altafiber CB-179A Gateway TV Equipment Instruction Manual
- June 14, 2024
- altafiber
Table of Contents
Please take these steps to set up your Gateway
Locate the Fioptics Wiring
Your
Fioptics wiring should already be installed at your residence. The data jack
is typically labeled and may be near the TV, or in the home office. It will
have a blue or orange port. It’s important not to confuse the data jack with a
standard telephone jack.
Alternatively, you can connect directly to your ONT. Your ONT is typically
located in the basement or a garage. If you don’t find it easily, you can look
on the outside of your house and find where the black fiber cable enters your
home. Many times, you’ll find the
ONT on the other side of the wall, or close by. Ensure your ONT is plugged in
and the power indicator is lit.
Connect the Gateway
Once you’ve located the data jack or ONT, you are ready to connect the
equipment. Start by plugging one end of the provided Ethernet cable into the
blue WAN port on your Gateway. Plug the other end into the data jack, or into
port 1 on the ONT. Make sure the ONT is plugged in and powered on.
Power It Up
Now it’s time to power up the equipment. Plug the power adapter into a nearby
wall outlet and connect it to the power port of your Gateway.
We’re here for you.
We are here to help and want you to be completely satisfied with your Fioptics
service. Please scan this code for self-help tips, troubleshooting, support
videos and more.
If you need further assistance, please visit
altafiber.com/support, via SMS at 513.301.2093
or call us at 513.565.9890.
My altafiber
Free online access is available round-theclock, which makes reviewing and
updating your account information fast, secure and easy. Plus, you’ll find a
wealth of support information and online tours to guide you. To sign up, go
online to altafiber.com and click on
My altafiber.
Pay bills • Find your closest store
Ask questions • Receive special offers