LOBINH PA188 Electric Shaver for Men Instructions

PA 188
INSTRUCTION ****

PRODUCT OVERVIEW **

**

BASIC PARAMETERS

Product name: Smart electric shaver
Model: PA188
Rated voltage: 3.7v=
Charging voltage: 5V=
Rated power: 5W
Waterproof level: IPX7
Charging time: 1 hour
Executive standard: GB4706.1-2005/GB4706.9-2008

PRECAUTIONS

Dangers

1. This product and its accessories are not toys, please store them out of the reach of children to avoid any accidents.

2. This product contains a built-in rechargeable battery, please do not throw it into the fire. Please do not charge, use or store it in a high-temperature environment.

3. Do not use it when the USB charging cable or adapter is damaged, or the power socket is loosened.
   

4. The symbol on the right indicates that it is available to clean under an open faucet. 5. Do not modify or repair this product by yourself.

Warnings

1. Please use and store the product at a temperature between 5°C and 35°C.
2. Before charging the product, please make sure that the USB charging cable is connected to a 5V=USB power socket.
3. If the power cord is damaged, please replace it with the appropriate cable from the manufacturer or professional repair shop.
4. To remove the USB charging cable before cleaning the handheld part in water.
5. Do not use salt water, hot water above 60°C, diluent, gasoline, alcohol or other chemicals to clean the razor.
6. This product has passed the IPX7 waterproof test and can be washed with water or under the tap, but not available to soak in water for a long time.
7. Do not excessively press to the lips or other parts of your face. Do not directly touch the wound or wounded skin with the outer knife net.
8. Persons (including children) who are physically unsound, mentally impaired, and lack relevant experience and knowledge should use it under the supervision and guidance of their guardians.
9. Do not knock or drop the product. If the product is damaged due to collision or drop, please stop using it.
10. When you find any abnormality or malfunction of this product, please stop using it immediately, please follow the fault indications. If necessary, please send it to the maintenance department of our company for repair.
11. Do not disassemble the body to replace the battery by yourself.

Usage
The skin may be slightly irritated during the first few times shaving which is normal. We suggested using the razor regularly to allow the skin to adapt as quickly as possible (at least 3 times a week).
Shaving

1. Press one time the switch button to turn on, press it again to turn it off.
2. Let the blades slide on the skin against the growth direction of the beard and make a straight roundabout move.
3. Shaving on a dry face will get a better user experience, so it’s better to shave before washing the face or a period after.
4. Turn off the shaver and put on the protective cover to prevent damages. 5. Please do not shave if the blade’s head is damaged, so as not to damage your skin.

Operating Pop-up Trimmer

1. A pop-up trimmer is used to trim sideburns and long beards.
2. Slide the pushing button to pop out the pop-up trimmer.
3. Turn on the shaver to trim the sideburns and beard.
4. Send back the pushing button to close the pop-up trimmer after use.
5. Every two months, massage a drop of sewing lubricant on the

Travel Lock

1. This electric razor is equipped with a travel locker to prevent accidental activation.
2. Lock the travel locker: when the shaver is off and is not locked’ longly press the ON/OFF button for 3 seconds ****(5 displays on the LCD screen, the shaver is locked.
3. Unlock the travel lock: longly press the ON/OFF button for 3 seconds, ****displays on the LCD screen, the shaved, unlocked.

Charge

1. The applicable voltage of this product is 5 V.
2. Before charging, please make sure that the shaver is turned off.
3. Do not put the shaver in the box while charging.
4. When the battery is about to run out, the shaver should be
5. Be sure to fully charge the product before using it for the first time. It takes about 1 hour to fully charge.
6. Connect one end of the USB charging cable to the adapter, and the other end to the razor. insert the charger adapter into the power socket. The indicating light flashes, the razor is charging. When the indicating light stays stable, the razor is fully charged.
7. In order not to affect the service life of the product, please cut off the power supply in time after it is fully charged. Do not leave the shaver to keep connecting with the power supply after it is fully charged.

