GARETT Electronics Smart Activity Smartwatch User Manual
- June 9, 2024
- 1 16
Table of Contents
GARETT Electronics Smart Activity Smartwatch
Thank you for purchasing the GarettSportActivitysmartwatch
SAFETY ISSUES
Before use, read this user annual carefully and keep it for further reference.
The
manufacturer shall bear no liability for any damage/injuries caused by
improper use. Depending on the smartwatch OOtch, certain !’unctions may differ
from the FUNCTION.
- Using this device in the vicinity of medical devices may disrupt their operation Users should pay special attention when using the smart watch in the vicinity of medical devices such as pacemakers, hearing aids and other electronic
- Do r>Ot dispose of the device in fire. There is a risk of battery explosion arxl resultingthreattoli1’eandhealth
- Protectthedevicefrom heat sourcesand direct sunlight
- Do not immerse the device in hot water
- Donotdivewhilewearingthedevice.
- Donotusethedeviceifdamaged
- In case of any damage, take the device to an authorized service centre for inspection/repair. Any attempts to make your ,:;,,,,n repairs may damage the device and result It in the invalidation of the warranty.
- The device should only be cleaned with a soft,slightly damp cloth.
- Nochemicalsordetergentsshould be used forth is purpose
Carett Sport Activity is not a medical de11ice. Smartwatch and the Da Fitapp are not designed for medical diagnosis, treatment or as a preventive measure against illness or disease. You should seek medical advice first before changing your sleep andphysicalactillityhabits
PRODUCT DESCRIPTION
- Touchscreen dis.play
- 0nhff/backhscreenonk>ffbutton
- Setofsensors
- lnter changeablestrap
INSTALLATION
Put the watch on your wrist and adjust the strap length so as to ensure it is not too 0000.
OPERATION
Turning on/off
Press and hold the onk>ff button 121 to turn the device on. When the device is
on, press and hold button (2) to tum it off. The smartwatch is operated using
a touchscreen
Note: Before the first use, make sure that the smartwatch is connected tot he
app The watch will automatically synchronize the time, aoo the physical
activity data will be saved correctly.
CHARGING
- The smartwatch ischarged using the magnetic cable supplied with the de11ice
- Attach the magnetic end so that the contacts oft he watch touch the contacts of the char!,lin!,l cable. Then connect the other end of the cable to the USB port of a computer or a USB power adapter
Note: In c:a,.., the smartwatch does not start – try charging it. Place
the device stably on a flat surface. The magnetic tip must adhere to the
contect&. The first charge should take aboutl-2 hours. In the case of a
discharged watch, charging
can start even after a few minutes the start of charging is signalled by the
wake-up afthe smartwatch screen.
INSTALLING DA FIT APPLICATION
The smartwatch works with your smartphone using the Da Fit a pp. Before
use,you must first dawn load the app from the Google Play Store or the
AppStore aOO install it on your phone. You can search for the a pp by entering
“Da Fit” in the store search engineor by scanning there levant QR code
prOllided below.
PAIRING
Note: Smartwatch Garett Sport Activity does not require a permanent
smartphone connection, but in order to fully enjoy the function of the
watchyou need to pair it with your smartphone using the app. Before the first
use, you need to enter your userdataintheapp
Note: Every ti me you turn on the sm.irtwatch and the app, the data
synchronise automatically (the devices must be paired!) The smartwatch
measures and analyses data on physical activity aOO sleep in standby mode.
Smartwatch Garett Sport Activity is equipped with an accelerometer (G-oonsorJ
that monitors your body movements and processes them based on algorithms that
allow you to determine the details of your sleep and physical activity.
- Turn on Bluetooth on your phone
- Makesurethatthesmartwatchison
- Open the Da Fit app, grant it all permissions and pr011ide the correct data of the
- Select the Add device option at the top of the screen and then select the device namedY20
- When pairing, place the phone a 00 the smartwatch close to each other.
NOTE!: Smartwetch Garett Sport Activity work-. with smartphones that
supp0rt Bluetooth S.7. It isalso compatible with Android 4.4, iOS 8.0 (and
higher].
Before pairing, remember to grant the app the required permissions and
permissions to function property. If you refuse,selected features afthe app
may
not work properly or will be unavailable.
DISPLAY MENU
- Main menu screen (there are fi11e watch faces to choose from, set using the dial/by pressing and holding the screen, as well as several dozen watch faces in the Da Fitapp). You can return to the previous menu by pressing button (2) or swiping right. Swiping left displays the history of your last training session/daily activity summary/information about your last sleep or basic dellice functions. Swiping dawn will take you to the menu containing information about the device, while swiping left/up will take you to the main menu
- Messages: Recent notirications
- Sports: Number of steps taken. distance covered, calories burned
- Sleep: Duration of and data about your last sleep.
- BPM: Heart rate monitor. To take the measurement, touch the button in the centre of the screen. You can stop the measurement in the same wey.
- Exercise: Sport modes. To start recordinr,i an actillity, select it from the list After a completed training session. swipe right aOO click Stop to record the result After completing the activity, the results will be saved aOO displayed at the bottom of the home screen in the Da Fit app.
- Measure HR: Heart rate measurement
- Measure BP: Blood pressure measurement.
