HOTATA SL102 Keyless Entry Door Lock User Guide

HOTATA SL102 Keyless Entry Door Lock

HOW TO REGISTER

• Download the TTLOCK app from
• Google Play or App Store.
• Search” TTLOCK “

Note:
The lock app is needed to use this lock. If this lock was professionally installed (or installed by someone other than the homeowner), make sure this step is performed by the homeowner.

PAIRING YOUR LOCK

LOCK PAGE OVERVIEW

• Unlock/Lock
  Unlock/Lock using the phone’s Bluetooth

• Generate Passcode Page
  Generate 6 different types of passcodes

• eKey Page
  View and modify current eKeys

• Remote Unlock (Need Gateway)
  Unlock remotely if Sifely Gateway is connected nearby

• Records Page
  View entry times, attempts, and methods

• Settings Page
  View and modify settings

• Cards/Fobs Page
  Set up your fobs here

• Fingerprints Page
  Set up fingerprints

• Authorized Admin Page
  Create and edit admins

Note:
Some of these icons may not appear if the Gateway is not connected to the lock.

APP UNLOCK/LOCK

• To unlock the lock, tap this icon once.
• To lock the lock, press and hold on this icon.

Note:
This will only work while you are within Bluetooth range of the lock. Refer to the Gateway Guide page for remote unlock/lock information.

PASSCODES

Best Practice:
When inputting the passcode use # + Code + #.

Within this page, you can

• Edit a passcode’s number, validity, and name.
• Delete code and view records.

Pay attention to this text when generating a code. You may experience issues if these instructions are not followed.

Note:
To generate custom codes, you will need to be within Bluetooth range of the lock unless a Gateway is connected.

Note:
The above can only be done within Bluetooth range unless a Gateway is connected.

IC CARD/FOBS

1. STEP 1
   Tap on “Cards”

2. STEP 2
   Tap on “Add Card”

3. STEP 3

   • To add a fob to your lock.
   • Follow these steps.

4. Choose the validity period of the lock.

5. Once the lock says”Please swipe your card” place the fob against the keypad.

6. If you hear “input successful”, the fob can be used to unlock your lock.

FINGERPRINTS TO ADD A FINGERPRINT FOLLOW THIS INSTRUCTION

Experiencing issues with fingerprint recognition?

• Ensure the sensor surface is clean.
• Try a different finger.
• Ensure your finger is moist enough.
• Take out batteries for a minute and place them back in.

eKEYS

Best Practices:
It is strongly recommended that the recipient first register for an account using the Smart Lock app.

STEP 1

• eKeys works by sharing app access of your lock with another Smart Lock account.
• eKey recipients will be able to use their phone to unlock/lock the lock.

STEP 2

• Enter the recipient’s username. It will be the phone number or email address used during registration.
• eKeys do not require wifi or Bluetooth to be sent or revoked.

AUTHORIZED ADMIN

STEP 1
Authorized Admins are similar to eKeys; however, an authorized admin can do the following:

1. Unlock/lock via the app.
2. Generate, Edit, and Delete passcode cards,& fingerprints.
3. Adjust settings like passage mode,auto-lock timer,& turn on/off the lock sound.

STEP 2
Enter the recipient’s username. It will be the phone number or email address used during registration.

PASSAGE MODE & AUTO-LOCK

STEP 1
Auto-lock will automatically lock the lock when it has been opened after 5 seconds by default. This can be adjusted with Passage Mode and Auto-lock timer. Outlined below is how to adjust these settings related to auto-lock.

STEP 2
Select Passage Mode

STEP 3
Passage Mode disables auto-lock during a set schedule.

LOCK SETTINGS

• Here are some settings you should familiarize yourself with.
• Under Basics, you can view and change information such as Lock Name.
• Gateway shows signal strength if Gateway is connected.
• With Remote Unlock on and a Gateway connected, you can remotely unlock/lock your lock.
• Lock Sound adjusts the lock’s sound level.
• Import from another lock allows for the transfer of passcodes and fobs from one lock to another.
• Delete will remove the lock from your account and clear any settings on the lock.
• You must be near the lock to do this.

EDIT ADMIN PASSCODE

Note:
Edit admin postcode only works while you are within Bluetooth range of the lock if no lock gateway connects.

GATEWAY Sold Separately

The Gateway bridges any nearby locks to your local wifi allowing for remote control.

With the Gateway connected.

• Receive unlock notifications wherever you are.
• Remote unlock/lock.
• Check access logs whenever you need them.
• Generate, edit, or delete custom codes for your guests.
• Access the features of the web portal version of our app for free!
• Check battery level remotely

FAQs

• Q: I entered a code or fingerprint incorrectly too many times and my lock will not accept any new inputs.
  A: Unlock the lock once via the app or wait 5 minutes.

• Q: How can I manually lock the lock?
  A: Press and hold # to lock the lock.

• Q: The batteries died before I could replace them. What can I do?
  A: Use the provided physical keys to open or plug in a power bank in the emergency power supply slot at the bottom of the lock to be able to enter and change the batteries

• Q: How do I share access to the lock on 2 different phones?
  A: Refer to eKeys or Authorized Admin section on how to do that.

Not working as it should? Contact us with the following information for quicker resolution.

• Which product you do have?
• Where are you in the setup process?
  • Installing the product.
  • Setting up the app and pairing the product.
  • Already set up the app with the product.
• How long have you had our products for?

Here is how you can contact us:

• Email: [email protected].
• Live chat: the seller’s website.

References

• HOTATA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>