DIFUY 1248-LM Power Lift Recliner Chair with Heat and Massage Instruction Manual
- June 14, 2024
- DIFUY
Table of Contents
DIFUY 1248-LM Power Lift Recliner Chair with Heat and Massage Instruction
Manual
Please read this manual carefully before any operation and keep it properly for future use.
Customer Service: WefuyService@outlook.com
Exploded View
Components List
Assemble Time
20min
One People
-
Seat A *1
-
Back B *1
-
Backrest C *1
-
Handrail iron frame D *2
-
Handrail iron frame E *2
-
Handrail bag and iron frame cover F *4
It was put under the cushion -
Massager remote control board G *1
-
Massager power supply H *1
-
Motor power supply I *1
-
Foot support frame J *2
-
M6 claw nut K *4
-
screw M6 40mm L 5
-
Armrest pillar M *10
-
Large flat head hexagonal M6 130mm N 10
-
Spanner O *1
-
Glove P *1
-
Power line Q *1
-
Remote control panel R *1
-
Cup holder S *2
-
Handrail round pipe plug
Assembly Instruction
Step 1
Use spanner O and screw N to pin the inner iron frame D and the armrest pillar
M to the outer frame E of the armrest . Tighten all screws , and please pay
attention to distinguishing the front and back of the armrest frame.
Step 2
Align the armrest cover with the assembled iron frame of the armrest , in
the sequence of left to right , and back to front , so that the hole in the
cloth cover aligns with the insert hole . Close the zipper once everything is
properly aligned.
Step 3
Repeat Step 1.
Step 4
Repeat Step 2
Step 5
Please zip up both sides of the arm cushion.
Step 6
Install the armrest cup holder S
Step 7
Turn the screw L through the support frame J and seat cushion frame in
succession,then secure it with the nut K and the screw L.
Step 8
Insert the arms into the seat in a way that they fit properly .
You will hear a click when they are securely engaged.
Step 9
Repeat Step 8
Step 10
Zip up the backpack to the back frame ,then connect the backpack and back
frame with velcro.
Step 11
Plug the back pad into the seat frame , then connect the massager lines: white
with white , red with red , black with the power lines , connect the massage
line with the hand controller.
Step 12
Connect the controller to the motor cable and lock the latch , then connect
the power adapter to the same motor cable and lock the latch , and finally ,
connect the power cord to the power adapter .
Step 13
Stick the velcro from the back frame to the seat frame.
Step 14
Recline the chair.
Step 15
Lift the chair.
ELECTRIC LIFTING & RECLINING
Operation Instructions
- Plug the direct current end of the cord into the AC Adapter outlet, then insert the AC adapter plug into a wall outlet for power.
- Press the button to recline the chair back and footrest.
- Press the button to return the chair back and footrest to their original position. Push the button, a second time to lift the entire chair.
- Press the button to lower the chair and return it to the original position.
MASSAGE CHAIR
READ ALL INSTRUCTIONS BEFORE USING THE ITEM
REMOTE CONTROL Function of remote
Specifications of the Power Adapter
The power is on in the standby state. The user can activate the function via
the hand controller.
Input: AC 100-240V, 50HZ/60HZ;
Output: DC12VIA.
Product features
- Four-way vibration motor
- Five vibration modes.
- Two levels of vibration intensity
- Three preset durations for timed shutdown
- One-way switch for independent heating plate operation
Function details
- Click to cycle through the switch options
- Adjust the vibration intensity switch (strong/weak)
- Click to cycle through the heating switch options
- Tap to switch between the five vibration modes (Pulse/Press/Wave/Auto/Normal)
- Back massage switch
- Lumbar massage switch
- Thigh massage switch
- Leg massage switch
- Cycle through massage times by positioning (10/30/60 min)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>