Tenda 4G185 4G LTE Mobile Wifi Installation Guide
- June 14, 2024
- Tenda
Table of Contents
**Tenda 4G185 4G LTE Mobile Wifi Installation Guide
**
Package content
- Mobile Wi-Fi 1
- Li-ion battery x 1
- USB cable x1
- SIM Card Adapter x 1
- Quick installation guide × 1
For product or function details, please go to www.tendacn.com to download the user guide.
LED indicators/LCD Screen
4G180
LED
| Status|
Description
---|---|---
all
Signal
| Solid green| Connected to the Internet.
Blinking green| Signal detected, but no Internet access.
Solid red| No signal.
Battery
| Solid green| Remaining battery percentage is above 25%.
Blinking green| Charging the battery.
Solid red| Remaining battery percentage is between 20% and 25%.
Blinking red| Remaining battery percentage is below 20%.
Message
| Blinking green for 5 times| New SMS message is received or the storage is
full.
Solid green| There are unread SMS messages.
Off| No unread SMS messages.
(0. 3
| Solid on| No device is connected to the Wi-Fi network.
Blinking| There is at least one devices connected
to the WkFi network, or a WPS negotiation is in process.
Off| The Wi-Fi network is disabled.
4G185
- Data type and signal strength
- Battery meter
- Wi-Fi status and connected Wi-Fi clients
- Operator name
- Message status
- Operator name/Tip information
- Internet connection duration
- Used data traffic
Buttons/Ports/Slots
No.
| Buttons /Port/Slot|
Description
---|---|---
1| | Power button.
· Hdd it for about 3 seconds to tum on/off the Hotspot.
· Press it once to turn on its LED indcators/LCD screen.
(- Tips:
When the LCD screen of 40185 is at Press it once to
show the SSID and WeFi key. Press it twice to Mon a OR code of the 56/1-Fi nfonnattn.
2| WPS| WPS button.
When the WPS function is enabled:
· 40180: The Wi-Fi LED indicator will blink.
· 40185: WPS Active will be shown on the LCD screen.
Hold the button down for about 3 seconds to enable the WPS function. Enable the WPS function on a WPS-supported device to establish a WPS negotiation.
3| Reset| Reset button.
Hold the button using a sharp object for about 6 seconds to reset the Hotspot.
4| SD card skit| Insert your SD cad here to increase storage space.
5| SIM card slot| Insert your SIM card here.
6| Charging/ Micro USB port| Used to charge the Hotspot, or to provide wired
device internet access using the USB cable.
Install SIM card and battery
-
Open from the lower left corner
-
Slide and flip to open
-
Metal connectors
Turn on the Hotspot
- Hold the button till all LED indicators flash once (4G180) or the LCD screen lights up (4G185
- When the Hotspot is connected to the internet, you will find:
4G180
4G185
Tips
If the Hotspot is not connected to the internet after a long time, refer to Q1
in FAQ.
Access the internet
- To access the internet through the Hotspot:
- Wireless: Connect your wireless device to the Wi-Fi network of the Hotspot with the SSID and Wi-Fi key at the top of the device after opening the back cover.
- Wired: Connect a PC or laptop to the Hotspot using the USB cable
Charge your Hotspot
Method 1: Connect to a computer
Method 2 : Connect to a power socket
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>