DT Research 373T-MD Rugged Tablet User Guide

DT Research 373T-MD Rugged Tablet

Product Information

Specifications:

• Product: Rugged Tablet
• Manufacturer: DT Research, Inc.
• Model: 373T/MD

Package Contents:

• A USB 3.0 Port
• B Headphone-out
• C Ethernet Port
• D USB Type-C Port
• E DC-in

Button Functions:

Precautions:

• Ensure that the battery pack is fully charged before initial setup.
• If the battery pack is drained substantially, try unplugging and replugging the AC-DC adapter a few times to activate the charging process.
• Avoid using the Power Button to turn off the tablet, as it is intended for recovery from lockups.

Basic Features:

Powering ON and OFF
To activate the 373T/MD, push and quickly release the Power Button. The display will come on in a few seconds. To put the 373T/MD in Standby mode, push and quickly release the Power Button. To turn the 373T/MD off for extended storage, power off safely using any software function that shuts down the computer provided in the software operating system.

Start Up
If the power-up is successful, the appropriate interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established.

Configuring the Tablet
The 373T/MD may be configured using the utilities and methods dictated by the software operating system. It should be configurable for various properties such as user profiles, network features, and system elements.

• Wireless Networking
  • Wireless LAN
  • Bluetooth

Using the Tablet:

Peripherals Support
Through its USB port, the 373T/MD supports a wide range of USB-based peripherals. These peripherals are applicable for software installation, applications storage, data storage, and system software recovery and updates.

For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research website.

Compatible with Rugged Carts
The 373T/MD rugged tablet is designed to be installed on a cart only, not for mobile applications. The VESA bracket provides the convenience to mount 373T/MD on a cart with screws. The purpose of installing 373T/MT on a cart only is to provide extra mobility together with peripheral I/O devices while still keeping the advantage of powerful, large tablets to optimize and streamline the healthcare process for enhanced workflow and efficiency.

FAQ:

• Q: Can I use the tablet for mobile applications?
  A: No, the 373T/MD rugged tablet is designed to be installed on a cart and is not intended for mobile applications.

• Q: Where can I download the Tablet Modules Basic Operation Guides?
  A: You can download the guides from the DT Research website.

INTRODUCTION

Thank you for acquiring the 373T/MD, part of DT Research’s line of Rugged tablets. Featuring a slim, robust enclosure, the 373T/MD with a 17” TFT display is powered by the Intel® processor, offering optimal combinations of performance and power savings.

The 373T/MD is available with Microsoft® Windows® or Ubuntu operating system. Each software operating system features web browser, client/ server computing software, media player, accessories, and applications support.

PACKAGE CONTENTS

• One 373T/MD with Battery Pack, Handstrap, and VESA Bracket
• AC-DC Power Adapter with Power Cord
• Basic Operation Guide

Input/Output Ports And Button Functions

Input/Output Ports

• A. USB 3.0 Port
• B. Headphone-out
• C. Ethernet Port
• D. USB Type-C Port
• E. DC-in

Button Functions

Power/Battery LED Status:

• Blue indicates the battery is 25% to 100% charged
• Blinking blue indicates the battery is charging
• Orange indicates that the battery is between 11% to 25%
• Blinking Orange indicates that the battery is below 10%

PRECAUTIONS

• Always exercise care when operating and handling the 373T/MD.
• Do NOT apply excessive pressure to the display screen.
• We recommend using the Digital Pen (optional) to keep the screen clean.
• Avoid prolonged exposure of the display panel to any strong heat source. Wherever possible, the 373T/MD should face away from direct light to reduce glare.
• If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any AC-DC adapter other than the one provided or acquired from the manufac- turer or its partners.
• In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the 373T/MD and disconnect all power sources. Report the problem to your device provider immediately.
• Never attempt to disassemble the 373T/MD, as this will void the warranty.

BASIC FEATURES

The 373T/MD wireless tablet integrates a bright and multi-touch display, one USB port, and embedded networking elements such as wireless LAN and Bluetooth. The 373T/MD is complemented by a suite of accessories, including battery expansion, charging cradles, and battery charger kit, for a comprehensive user experience.

A 373T/MD typically integrates an 802.11ax wireless LAN (WLAN) adapter that may connect to other wireless devices or access points. If your 373T/MD does not come with such a network adapter, please consult your device provider to establish the desired network connectivity.

OPERATION

Powering ON and OFF
To activate the 373T/MD, push and quickly release the Power Button. The display will come on in a few seconds. To put the 373T/MD in Standby mode, push and quickly release the Power Button. To turn the 373T/MD off for extended storage, power off safely using any software function that “shuts down the computer” provided in the software operating system.

NOTE:

• The battery packs shipped with your tablet may be low in power—please use the AC-DC adapter with the 373T/MD when setting up for the first time to fully charge the internal battery pack. You may charge the external battery pack with it attached to the 373T/MD, or with the optional external battery charger kit.
• When the battery pack is charging, the blue-colored Battery LED should blink slowly. If plugging in the AC-DC adapter does not trigger this blinking activity and the LED stays dark, the battery pack may have been drained substantially. Try unplugging/replugging the AC-DC adapter to the 373T/MD a few times to activate the charging process.
• To conserve power, use (push and quick release) the Power Button to put the tablet in “Standby” mode while not in use. Pushing briefly on the same button will wake up the system within seconds.
• Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the tablet—this form of hardware shutdown is intended to be a means of recovery from lockups, and not as normal operation.

