iKF Mini4 Mini Bluetooth Wireless Earbuds User Manual
- June 14, 2024
- iKF
Table of Contents
iKF Mini4 Mini Bluetooth Wireless Earbuds
Please read this manual carefully before you operating
You set and retain it for future reference
Welcome
Thank you for using the iKF-Mini4. We hope you will enjoy it!
What In The Box
Official package including
- Earbuds *2
- Charging case *1
- Charging cable*1
- User manual*1
Before use
Precautions
Before using this product, carefully read this manual and retain it for future reference. Additional warnings may be present on the product,packaging, or in the user instructions.
Safety
- Observe all warnings, precautions and instructions.
- CHOKING HAZARD-Small parts. Not for children under 6 years.
Use and handling
- Permanent hearing loss may occur if the headset is used at high volume. Set the volume to a safe level. Over time, increasingly loud audio may start to sound normal but can actually damage your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the sooner your hearing could be affected. To protect hearing:
- Limit the amount of time you use the headset at hiah volume.
- Avoid raising the volume to block out noisy surroundings.
- Lower the volume if you can’ t hear people speaking near you.
- Do not use the headset if it causes discomfort to your skin. If the headset causes discomfort to your skin, discontinue use immediately. If symptoms do not subside even after discontinuing use,seek medical attention.
- Do not force tip of the headset earpiece down the ear canal. If the earpiece tip becomes lodged in the ear canal, seek medical attention immediately.
- Applying excessive pressure to the earpiece may injure the outer ear. Do not wear the headset while sleeping or in other situations where pressure may be exerted against the earpiece.
- Do not expose the headset or accessories to high temperatures,high humidity or direct sunlight.
- Do not put heavy objects on the headset or accessories.
- Do not allow liquid or small particles to get into the headset or accessories.
- Do not throw or drop the headset or accessories or subject them to strong physical shock.
- Do not place any rubber or vinyl materials on the product exterior for an extended period of time.
- Make sure the headset is kept clean and free of ear wax buildup to maintain the specified product performance.
- Use a soft, dry cloth to clean the headset or accessories. Do not use solvents or other chemicals. Do not wipe with a chemically-treated cleaning cloth.
- Keep all products, cords, and cables away from operating machinery. As with all corded products, there is a danger of strangu-lation if a cord should become wrapped around your neck.
- Do not disassemble or insert anything into the headset or charging cradle because this may cause damage to the internal com-ponents or cause injury to you.
- Comply with laws regarding use of a mobile phone and headset while driving. If you use the headset while driving, make sure that your attention and focus remain on driving safely.
- Observe all signs and instructions that require an electrical device or radio product to be switched off in designated areas, such as gas/refuelling stations, hospitals, blasting areas, potentially explosive atmospheres or aircraft.
- Avoid the eyes of children or animals when the indicator light of the headset is flashing.
Getting assistance
For assistance with this product, please contact our customer service at the website where you purchased the product, leave a message or email us, we will answer as soon as possible.
- Company: Shenzhen Om Technology Co., Ltd.
- Address: Room 315-318, Building D, Nanxin Industry International, Hongtu Road, Nancheng, Dongguan, Guangdong, China.
- URL: http://ikf.net.cn
- Email: supportikf@163.com
Overview
Specifications
- Model: iKF-Mini4
- Bluetooth version: 5.3
- Power input: DC 5V
- Charging interface: TYPE-C USB
- Playtime: about 4-5 hours
- Charging case battery capacity: 250mAh
- Charging time: about 2 hours
- Earphone input parameters: 5V 30mA
- Charging case input parameters: 5V 350mA
- Supporting agreement: HSP/HFP/A2DP/AVRCP
How to charge
For the first time use, please fully charge the product.
Earphone charging
Please put the earphone into the charging case.
- Charging: Green light on and then off
- Full power: Green light is always on
- Charging time: 40-60minutes
Low battery alarm: The earphone keeps beeping “Du”
Notice: When the current and voltage of the earphone is lower than the normal value (cannot be turned on), it needs to be put into the case for wired charging for 15 minutes can resume normal use. (Generally, this state will only appear if it is not used for a long time)
Charging case charging
- Charging: Orange light is always on
- Full power: Green light is always on
- Charging time: 1-2 hours
How to Check the Battery Status of the charging case
Click the function button on the back of the charging case.
