windows/Debian/Ubuntu/Fedora/Mac OS X/Raspbian/Ubuntu for Raspberry Pi and other Linux basic system
• Support resolution up to 3840*2160@60HZ
• Support hot plug, disconnect or connect devices to the KVM at any time without turning off PC
• Support front panel button, keyboard hotkeys, IR remote control and RS232 to control KVM
• Available to use keyboard and mouse without any delay after switching input sources
• With extra USB 2.0 port, it is possible to connect bar code scanner, USB hard device or other USB device
• Support keyboard and mouse pass through mode to improve KVM compatibility
• Support auto switch to monitor computers in a specified time interval
• Support DCCI

Packing List

1 Dual Monitor DP KVM Switch
1 IR remote control
1 IR Receiver cable
1 DC 12V power adapter
1 3 Pins Connector(For RS232)
2 Rack-eras
1 AUX Cable
1 User manual

Panel Description

Connection Diagram

Step 1: Connect the two outputs of the PC1 to the Input A and Input B of the KVM PC1 inputs.
Connect the USB of the PC to the USB of the KVM PC1 inputs with USB type A to B cable

Note: Both Input A and Input B should be connected to the same computer. If connect only one of them, then the dual monitor function would not work properly.

Step 2: Connect keyboard, mouse and monitors to the specified ports.

Step 3: Connect speakers, USB devices, Ext. IR and RS232 to the KVM.

Step 4: Directly connect the DCCI port of first KVM switch according to above steps, in order to realize simultaneous display of 4 monitors

Cascade Diagram

Note: The slave only connects to monitors and computers.
Computers need to connect 4 P cables simultaneously.

Step 5: Turn on the power switch to start the Dual Monitor KVM.

How To Use

1. Set up the connection according to the connection diagram.
2. After all the PCs are started in step 1, then you can control the Dual Monitor KVM by keyboard hot keys, IR control or the front-panel key, the specific control methods are as follows:

How to use keyboard hot keys:

Note: 1 second per step, the time is up to 250 seconds.

Note: For the best compatiblity, it is better to turn on keyboard and mouse pass through mode. In this mode, the keyboard and mouse are dynamically mapped to computer, so you are able to use special keyboard and mouse that with multimedia keys or other customized keys.

How to identify whether the KVM is in keyboard and mouse pass through mode?

Turn on the KVM, press [Scroll Lock] + [Scroll Lock] + [F3] , if buzzer beeping twice, the KVM is in keyboard and mouse pass through mode. And beeping once means in keyboard and mouse emulation mode.

HOW TO CHANGE THE HOT KEYS COMBINATION:

There are two kinds of trigger hot keys in this product, the default is [Scroll Lock] key, and the alternative is the [Right-Ctrl] key.if [Scroll Lock] key has been used for other functions, you can switch the hot key to [Right-Ctrl] by:

Method 1:
Press and keep holding the [Set] button on the front panel until you hear the buzzer is beeping, then restart KVM.

Method 2:
Press [Scroll Lock]+[Scroll Lock]+[F1], and you will switch the control hot key to [Right Ctrl].

Vice verse, press [Right Ctri]+[Right Ctri]+[F11, and you will switch the control hot key to [Scroll Lock].

IR Remote Control

Note:

1. For the safety request by some express company, the remote control is not equipped battery by default. Please install the button battery CR2025 before using it.
2. Unspecified buttons at above are non-functional.

RS232 Commands (HEX)

Warranty Information

We warrant this product as free of defects in material and workmanship for a period of one (1) year from the date of shipment.

If during the period of warranty this product proves defective under normal use, we will repair or replace this product, provided that this product has not been subjected to mechanical, electrical, or other abuse or modifications. If it fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for six (6) months from the day of reshipment to the buyer.

Technical Support

Thank you for purchasing the TESmart DP KVM Switch.

We are here to help you!
Do you need assistance setting up your product?
Please make sure you:
– Visit https://support.tesmart.com for knowledge base and troubleshooting or scan the QR code directly with apps like Twitter.

– Consult support@tesmart.com for technical support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>