CTA DIGITAL PAD-USBPARAW Dual USB Hub Desk Mount Instruction Manual
- June 9, 2024
- CTA Digital
Table of Contents
CTA DIGITAL PAD-USBPARAW Dual USB Hub Desk Mount Instruction Manual
Contents
Installations
Installing desk mount base platform components
1A. Align plate holes (E) with usb hub (D) and turn in screws (F) with
provided alien tool (I), then put in lid (C). As shown above.
Installing desk mount main body :
2A. Align assembled main kiosk to VESA pole (B) and turn in screws (F) using alien tool(l) until securely tightened. Shown above
3. Mounting enclosure to VESA plate :
3A. Align enclosure holes (A) to VESA plate holes (B) and turn in screws
(G) with provided alien tool (I) while holding the hex nut (H) from behind. As
shown above.
Setting up Device & Enclosure :
“Tablet shown for illustration and NOT INCLUDED.
4A. Lock or unlock your tablet enclosure with security key (K) as shown.
48. Find the appropriate size foam padding (L) for the tablet you wish to
use. Make sure device is compatible for the enclosure. Lay in device and
connect any cables/cords as needed.
Setup enclosure portrait or landscape mode and tilt up and down to desired view.
View Orientions
Setup enclosure portrait or landscape mode and tilt up and down to desired view.
36 Taaffe Place Brooklyn, NY 11205
support@ctadigital.com
888-733-4448
www.ctadigital.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>