Whirlpool TDLR 6240S IT Washing Machine Instructions Manual
- June 14, 2024
- Whirlpool
Table of Contents
Whirlpool TDLR 6240S IT Washing Machine
Introduction
A top-loading, freestanding washer that prioritizes efficiency and convenience is the Whirlpool TDLR 6240S IT. Typically, it has an easy-to-use interface, energy-saving technology, and several wash programs to accommodate various textiles and stains. Because of its small size, it may fit in with every home that needs a useful laundry solution without sacrificing performance or capacity. This model is one of several Whirlpool’s appliances that have been designed and built with durability and customer pleasure in mind.
Required Tools
The required tools for the installation of the Whirlpool TDLR 6240S IT Washing Machine, as depicted in the image, include:
- A 17 mm wrench
- An 8 mm wrench
- A spirit level
- Protective gloves
- Hose fittings (2 pieces)
- A water inlet hose
Accessories
The accessories included in the box for the Whirlpool TDLR 6240S IT Washing Machine, are:
- Two hose fittings
- One water inlet hose
Installation
1a. Removing Transit Bolts : Remove the transit bolts from the back of the washing machine. These bolts are installed to secure the drum and prevent it from moving during transportation. They must be removed before using the machine to avoid damage.
1b. Cautionary Note : The transit bolts should not be left in place when the machine is operated. The illustration with a cross over the bolts signifies that failure to remove these could result in malfunction or damage to the machine.
Connection of Water Inlet Hose
- 2a and 2b: Attach the water inlet hose to the washing machine by screwing it onto the inlet connection.
- 2c: Ensure the hose is not twisted or kinked.
- 2d: Use a wrench to securely fasten the hose to prevent leaks.
- 2e: Turn on the water supply to check for any leakage from the hose.
Leveling the Machine
- 3a: Adjust the feet of the washing machine to make sure it is level. Use a spirit level for accuracy.
- 3b: Lock the feet in place once the machine is level to prevent movement.
Connection of Drain Hose
- Fix the drain hose in place, ensuring it is not kinked or excessively bent.
Power Supply Connection
- Connect the washing machine to the power supply, ensuring the socket is grounded.
Final Setup
- 6A: Check the washing machine for any free movement by shaking it lightly; adjust if necessary.
- 6B: Ensure there is a minimum of 55 cm and a maximum of 100 cm distance from the appliance to the water drain and electrical outlet for safe operation.
Safety Warning
- Avoid contact with the appliance with wet hands to prevent the risk of electric shock.
- Ensure proper handling of the plug and cord during the connection to the power supply.
- Do not pull the cord to disconnect the plug; always grip the plug directly.
- Keep the power plug accessible after installation for safety and practicality.
- Prevent damage to the cord by avoiding stepping on it and ensuring the appliance does not rest on it.
Unlocking and Opening the Washer Lid
The lock icon with the unlocked padlock indicates that the washer’s lid needs to be unlocked. Once unlocked, the lid can be lifted open.
- 1a. Removing Packaging Materials Inside the Drum : Inside the drum, there may be additional packaging materials or shipping braces that need to be removed before the washer can be used.
- 1b and 1c. Removing Any Remaining Transit Bolts or Packaging : Ensure that all transit bolts are removed, as any left in place can cause damage when the machine is operated.
Closing the Washer Lid
After all internal packaging materials have been removed, close the lid of the washer to prepare it for operation.
- 2a and 2b. Checking the Drum : Make a final check inside the drum to ensure that nothing is obstructing the drum and that it can move freely. This is important to prevent any damage or noise when the machine operates.
- These final checks are crucial to ensure the safe and proper function of the washing machine before its first use.
Frequently Asked Questions
What tools do I need to install the Whirlpool TDLR 6240S IT?
You'll need a 17 mm wrench, an 8 mm wrench, a spirit level, protective gloves, two hose fittings, and a water inlet hose for the installation.
How do I prepare my washing machine for installation?
Start by removing the transit bolts from the back of the machine. These are critical for preventing drum movement during transport and must be taken out before use.
How is the water inlet hose connected?
Attach the water inlet hose to the washer's inlet connection and secure it using a wrench. Ensure the hose is not twisted or kinked, and check for leaks by turning on the water supply.
How can I ensure my washing machine is level?
Adjust the machine's feet until a spirit level confirms it is perfectly horizontal. Then lock the feet to prevent any movement.
What is important when connecting the drain hose?
The drain hose should be fixed in place without any kinks or severe bends to ensure proper drainage.
What safety precautions should I take during installation?
Avoid touching the washing machine with wet hands, handle the power plug and cord correctly, do not pull the cord to disconnect the plug, keep the plug accessible, and prevent cord damage.
What should I do before closing the washing machine lid?
Remove any packaging materials or shipping braces inside the drum and make sure there are no obstructions in the drum that could cause damage or noise during operation.
How do I know if I've removed all transit bolts?
Check the back of your machine for any bolts that are still in place. There should be none left if they've all been removed.
What should I do if I find a leak after connecting the water inlet hose?
If there's a leak, turn off the water supply, disconnect the hose, and check the seal. Reconnect the hose and ensure it's tight enough. If the leak persists, you may need to replace the washer or hose.
Can I plug my washing machine into any power outlet?
The machine should be plugged into a grounded outlet that meets the power requirements specified in the manual. Avoid using extension cords or power strips.
What is the correct way to move the washing machine into place?
Gently tilt and push the machine to where you want it. Do not drag the machine, as this could damage the floor or the machine's feet.
Is it necessary to use protective gloves during installation?
Yes, it's recommended to use gloves to protect your hands from sharp edges and to ensure a better grip when handling parts and tools.
Download This PDF Link:Whirlpool TDLR 6240S IT Washing Machine Instructions Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>