Skullcandy S2DBW-P740 Dime In Ear Wireless Earbuds User Guide
- June 14, 2024
- Skullcandy
Table of Contents
Skullcandy S2DBW-P740 Dime In Ear Wireless Earbuds
IDENTIFYING YOUR PRODUCT
Before you get started troubleshooting, let’s make sure you are reading the
correct support page. To identify your True Wireless product, the product name
will be printed either inside the charging case on the underside of the lid OR
on the back body of the charging case.
FIRST TIME SET-UP AND PAIRING
Here are the steps you will want to take to set up your new Dime® earbuds:
Take the earbuds out of the case and remove stickers from charging contact
points. We recommend you put the earbuds back into the case to charge for
about 30 minutes before first use. Be sure the LEDs on the earbuds turn red –
this indicates charging.
Once charged, remove the earbuds from the case to initiate pairing. Both
earbuds will automatically power on and the LEDs will simultaneously flash
blue while they sync to each other.
Once the earbuds have synced together, you’ll hear a voice prompt that says
‘Pairing’. Only the left earbud will begin to flash red/blue. From your
device, turn on Bluetooth and look for ‘Dime®’ in your list of available
Bluetooth Devices.
Select “Dime” and accept any “Pair” or “OK” prompts that appear on your
screen. When pairing is complete a voice prompt will say ‘Connected’. Now that
Dime® is paired, you’re good to go.
PAIRING A NEW DEVICE
If you have already set-up and paired to one device, you can easily pair to
another device by following these simple steps.
Manually Power Off your earbuds with a 4-second button hold.
While Off, press and hold both earbuds again for 4 seconds. this will manually
“Power On”, sync, and then enter your earbuds directly into “Pairing” Mode. At
this time, your LEFT earbud will begin to flash red/blue.
Simply then search and select Dime® in your available Bluetooth Device list to
pair your new device.
USER CONTROLS
- Auto Power On & Power Off: Remove earbuds from Case, and Place them back into the case (charging will begin).
- Manually Power On: 2-second hold
- Manually Power Off: 4 Second hold
- Play/Pause & Answer/End Calls: 1x press on EITHER earbud
- Volume Up: 2x press on your RIGHT earbud
- Volume Down: 2x press on your LEFT earbud
- Track Forward: 1 second hold on your RIGHT earbud
- Track restart/ track back: 1 second hold on your LEFT earbud
- Activate Assistant: 3x press on EITHER bud
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>