Start-Up
If the power-up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established.

Configuring the Tablet
The 373T/MD may be configured using the utilities and methods dictated by the software operating system. The 373T/MD should be configurable for various properties such as user profiles, network features, and several system elements.

Wireless Networking

Wireless LAN
The 373T/MD is often delivered with an embedded (user-inaccessible) 802.11ax WLAN adapter equipped with a hidden custom antenna.

• Through the support of typical WLAN adapters, the 373T/MD should be able to detect all 802.11 access points in the vicinity for you to select the access point of your choice for connection.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the 373T/MD and the access points have to match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking equipment literature to properly configure associated settings such as Authentication mode, etc.
• Refer to the access point operating manuals for setting up the 802.11 access points.

Bluetooth
The 373T/MD offers the Bluetooth module which supports Bluetooth 5.2 standard including Bluetooth 3.0 High Speed and Bluetooth 4.0 Low Energy, which delivers faster speeds with low power consumption.

USING THE TABLET

Peripherals Support
Through its USB port, the 373T/MD supports a wide range of USB-based peripherals. These peripherals are applicable for software installation, applications storage, data storage, and system software recovery and updates.

For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research website.

Compatible with Rugged Carts
The 373T/MD rugged tablet is designed to be installed on a cart only, not for mobile applications. The VESA bracket provides the convenience to mount 373T/MD on the cart with screws. The purpose of installing 373T/MT on a cart only is to provide extra mobility together with peripheral I/O devices while still keeping the advantage of powerful, large tablets to optimize and streamline the healthcare process for enhanced workflow and efficiency.

RF Exposure Information

RF Exposure Information (RED & UKCA)

• To be protected against all verified adverse effects, the separation distance of at least 0mm must be maintained between the antenna of the radio having max. 6.0 dBi antenna and all persons.
• Hereby, [DT Research, Inc.] declares that the radio equipment type [373T/MD] is in compliance with Directive 2014/53/EU and UK Radio Equipment Regulations 2017. The full text of the EU and UK declaration of conformity is available at the following internet address: http://www.dtresearch.com.
• The functions of Wireless Access Systems including Radio Local Area Networks (WAS/RLANs) within the band 5150-5350 MHz for this device are restricted to indoor use only within all European Union countries (BE/BG/CZ/DK/DE/EE/IE/EL/ES/FR/HR/ IT/CY/LV/LT/LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/FI/SE/TR/N O/CH/IS/LI/UK(NI). Maximum EIRP for EU

• This equipment complies with Directive 2014/53/EU and UK Radio Equipment Regulations 2017 radiation exposure limits set forth for an uncontrolled environment. The end user must follow the specific operating instructions to satisfy RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• The portable device is designed to meet the requirements for exposure to radio waves established by the European Union market(France). These requirements set a SAR limit of 2W/kg averaged over one gram of tissue. The highest SAR value 0.38 W/kg reported under this standard during product certification for use when properly worn on the body.
• The equipment has been tested with radios set to their highest transmission levels with the following setup:
  Mode| use against the head| worn or carried against the torso of the body| Worn on limbs
  ---|---|---|---
  Separation| /| 0 mm| /
  SAR Value| /| 0.38 W/kg| /
  Sar Limit| 2W/kg (over 10 g)| 2W/kg (over 10 g)| 4W/kg (over 10 g)
• Body-worn accessories (e.g., carry case, belt clip) containing metallic components that have not been tested or certified may change the RF performance of the device, including its compliance with RF exposure. Users shall avoid using such accessories and should operate at least the above-stated separation distance to maintain RF exposure compliance.

Operating authorizations must exist to operate the product in the following member states of the European Union, refer to the table below.

• Importer Name: Concept International GmbH
• Importer Address: Zweibrückenstr. 5-7 80331 München Germany.

Federal Communication Commission Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The end user must follow the specific operating instructions to satisfy RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The portable device is designed to meet the requirements for exposure to radio waves established by the FCC. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body, with 0mm separation.

THE FCC ID Label is in a removable battery compartment, it could be easily found by removing the battery cover.

Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information

Unique Identifier Trade Name:

• Model No.: 373T/MD

Responsible Party – U.S. Contact Information DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com.

IC Compliance Statement

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

This Class [B] digital apparatus complies with Canadian ICES-003.

RF Exposure Compliance
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. The end user must follow the specific operating instructions to satisfy RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body, with 0mm separation. The functions of Wireless Access Systems including Radio Local Area Networks(WAS/RLANs) within the band 5150-5250 MHz for this device are restricted to indoor use only.

DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2023, DT Research, Inc. All Rights Reserved. www.dtresearch.com.

References

• DT Research | Rugged Tablets, Medical-Cart Computers and AIO Computers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>