HOTATA 3109 Smart Lock for Front Door User Manual
- June 14, 2024
- HOTATA
Table of Contents
HOTATA 3109 Smart Lock for Front Door
Product Information
Specifications
- Model No: 3109
- Version: 1.0
- Customer Service: 1 Year Warranty, Lifetime Customer Support
- Quality Assurance: Support Return and Exchange
- Email: aftersale@hotata.com
- Video Tutorials: https://www.youtube.com/@hotataaftersale/playlists
IMPORTANT: Read the instructions carefully before operating the appliance and keep them for future reference.
Components List
Tools Required
- Tools Required for Installation on Pre-drilled Doors:
- Phillips Screwdriver (DO NOT USE POWER DRILL!)
Installation Guide
Prepare the door and check dimensions
If drilling a new door, use the supplied template and the complete door drilling instructions.
Optional: For the best fix, you may need to drill an additional hole for the reinforcement screw.
- Measure to confirm that the hole in the door is 2-1/8″（54mm)
- Measure to confirm that the backset is either 2-3/8″or 2-3/4″(60 or 70mm)
- Measure to confirm that the hole in the door edge is 1″(25mm)
- Measure to confirm the thickness of the door is between 1-3/8″and 2″(35 and 50mm)
Install the latch and strike
- Insert the latch bolt into the door.
- Install strike on the door frame.
Install the exterior assembly
- Route the cable through the door below the bolt and push the keypad onto the door.
- The key must be pulled out when installing.
Install the interior assembly
- Please confirm the door opening direction before installing.
- Find the direction switch under the Interior Assembly, and change the direction as per the instructions below:
- Route cable through the bottom of mounting plate.
- Tighten screws evenly.
- Ensure tight cable connection.
- Tighten screws evenly.
Install the batteries and test the lock
Note: Do not use rechargeable batteries or Non-alkaline batteries.
- Install 4 AA batteries in battery pack.
- Test the lock.
- Press and hold , the latch bolt extends by itself.
- Enter preset code: 123456, press # , the latch bolt retracts by itself.
Warning: If the latch bolt extends or retracts not smoothly. please check the door opening direction and re-install the lock.
Programming Guide
Programming Symbols
Factory default settings
Change Programming Code
Important tips for programming
- For your safety, it is strongly recommended that you set and remember your programming code in time.
- When you enter the wrong button, you can press clear it.
- If you do not enter any buttons within 15 seconds, the system will exit the programming mode, and you can attempt programming procedure again.
First time registration
If you have set a password in the “Tuya Smart” app as an administrator, you
can ignore this step because the password set in the app is the programming
code.
If your lock is new, the factory preset code is none,Please set it up asap,The
new programming code must be 6 digits,Touch to light up keyboard then:
- The lock can be set with 1 PC programming codes and 997 UC user codes or IC Intelligent cards.
- The first three registrations are PC programming codes, and the latter are users, both UC user codes and IC Intelligent cards are acceptable.
Not first-time registration
Touch to light up keyboard then:
Advanced Setting Options
Auto-lock
- Press keys 2 and 8 immediately after unlocking to enable the automatic locking function, The latch will automatically lock back within tens of seconds after each unlocking.
- When the product is powered off and restarted, the automatic locking function will be turned off.
Factory default reset
- A factory reset will delete all codes associated with the lock.
- Find a paper clip, put it into the hole at the bottom, long press for 5 seconds until the lock voice prompts “initialized successfully”
Warning: The lock has been reset successfully. All entered information has been deleted.
Smart Home Platform
- The lock supports TUYA Bluetooth protocol,you can manage your lock by connecting TUYA APP Search “TUYA” in the app market or scan the code to get the APP.
How to connect the app
- Step 1: Open TUYA APP, click to add device
- Step 2: Choose Security & Surveillance- Lock(BLE)
- Step 3: Click on the scanned device and Next
- Step 4: Edit your device name
- Step 5: You can press the icon to unlock via Bluetooth, and manage your device on your phone.
Basic Functions Of The App
Introduction to some functions
- You can manage almost the full functionality of your lock on your phone.
Note
-
It is recommended to use the APP to set your lock from the beginning.
-
The programming code set by the APP will replace the programming code that has been set on the lock in turn.
-
Programming code
-
User code
-
Intelligent cards
-
Unlock records
-
Member management
-
Dynamic password
System language & volumeFor more functions, please refer to the APP.
If you have any questions, please contact us at any time.
Email: Aftersale@hotata.com
FCC STATEMENT
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
TEMPLATE
Scan the QR code or visit the link: https://www.youtube.com/@hotataaftersale/playlists to watch video tutorials, which can help you better understand the installation and usage of the product.
Scan QR code for video tutorials
Customer Service
- 1 Year Warranty
- Lifetime Customer Support
- Quality Assurance
- Support Return and Exchange
- Email US: aftersale@hotata.com
Check out our video tutorials available at: https://www.youtube.com/
@hotataaftersale/playlists
Scan QR code for video tutorials
Documents / Resources
|
HOTATA 3109 Smart Lock for Front
Door
[pdf] User Manual
3109, 3109 Smart Lock for Front Door, Smart Lock for Front Door, Lock for
Front Door, Front Door, Door
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>