- The green light is on for 3S: ≥30%
- The orange light is on for 3S: 5%-29%
- Orange light flashes for 3S: <5% ( Please charge the box in time )
How to connect
Take the earphones out of the charging case, the earphone will connect each other automatically, wait 3-5 seconds, then turn on the mobile phone’s Bluetooth search device, “iKF-Mini4” appears, click to connect.
NOTICE
- When you want to use a earbud, just take one out. If you want to use a dual earphones, take out another earphone, and the earphones will automatically connect.
- Put the earphones back into the charging case, the earphones will automatically turn off when the charging case is closed.
- After successfully connecting for the first time, put the earphones back in the charging case to charge it, and then turn it on again, the earphones will automatically connect to the last connected device.
How to Wear
Operation
Call with earphone
R/L | Double click | Answer |
---|---|---|
R/L | Double click | Hand up |
R/L | Long press for 2 seconds | Incoming telegram: Reject |
Listen to music with earphones
R/L | Double-Click | Play/Pause |
---|---|---|
R/L | Quick click 3 times | Wake up voice assistant |
R | Long press for more than 2S | Next song |
L | Long press for more than2S | Previous song |
R | Click the right earphone | Volume up |
L | Click the left earphone | Volume down |
Turn on/off game mode
- Turn on: When the earphons in the charging case, open the charging case and keep open, press the function button on the back of the charing case 2 times continuously, The white light of the charging case will flash [2 times] and turn off, which means that the game mode is turned on.
- Turn off: Put the earphones back into the charging case and close it, the game mode is turned off.
Reset
- When the earphons in the charging case,open the charging case and keep open, press the function button on the back of the charing case 5 seconds, The white light of the charging case will flash [5 times] then turn off.
- At this time, the reset is successful.
TIPS
- In binaural mode, covering the earphones with either hand can cause poor signal;
- Make sure the earphone and the connected device are within a valid connection range and there are not too many obstacles that interfere with the signal;
- It is normal for the earphone to be disconnected occasionally. Just like WiFi, occasionally the connection is unstable. It may be due to interference in signal transmission. Please wait a moment or change the location to resolve;
- When the earphone cannot be connected to the device, please check whether the earphone has power or Is connected to other devices;
- The headset cannot be connected to multiple devices at the same time. When changing the connected device, please perform the “Forget this device” operation on the last connected device.
- If the product has not been used for a long time, please charge it first.
- When the volume of the two earphones is not the same or the audio is not synchronized, put the 2 earphones back into the charging case, close it and then open it again. If the same problem still occurs, please perform the “Forget this device” operation , Turn off the Bluetooth and then restart the phone and the earphones. Turn on the Bluetooth for pairing again.
- Do not wear the product for bathing, or use it in the rain, and do not soak the product in water. After each normal use, it is recommended to dry the sweat or stains on the earphones with a dry cloth, paper towel, etc., and then store it.
Limited warranty
Warranty period: 1 year from the date of product receipt
- During the warranty period of the product, due to the quality of the product itself, please contact us with the warranty card and shopping records to receive a return authorization / free maintenance and shipping instructions.
Fault Table
1, Bluetooth headset cannot hear sound;
2, The other side cannot hear the voice during the call;
3, Unable to charge Bluetooth headset
The following conditions will not provide free repair
- Unauthorized maintenance, misuse, collision, neglect, abuse, accident, alteration, or damage or alteration of the appearance of the product;
- The product exceeds the warranty period specified by the company;
- Damage caused by self-disassembly;
- Failures caused by accidents such as water ingress or falling, squeezing, etc;
- Normal wear and dirt caused by use, such as scratches, damage caused by contact with chemical reagents, contact with sharp objects, etc;
- Outer packaging and accessories, gifts, services other than the products promised by the sales staff, and additional configurations and gifts;
- Improper storage: If the product is exposed to abnormal humidity and temperature for a long time, the performance is damaged;
- Failure or damage caused by force majeure;
We apologize for any inconvenience caused by any typographical or translation
errors.If the content is corrected later, please forgive us without notice.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>