KUFATEC Skoda Karoq NU7 Complete Set PDC Front Back Instruction Manual
- June 11, 2024
- KUFATEC
Table of Contents
Skoda Karoq NU7 Complete Set PDC Front Back
Product Information
The product is a complete set of PDC (Park Distance Control) for
both front and back of a vehicle. The version of the product is
v1.1 and the manual was last updated on 18.01.2023. The product is
manufactured by Kufatec GmbH & Co. KG and their contact details
are as follows: Dahlienstr. 15 – 23795 Bad Segeberg – e-mail:
info@kufatec.de.
Product Usage Instructions
-
Liability Exclusion: Before using the product, it is
important to read the liability exclusion section provided in the
manual. -
Copyright: The product manual is copyrighted and any
unauthorized reproduction or distribution is prohibited. -
General notes: Refer to the general notes section for
any important information regarding the product usage. -
Safety Instructions: It is important to follow the
safety instructions provided in the manual before using the
product. -
Requirements for the intended use: Ensure that the
product is compatible with your vehicle and meets the requirements
for intended use, as described in the manual. -
How to connect a cable to another: Follow the
instructions provided in section 6 of the manual for connecting
cables to each other. -
Note Cable Inscription/Color: Refer to section 7 of the
manual for cable inscription and color information. -
Assembly Instructions: Follow the instructions provided
in section 8 of the manual for assembly of the product. -
Disassembly rear lights: Refer to section 9 of the
manual for instructions on disassembling the rear lights. -
Disassembly rear bumper: Follow the instructions
provided in section 10 of the manual for disassembling the rear
bumper. -
Assembly rear bumper sensors: Refer to section 11 of the
manual for instructions on assembling the rear bumper sensors. -
Disassembly front covering driver’s side: Follow the
instructions provided in section 12 of the manual for disassembling
the front covering on the driver’s side. -
Cable routing from driver’s footwell to rear bumper:
Refer to section 13 of the manual for cable routing instructions
from the driver’s footwell to the rear bumper. -
Assembly control unit / Connection cable set: Follow the
instructions provided in section 14 of the manual for assembly of
the control unit and connection cable set. -
Assembly warning buzzer back: Refer to section 15 of the
manual for instructions on assembling the warning buzzer for the
back of the vehicle. -
Connection rear bumper: Follow the instructions provided
in section 16 of the manual for connecting the rear bumper. -
Disassembly front bumper: Refer to section 17 of the
manual for instructions on disassembling the front bumper. -
Assembly front bumper sensors: Follow the instructions
provided in section 18 of the manual for assembling the front
bumper sensors. -
Cable routing front bumper: Refer to section 19 of the
manual for cable routing instructions for the front bumper. -
Disassembly / Assembly keypad: Follow the instructions
provided in section 20 of the manual for disassembling and
assembling the keypad. -
Assembly warning buzzer front: Refer to section 21 of
the manual for instructions on assembling the warning buzzer for
the front of the vehicle. -
Connection cable set front: Follow the instructions
provided in section 22 of the manual for connecting the cable set
for the front of the vehicle. -
Coding with Coding Interface: Refer to section 23 of the
manual for instructions on coding with the coding interface. -
Coding Interface: Follow the instructions provided in
section 24 of the manual for using the coding interface. -
Bus rest: Refer to section 25 of the manual for
information on bus rest. -
Connection/Trouble-shooting cable set: Follow the
instructions provided in sections 26 and 27 of the manual for
connecting and troubleshooting the cable set.
Installation Instructions
Complete set PDC front + back
v1.1 (18.01.2023)
Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de
1
Contents
1 Liability Exclusion
3
2 Copyright
4
3 General notes
4
4 Safety Instructions
5
5 Requirements for the intended use
5
6 How to connect a cable to another
6
7 Note Cable Inscription/Color
7
8 Assembly Instructions
8
9 Disassembly rear lights
9
10 Disassembly rear bumper
10
11 Assembly rear bumper sensors
11
12 Disassembly front covering driver’s side
13
13 Cable routing from driver’s footwell to rear bumper
14
14 Assembly control unit / Connection cable set
16
15 Assembly warning buzzer back
18
16 Connection rear bumper
19
17 Disassembly front bumper
20
18 Assembly front bumper sensors
22
19 Cable routing front bumper
24
20 Disassembly / Assembly keypad
26
21 Assembly warning buzzer front
28
22 Connection cable set front
29
23 Coding with Coding Interface
30
24 Coding Interface
30
25 Bus rest
30
26 Connection/Trouble-shooting cable set
31
27 Connection/Trouble-shooting cable set
32
Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de
2
8 Assembly Instructions
The following illustration shows the cable routing as well as the position of
the individual components.
3
6
1,2
5 4
6
6 3
6 1,2
6
4 5
4 4 4
Figure 3: Vehicle overview
· 1 PDC control unit, power supply · 2 Warning buzzer front · 3 Button · 4
PDC-sensors back · 5 Warning buzzer back · 6 PDC-sensors front
Note for assembling the vehicle · Before you start assembling the vehicle, the
system must first be tested for proper
function.
Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de
8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>