DIFUY 1248-GSM Swivel Rocker Recliner Chair with Heat and Massage Instruction Manual

Table of Contents

Please read this manual carefully before any operation and keep it properly for future use.

Step 1 Use spanner K and screw J to pin the inner iron frame D and the armrest pillar I to the outer frame E of the armrest . Tighten all screws , and please pay attention to distinguishing the front and back of the armrest frame.
Step 2 Align the armrest cover with the assembled iron frame of the armrest , in the sequence of left to right , and back to front , so that the hole in the cloth cover aligns with the insert hole . Close the zipper once everything is properly aligned.
Step 3 Repeat Step 1.
Step 4 Repeat Step 2.
Step 5 Please zip up both sides of the arm cushion.
Step 6 Install the armrest cup holder M.
Step 7 Insert the arms into the seat in a way that they fit properly. You will hear a click when they are securely engaged.
Step 8 Repeat Step 7.
Step 9 Zip up the backpack to the back frame, then connect the backpack and back frame with velcro.
Step 10 Plug the back pad into the seat frame, then connect the massage lines: white with white, red with red, and black with the power lines, connect the massage line with the hand controller.
Step 11 Recline the chair.
Step 12 Lift the chair.

DIFUY-1248-GSM-Swivel-Rocker-Recliner-Chair-with-Heat-and-Massage-
FIG-16

The power is on in the standby state . The user can activate the function via the hand controller.

Product Features

Function details

Click to cycle through the switch options
Adjust the vibration intensity switch ( strong/weak )
Click to cycle through the heating switch options
Tap to switch between the five vibration modes ( Pulse / Press/ Wave / Auto / Normal)
Back massage switch
Lumbar massage switch
Thigh massage switch
Leg massage switch
Cycle through massage times by positioning ( 10 /30 / 60 min )

Q: How do I operate the remote control?
A: The remote control has various functions:
- POWER: Turn on/off the remote control
- HEAT: Turn on/off the heat function for the lumbar part only
- INTENSITY: Control massage function from low to high
- MODE: Choose one massage mode you like (pulse, press, wave, auto, normal) You can choose 1-4 massage parts (back, lumbar, thighs, legs)to enjoy.
- TIMER: Set the duration for 15 mins/30 mins/60 mins
Q: What are the specifications of the Power Adapter?
- A: The Power Adapter has the following specifications:
- Input: AC 100-240V, 50HZ / 60HZ
- Output: DC12VIA
Q: What are the product features?
A:
- Four-way vibration motor
- Five vibration modes
- Two levels of vibration intensity
- Three preset durations for timed shutdown
- One-way switch for independent heating plate operation
Q: How do I use the different functions?
A:
- Click to cycle through the switch options
- Adjust the vibration intensity switch (strong/weak)
- Click to cycle through the heating switch options
- Tap to switch between the five vibration modes(Pulse/Press/Wave/Auto/Normal)