Oliveri MA859FF6CG Madrid Classic Gold Soap Holder Instructions
- June 13, 2024
- Oliveri
Table of Contents
Oliveri MA859FF6CG Madrid Classic Gold Soap Holder
Product Information
Product Name: Madrid MA859FF6CG Classic Gold
Soap Holder
Specifications
- Materials: Zinc alloy/brass / stainless steel
- Finish: Classic gold (PVD)
- Mounting method: Wall mounting, four-point fixing
- Parts list Soap holder, fixing set
- Warranty 7 years parts, 5 years finish, 1 year labour (refer to oliveri.com.au)
- Maintenance and care instructions
All surfaces should be cleaned with mild liquid detergent or soap and water. Do not use cream cleaners or citrus-based cleaning products, as they are abrasive. Use of unsuitable cleaning agents may damage the surface. Any damage caused in this way will not be covered by warranty
DIMENSION
Parts Included
- Soap holder
- Fixing set
Warranty
- 7 years for parts
- 5 years to finish
- 1 year for labor
Maintenance and Care Instructions
All surfaces should be cleaned with mild liquid detergent or soap and water. Do not use cream cleaners or citrus-based cleaning products, as they are abrasive. The use of unsuitable cleaning agents may damage the surface. Any damage caused in this way will not be covered by the warranty.
Product Usage Instructions
- Select a suitable location on the wall for mounting the soap holder.
- Ensure that the mounting surface is clean and dry.
- Take the soap holder and align it with the desired position on the wall.
- Using the provided fixing set, mark the positions for drilling holes in the wall.
- Drill holes at the marked positions using an appropriate drill bit.
- Insert the provided wall anchors into the drilled holes.
- Align the soap holder with the wall anchors and secure it using the provided screws.
- Double-check the stability and alignment of the soap holder.
- Once properly installed, the soap holder is ready for use.
If you require further assistance or have any questions, please contact us at 08 8348 6444 or visit our website at oliveri.com.au.® Registered trademark of Oliveri Solutions. Under its policy of ongoing product development Oliveri Solutions may from time to time change product specifications without notice. All dimensions given are approximate and should be checked prior to installation. See oliveri.com.au for installation and warranty details.