CTA Digital PAD-LTMUH2E Security Clamp Mount Instruction Manual
- June 15, 2024
- CTA Digital
Table of Contents
Security Clamp Mount with Universal
Security Enclosure & Full Cable Management
PAD-LTMUH2E
Instruction Manual
PAD-LTMUH2E Security Clamp Mount
Thank you for choosing CTA Digital’s product. We hope that you will enjoy using it. Please follow the guidelines and instructions as laid out in this instruction manual.
Package Contents:
Instructions:
Setup mounting base as
illustrated. Be sure to have all the wires pulled out before screwing on the
mounting base. 
Attach component and clamp down
on the table as illustrated. Make sure to route the wires onto the exterior
hook feature to neatly route the wires as illustrated.
Attach component and clamp down on
table as illustrated.
Attach grommet component as
illustrated. Make sure to route the wires onto the exterior hook feature to
neatly route the wires.
Attach grommet mounting to
table/surface as illustrated.
Enclosure Installation:
Screw in enclosure to the clamp mount VESA plate using the provided hardware
and tools included. Hold the hex nut from the front with the wrench, and using
the allen key, rotate in screw until securely fastened. 
*HOW TO LOCK CLAMP ARM IN PLACE*
Use allen key as illustrated to lock arm in a static position
HOW TO MAKE ADJUSTMENTS Caution
Please be sure to fasten all the screws securely before using. Failure to do
so may compromise integrity. ATTACHING CABLE MANAGEMENTTRAY & CABLE ROUTING
REMOVING CABLE MANAGEMENT TRAY
Caution
Please be sure to fasten all the screws securely before using. Failure to do
so may compromise integrity.
SETTING UP DEVICE & ENCLOSURE** Lock or unlock your tablet enclosure with
security key as shown.
Find the appropriate size
foam padding (included) for the tablet you wish to use. Make sure device is
compatible for the enclosure. Lay in device and connect any cables/cords as
needed. 
If needed, lay-in correct
included masking insert. Close and lock enclosure afterwards and you’re set