Baseus 40W PowerCombo Digital PowerStrip User Manual
- June 14, 2024
- Baseus
Table of Contents
Baseus PowerCombo
Digital PowerStrip 3AC+1U+2C 40W
User Manual
Please read this user manual carefully before use and keep it tor future reference.
Product Introduction
This is a power strip with extension cord that comes with 3 AC ports and 3 fast charging DC ports. Built-in digital control circuit, active protection circuit, lightening protection circuit, plus the smart touch control, make the product easy to operate and quick to response with longer service life, safe and reliable. In addition, the DC part uses a new type of semiconductor material (GaN) with a total output power of 40W. The product is mini and compact with a variety of output ports {including 3 AC outlets, 1 USB ports and 2 Type-C port}, and is multiple fast charging protocols certified, including QC4+, PD3.0, QC3.0, QC2.0, PPS, SCP, FCP, AFC, PE+ and more, simultaneously charging two Appte phones.
Schematic Display of Product
- AC Outlet
- Ac Outlet R
- AcOutlet T
- Type 1 Output
- Type-C 2 Output
- USB Output
- Touch switch and indicator light
Indicator Instructions:
-
stays on
Light loading mode: Output about between OW and 650W -
Breathing
Heavy loading mode: Output about between 650W to 1625W, indicator Rashes at 0.5Hz -
Quick flashing
Protection mode: Output over 1625W, automatically tums off, indicator flashes at LHz
Product Specifications
Name: Baseus Digital Control Power Strip
Model No.: CCGAN40-3ACS
Material: PC
Rated voltage: 125v~
Rated power: 1625W Max.
Rated current: 134 Max.
Type-Cl/Type-C2 Output: SV¥—3A; 9V-—2.22A; 12V—1.67A
USB Output: 5V—3A; 9V—24; 12V— 1.54
Type-C1+Type-C2 Output: 20W+20W
Type-C1+USB Output: 20W+18W
Type-C2+USB Output: 15W
Type-C1+{Type-C2+US8) Output: 20W+15W
Type-C 20W: SV—3A; WV—2.22A; 12V=1.67A
USB 18W: 5V¥=3A; 9V=2A; 12V-” 1.54
SW: SVe3A
Power Cord Length: 1.5m (4.92ft)
Product size: 109% 46.5 42mm (4.3% 1.8% 1.65in)
Product weight: About 340g
Package Including
Power Strip X1
User Manual X1
Warranty Card X1
Use Environment
Use ambient temperatures: non-tropical areas, below 2000m altitude.
Storage ambient temperatures: – 20 to 40 degrees Celsius.
Tips
Please read all instructions and warnings before using this product. Non- standard use will damage the product or personal safety.
- The total power must not exceed the rated power of the product.
- Do not wind the power cord during use to avoid overheating.
- Do not store the product in high temperature, strong light and strong magnetic field. Do not place it in other harsh environments such as fire source.
- Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
- Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability.
- Dismantling of this product by non-protessionals is strictly prohibited.
- Avoid actions that could damage the device such as bashing, throwing, stepping on etc.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’ s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Warning
**** Please follow the above safety instructions, otherwise it may cause
fire, electric shock, damage or other injuries.
Supervising Company: Shenzhen Baseus Technology Co., Ltd.
Add: 2th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Hotline: +86-4000-712-711
Website: www.baseus.com
Manufacturer: Dongguan OPAQI Electronic Technology Co., Ltd.
Address: No.2 Of Xifu Road, HongYeBeiLu,
LinCun, Tangxia Town, DongGuan, GuangDong
PB3624Z-POA0
1000051560
Designed by Baseus
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>