ETEKCITY EAP1 Electric Air Pump User Manual

: June 14, 2024
: ETEKCITY

ETEKCITY EAP1 Electric Air Pump User Manual

Thank You

Thank you for purchasing the EAP1 Electric Air Pump by Etekcity. We are dedicated to providing our customers with quality products for building a better living. Should you have any questions or concerns about using your new product, feel free to reach out to our helpful customer support team at 855-686-3835 or by email at support@etekcity.com. We hope you enjoy your new product!

Package Contents

1 x Air pump
1 x Adapter set
1 x User manual

Specifications

Voltage: AC 120V / 60Hz 1
Rated Power: 130W 2
Table of Contents 3
Safety Information 4
Function Diagram 5
Operation 6
Warranty 7
Customer Support 8

SAFETY INFORMATION

IMPORTANT:

Please read and comply with all of the instructions and warnings provided in this manual before using the product. Failure to comply with the instructions and warnings provided herein may result in inaccurate results and/or damage to the product itself.
To reduce the risk of burns, fire, electric shock, or injury:
ONLY use this air pump indoors. – The rated voltage for this air pump is 120V.

DO NOT leave the air pump on for more than 10 minutes at a time; doing so may cause the pump to overheat. – DO NOT attempt to alter the air pump in any way as this will void your warranty. – DO NOT operate or place the pump on or near hot surfaces such as ovens, heaters, or active fires. – DO NOT operate the air pump in wet environments or immerse the pump in any liquid. – DO NOT cover any of the ventilation openings with items such as newspapers, table—cloths, curtains, etc. – DO NOT place hands, fingers, or foreign objects into the inflation or deflation ports at any time. – DO NOT look directly into the inflation port with your eyes while the pump is operating. – Keep this air pump out of reach from children. – Close supervision is necessary when this product is used by or near children, or those with disabilities. – DO NOT use the air pump with solid state speed controls. – Always unplug the air pump when putting on or taking off parts. * Turn off the air pump when it is not being used. – DO NOT attempt to repair or replace the power cord.
+ DO NOT route the cord underneath carpets, rugs, furniture or appliances. Arrange the cord away from
high-traffic areas and where it will not be trippedover.

CAUTION:

To reduce the risk of electric shock damage to the product: DO NOT operate the air pump for more than 10 minutes at a time. + ONLY store this product indoors. + To disconnect the air pump, set the power switch to the OFF” position, then unplug the power cord. This air pump and its adapters are not designed to work with needle valves (i.e. basketballs or footballs) nor stem valves (i.e. presta or schrader valves) found on bicycles. DO NOT attempt to use the air pump with these
air valves.

Note

for the Plug: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fully fit inside the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to alter this safety feature.

SAVE THESE INSTRUCTIONS

Household Use Only

FUNCTION DIAGRAM

Pump
Inflation port Deflation port
Power switch
Power cord
SO
Adapters
hON S

OPERATION

NOTE:

The inflation and deflation ports will it directly onto larger items such as inflatable rafts or air mattresses. Use the appropriate-sized nozzle on smaller inflationvalves. Inflation
1. Attach the inflation port to the item being inflated. If necessary, connect one of the adapters to the inflation port. 2. Plug the power cord into a powered electrical outlet. 3. Press “I” on the power switch to turn on the air pump. Press “0” to tum off the pump. Deflation 1. Attach the deflation port to the item being deflated. If necessary, connect one of the adapters to the deflation port. 2. Plug the power cord into a powered electrical outlet. 3. Press “I” on the power switch to turn on the air pump. Press “0” to tum off the pump.

Maintenance

– When finished using the air pump, turn it off, then unplug it from the electrical outlet. – Allow the air pump to cool for at least 30 minutes before storing. * I necessary, use a damp cloth soaked in mild detergent to remove any tough stains on the air pump.
Dry immediately with a clean cloth. DO NOT immerse the air pump in water or other liquids. – Store the air pump in a cool, dry place.Make sure it is not placed in an area with direct sunlight or chemical
substances. – This air pump does not contain any user serviceable parts.

WARRANTY

TERMS & POLICY

Etekcity Corporation warrants all products to be of the highest quality in material, craftsmanship, and service for 2 years, effective from the date of purchase to the end of the warranty period. Warranty lengths may vary between product categories. If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: . 1. This device may not cause harmful interference, and v ETE KC ITY 2. This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital – – device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable E I ect r I c AI r Pu m p protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no Model No.: EAP1 guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try o correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. + Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.

FCC SDOC SUPPLIER’S DECLARATION OF CONFORMITY

Etekcity Corporation hereby declares that this equipment is in compliance with the FCC Part 15
Subpart B. The declaration of conformity may be consulted in the support section of our website,accessible from www.etekcity.com

CUSTOMER SUPPORT

Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is ours!