The Home Depot 55 Electric Standing Desk Instruction Manual
- June 15, 2024
- THE HOME DEPOT
Table of Contents
The Home Depot 55 Electric Standing Desk
Product Usage Instructions
STEP 1: Preparation
- Press the Reset button until the installation progress is complete.
STEP 2: Front Assembly
- Make sure the Front labels are in the same direction.
- Attach part A to part D.
- Attach part B to part D.
STEP 3: G and E Assembly
- Attach part G to part E.
- Attach part S3 to part E.
STEP 4: S4 and S3 Assembly
- Attach part S4 to part S3.
- Attach part S3 to part E.
STEP 5: S6 and S5 Assembly
- Attach part S6 to part S5.
- Attach part S5 to part S3.
- Attach part G to part S3.
STEP 6: H Assembly
- Attach part H to parts S1, S2, S3, S5, and S6.
STEP 7: F and Q Assembly
- Attach part F to part S10.
- Attach part Q to part S10.
STEP 8: J and P Assembly
- Attach part J to part S7.
- Attach part P to part S7.
- Attach parts S1 and S10 to part S7.
STEP 9: N, D, O, and Cable Clip Assembly
- Attach part N to part S7.
- Attach part D to part N.
- Attach part O to part S8.
- Attach the Cable Clip.
STEP 10: Final Assembly
- Attach parts S9, M, L, and K.
FINISH
- After the table is installed, press the key to start.
- The table will automatically drop to the lowest point, indicating a successful installation.
Frequently Asked Questions (FAQ)
-
Q: How many parts are included in the package?
A: There are a total of 39 parts included in the package. -
Q: What is the diameter of the screws?
A: The screws have two different diameters – 6mm and 3mm. -
Q: What are the types of screws included?
A: The package includes M412, M414, M625, M816, and M8*25 screws. -
Q: How do I ensure the table legs are aligned properly?
A: Please make sure the table legs are vertical to the connecting rod and tighten all the screws. -
Q: How do I align the two boards seamlessly?
A: Make sure to align the two boards properly and tighten the screws.
Press the Reset button until it is complete, the installation progress done.
Notes
- Operating voltage: AC100-240V, frequency 50/60HZ
- Operating temperature: -10~40°C.
- Before use, please check whether all power lines are fully connected and firm.
- Before use, please check the surrounding environment and ensure there are no obstructions above or below the table.
- This product is not to be used by children. Adult supervision is required.
- Do not use if any cables (electrical parts) are damaged.
- The product is not suitable for mobile use. If you must move, please prevent it from being injured.
- It is normal for a slight jitter when the table starts to rise and fall. This will not affect the service life.
PARTS LIST
INSTALLATION