- SP02: Blood oxygen saturation measurement
- Weather: Synchronised weather information from your phone
- Shutter: Remote shutter release on your phone camera
- Music: Remote control of the music on your phone
- Breathe: Breathing exercises,
- Flashllght: Flashlight.
- Settings – Setting,r/Tools:
- Stop,Watch: Stopwatch
- Alarm: Turn on/off the alarms set on your phone
- Countdown: Timer.
- Brightness: Brightness settings
- Vibration: Turnon/offvibration
- Theater: Turn on/off theater mode (reduced brightness aOO vibration off)
Heart rate measurement, comments:
To begin heart rate measurement on your watch. go to BPM. Start the
measurement by touching the button in the centre ofthescreen. Before you start
the measurement, make sure that the sensor is touchinQ the skin. The
measurement area should be kept clean; dirt may adversely affect the result.
Take blood pressure aoo o>;ygen saturation measurements in the same way, by
selecting the appropriate options in the menu. Keep your body relaxed and
still during tests Hold the device at the same height as your heart;do not
speak during the test. The measurement shou kJ take at least 1 minute to
obtain an optimal result.
DA FIT APP
Home screen of the app: Displays the most important information about your actillityas well as your health and sleep data from the current day,
- Steps: Activityonthecurrentday. You can display a 7-day summary in the options
- Sleep: Information about your last sleep.Youcandisplaydetailed information in the options
- Heart rate/BP/Blood oxygen: Displaystheresultsofyourheart rate, blood pressure aOO 0>;ygen saturation measurements. You can display detailed information in the options. The Measurement button is used for remote.
- Outdoor running: This function recordsyouractillityaOOroute using the phone’s GPS module
- Activity history: The bottom of the home screen displays the activities recorded using The sport modes on your smartwatch
My device tab
Settings related to the smartwatch.
- Watch faces: Change the watch face.
- Notifications: Select the notifications displayed on your watch.
- Alarms: Turn on/off and configure the alarms activated on thee watch.
- Camera: Information about the remote camera function.
- Others: Additional functions of the watch.
- Update: Smartwatch software update.
My device tab Others In this tab, you can view the settings
related to the smartwatch.
- Find device: Watch search function, it activatesa vibration alarm.
- Time formats: Choose a 24/12 hour time format.
- Unit system: Select the measurement units.
- Do not disturb: Turn on/off watch vibrations for new notifications.
- Reminder to move: Turn on/off inactivity reminders. 24-hour heart rate
- measurement: Turn on/off automatic heart rate measurement.
- Language: Select the language of the smartwatch menu.
- Reset: Restore to factory settings.
- Quick view: Turn on/off the function of unlocking the screen with a hand gesture.
- Weather: Settings for the weather displayed on your watch.
- City: Ability to select a town/city in order to obtain more accurate measurementS.
Drink Water Reminder tab
Settings related to notifications about hydration.
Physiological cycle reminder tab
Settings related to the physiological cycle.
- Physiological cycle reminder: Turn on/off the function.
- Cycle days: Select the number of days in the cycle.
- Menstrual days: Select the number of days of menstruation.
- Last menstrual start date: Start date of your last menstrual period.
- Reminder mode: Set reminders for the day before the menstrual and ovulation period, the day before peak ovulation and the end of the ovulation period
- Reminder time: Select the time of the reminder
- Physiological cycle calendar: With automatic indication of your menstrual period, predicted menstrual period and ovulation.
My tab
Settings related to the smartwatch user.
- Profile: Data of the smartwatch user.
- Goal: Define the daily step goal.
- Health (ios only): Connecting the app to Apple Health.
- Background guide protection (Android only): Instructions incase of a lack of notifications from the app.
- About: Information about the Da Fit app.
TECHNICAL SPECIFICATIONS
- Bluetooth: 5.1 (transmission range up to 10 metres)
- Chipset: GRS515
- Battery: 190 mAh
- 1,69″ IPs display
- Dimensions of the face: 37x 45 x 10 mm
- Waterproof: IP67
- Interchangeable strap
- Dedicated app: Da Fit
- Warranty: 24 months
More information about this device is available at www.garett.pl. Visit www.garett.pl to see more products and accessories.
WARRANTY/RETURNS
The product is covered by a 24-month manufacturer’s warranty. The warranty
does not cover: defects and damage caused by the user or as a result of
improper use (misuse), mechanical damage and damage resulting from using
consumables or accessories other than those provided with the device. When
submitting a claim, fill in the warranty card supplied with the device and
send the device along with proof of purchase to the address ofthe service
centre provided on the warranty card.
Contact details are available on the website:
www.garett.eu
Manufacturer:
GARETT sp. z O.0.
Targowa 18/1413
25-520 Kielce
Correct disposal of the product
(waste electrical and electronic equipment)
www.garett.eu
As indicated by the markingon the product or in the related text, the device
should not be disposed of with other household waste after the end of its
service life. To avoid harm to the environment and human health as a result of
uncontrolled waste disposal, please separate the product from other types of
waste and recycle responsibly in order to promote reuse of material resources
asa regular practice. For information about where and how to recycle this
product in a way that is safe for the environment, household users should
contact the retail outlet in which they purchased the product, or local
authorities. Business users should contact their supplier and check the terms
of the purchase agreement. Do not dispose of the product with other commercial
waste.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>