Charging Display
After connecting the shaver with the power supply, the “100%” on the LCD screen keeps flashing, the razor is charging. When the “100%” stays stable, the razor is fully charged.
Operating Display
When turn on the shaver, the “100%” on the LCD screen keep lighting, the razor is able to use. If the “100%” on the LCD screen keeps flashing, you can use the supplied USB cable to charge it.
Note: When the remaining battery of the shaver is too low to power on, it can be used directly by connecting with a USB power supply. If it is not in use for a long time, please recharge it each six months at least. It can work for about 75 minutes in a full charge. Suggestion: Replace the blades head every 12 months to ensure the ideal shaving effect; when it is worn or damaged, please replace it with the special blades head of our company. Maintenance: massage a drop of sewing lubricant on the blade of the trimmer after cleaning.

**

**Cleaning and Maintenance

1. The shaver must be turned off before cleaning.

2. Cleaning the razor regularly can ensure better shaving effects.

3. Cleaning of parts: Clean the blades head once a month. Use the brush that came in the package to clean the razor from its top. Press the release button, remove the shaving head. Clean the hair cabin and re-install the razor head on the shaver.

4. Cleaning the blades net: Press the release button, remove the shaving head. Rotate counterclockwise to remove the holder.
   Remove the knife net from the headcover in order (do not exchange the blade and the knife net with each other, it will affect the using effect). Clean the blade and knife net with the supplied brush. Re-install the knife net back into the head cover, and then reinstall the holder on the shaver head.

5. Replacement of shaving head Removes: Press the released button, pull up the shaving head, and take it off.

Install: Align the razor head with the interface of the shaving cabin and gently press it down to install it back on the razor.

Remove the Battery
Tips: The battery in this machine is an ICR14500 3.7V rechargeable lithium battery. Cut off the power supply when removing the battery, use the shaver until its power is exhausted.
*Please make sure the battery power has run out before taking out.

1. Use a flat-blade screwdriver to pry off the release plank of the trimmer, take off the screw cap.
2. Use a Phillips screwdriver to take off the screw-on shell and remove the rear shell.
3. Use a Phillips screwdriver to take off the screw-on waterproof shell and remove the waterproof shell.
4. Use a screwdriver to take off the screw on the circuit board and remove the circuit board.
5. Cut off the contact piece on the battery, take off the battery.
   Note: Do not short-circuit the battery contact piece.

FAULT RESOLUTION

blade net
The beard clogs the razor| Clean the shaver -roughly
The battery is low or exhausted| Connect the charger -ing cable to charge
Doesn’t work while power on| Switch failure| Back to after-sales maintenance
The battery is exhausted| Connect the charge -ing cable to charge
Circuit failure| Back to after-sales maintenance
Skin allergies after shaving| It takes time for the skin to adjust to the razor| Do not press hard when using
After the skin acclimatization period of 2 to 3 weeks, the skin allergies disappear
Chargingdication in doesn’t light| Not connected to power| Connect the charge -ing cable to charge
Damaged indicator| Back to after-sales maintenance

Environmental Protection

The built-in rechargeable battery may contain substances that pollute the environment. Before discarding the shaver be sure to remove the battery, or send the shaver to an officially designated recycling station for disposal. You can also send the used razor to the recycling department designated by our company, the maintenance department will disassemble and recycle the battery. Please do not shave if the blade’s head is damaged, so as not to damage your skin.
warn: Do not short-circuit the battery to avoid any possibility of burning and fire.
Do not throw the battery into the [fire to prevent explosion or any release of toxic substances.
WARRANTY CARD

We provide the following guarantee for this product

1.  This product passed through strict quality management and inspection process.
2. Products that break down (Non-human cause) during the warranty period can be replaced free. (Batteries and blades heads are consumables, which are not covered by warranty.)
3. The free replacement cannot be provided in the following situations:
   A. Damage caused by maintenance and remodeling that not permitted by our company;
   B. Damage caused by abuse or accidents;
   C. Damage caused by natural disasters and voltage;
   D.Damage caused by not observing the precautions in this user manual. 4. Take this warranty card as the warranty certificate.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>