HIKMICRO CONDOR Series Thermal Monocular User Guide

HIKMICRO CONDOR Series Thermal Monocular

Introduction

HIKMICRO CONDOR thermal monocular is equipped with an infrared detector and a 1024 × 768 OLED display.
With less than 20 mK NETD, which represents high thermal sensitivity, it ensures image quality and detail recognition even in the hardest weather conditions. Its 1000 m laser rangefinder can accurately measure the distance when you are stalking in the forest or field or observing under low-light conditions. The device can be mainly applied in forest & field hunting, birding, animal searching, adventuring, and recusing scenario.

Package Content

The package includes: Device (× 1), Battery (× 2), Hand Strap (× 1), Battery Charger (× 1), Type-C Cable (× 1), Lint free Cloth (× 1), Protective Bag (× 1), and Quick Start Guide (× 1).

Appearance

The appearance may vary according to different models. Please take the actual product for reference.

1. Eyepiece: The piece placed closest to the eye to view the target.
2. Diopter Adjustment Ring: Adjusts the dioptric setting.
3. & 7.Hand Strap Attachment Point: Mounts the hand strap.
4. Battery Compartment: For holding the battery.
5.  Type-C Interface: To connect the device to power supply or transmit data with a type-C cable.
6. Charging Status Indicator: Flashing Red & Green: Error occurred. | Solid Red: Charging. | Solid Green: Fully charged.
7. Lens Cover: Protects the lens from dust or scratch.
8. Focus Ring: Adjusts focus to obtain clear targets.
9. Buttons: To set functions and parameters.
10. Laser Rangefinder: Measures the distance to the target with laser.
11. Tripod Mount: Mounts the tripod.
    
    Button Description
    

Start/stop recording videos.
Menu Mode: Press to move up
| Menu| Non-Menu Mode: Press: Switch palettes. | Hold: Enter the menu. Menu Mode: Press: Confirm/Set parameters. | Hold: Save and exit menu
| Zoom| Non-Menu Mode:
Press: Switch digital zoom. | Hold: Correct non-uniformity of display (FFC).
Menu Mode: Press to move down.
| Measure + Menu| Press: Capture snapshots.

Install Battery

Steps

1. Rotate the battery compartment cover counterclockwise (1) to loosen it, and pull the battery cover out (2).

2. Insert a battery into the battery compartment as the positive and negative marks indicate.

3. Insert the battery compartment cover (3) and rotate it clockwise (4) until it is tight and locked.
   Note :

   • Remove the battery if the device is not used for a long time.
   • The external rechargeable battery type is 18650, and the battery size should be 19 mm × 70 mm. The rated voltage is 3.6 VDC, and the battery capacity is 3200 mAh.
   • Charge the battery for more than 4 hours before first use.
   • To ensure better conductivity, if the battery compartment cover gets dirty, use a clean cloth to wipe the thread.
     

Charge Device

Steps

1. Lift the type-C interface cover.
2. Connect the device and power adapter with a type C cable to charge the device.
   

Note:

• Please charge the device after the battery is installed in the battery compartment of the device.
• The charging temperature should be from 0 °C to 45 °C (32 °F to 113 °F).

App Connection

• Firmware Upgrade
• Browse and Download
• Remote Control
• Preview
• HIKMICRO Academy
• Online Service
  | |
  ---|---|---

More Operations

Scan the QR code below to obtain the user manual for more operations.

|
---|---

References

• HIKMICRO
• HIKMICRO
• HOME

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>