Oliveri NA3771G Counter Top Circular Basin Instructions
- June 14, 2024
- Oliveri
Table of Contents
Oliveri NA3771G Counter Top Circular Basin
CARE & MAINTENANCE
Avoid using abrasive or acid based cleaning products.
WARRANTY FOR DOMESTIC USE
This basin is warranted to be free from manufacturing defects for a period of:
20 years replacement parts and 1 year labour.
Subject to the terms contained in the full warranty information available at
https://oliveri.com.au/service-and-warranty, where a genuine manufacturing
defect arises within the warranty period Oliveri will, at its election, repair
the defect or replace the product.
This warranty does not cover against normal wear and will be voided if the
product is misused or not installed in accordance with these instructions.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be acceptable quality and the failure does not amount to a major failure.
SERVICE
If the basin requires servicing, please contact your installer (preferably the
one who installed it). If the installer is satisfied that the problem is not
due to poor installation, contact Oliveri’s nominated Warranty Service Agent
for assistance on:
Ph: (08) 8348 6444 (choose the after sales service and warranty option)
Email: warranty@oliveri.com.au
For full warranty information visit: https://oliveri.com.au/service-and-
warranty
If a warranty service call finds that the product does not have a genuine
manufacturing fault, our Warranty Service Agent reserves the right to pass on
any call-out fee to the householder.
THIS BASIN MUST BE INSTALLED BY A LICENSED PLUMBER IN ACCORDANCE WITH LOCAL REGULATIONS
Remove all products from packaging:
Check the product for damage, if the product is damaged return to store of
purchase.
Check the product is complete with all components required to install.
This product is to only be installed by a licensed plumber, failing to do so
will void warranty.
This product is to be installed as per Australian Standard and local authority
requirements.
Basin Installation:
- Determine where on the bench top the basin is to be installed.
- Place the basin in position and check to ensure the basin waste outlet position does not interfere with draws, internal walls or waste connection pipe work.
- Mark the waste hole position on the bench top, using a suitable cutting devise based on bench top material cut a hole in the bench top large enough to accommodate the waste being used.
- Fit waste to basin as per waste installation instruction document.
- Run a bead of plumbers grade silicone around the underside edge of the basin.
- Fit basin to bench top, allow silicone to set before proceeding with waste pipe installation.
Dimension
All dimensions in mm
Customer Support
Oliveri Solutions Pty Ltd ABN 12 007 551 886 51 Naweena Rd, Regency Park SA
5010
P 08 8348 6444
E sales@oliveri.com.au