iKF B09YRGYD9J Find Pro Wireless Earbuds User Manual

: June 11, 2024
: iKF

iKF B09YRGYD9J Find Pro Wireless Earbuds

iKF B09YRGYD9J Find Pro Wireless Earbuds

Please read this manual carefully before you operating You set and retain it for future reference.

Welcome

Thank you for using the iKF-Find-Pro. We hope you will enjoy it!

Official package including
Earbuds *2
Charging case *1
Charging cable*1
User manual*1

Warnings

When charging the charging case of this product, to avoid damage to the charging case, please use the supplied standard data cable or a standard wireless charging device use a 5V / 2A charger, do not use a fast charging charger exceeding 5V / 3A.Charge the headset according to the supplied instructions.

Before use

Precautions

Before using this product, carefully read this manual and retain it for future reference. Additional warnings may be present on the product, packaging, or in the user instructions.

Safety

Observe all warnings, precautions and instructions.
CHOKING HAZARD -Small parts. Not for children under 6 years.

Use and handling

Permanent hearing loss may occur if the headset is used at high volume. Set the volume to a safe level. Over time, increasingly loud audio may start to sound normal but can actually be damaging your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the sooner your hearing could be affected. To protect your hearing:
Limit the amount of time you use the headset at high volume.
- Avoid raising the volume to block out noisy surroundings. Lower the volume if you can’ t hear people speaking near you.
Do not use the headset if it causes discomfort to your skin. If the headset causes discomfort to your skin, discontinue use immediately. If symptoms do not subside even after discontinuing use, seek medical attention.
Do not force tip of the headset earpiece down the ear canal. If the earpiece tip becomes lodged in the ear canal, seek medical attention immediately.
Applying excessive pressure to the earpiece may injure the outer ear. Do not wear the headset while sleeping or in other situations where pressure may be exerted against the earpiece.
Do not expose the headset or accessories to high temperatures, high humidity or direct sunlight.
Do not put heavy objects on the headset or accessories.
Do not allow liquid or small particles to get into the headset or accessories.
Do not throw or drop the headset or accessories or subject them to strong physical shock.
Do not place any rubber or vinyl materials on the product exterior for an extended period of time.
Make sure the headset is kept clean and free of ear wax buildup to maintain the specified product performance.
Use a soft, dry cloth to clean the headset or accessories. Do not use solvents or other chemicals. Do not wipe with a chemically- treated cleaning cloth. Keep all products, cords, and cables away from operating machinery. As with all corded products, there is a danger of strangulation if a cord should become wrapped around your neck.
Do not disassemble or insert anything into the headset or charging cradle because this may cause damage to the internal components or cause injury to you.
Comply with laws regarding use of a mobile phone and headset while driving. If you use the headset while driving, make sure that your attention and focus remain on driving safely.
Observe all signs and instructions that require an electrical device or radio product to be switched off in designated areas, such as gas/refueling stations, hospitals, blasting areas, potentially explosive atmospheres or aircraft.
Avoid the eyes of children or animals when the indicator light of the headset is flashing.

Getting assistance

For assistance with this product, please contact our customer service at the website where you purchased the product, leave a message or email us, we will answer as soon as possible.

Company: Shenzhen Om Technology Co., Ltd.
Address: Room 315-318, 3rd Floor, Building D, Nanxin Products International, Nancheng District, Dongguan City, Guangdong ,China.
Email : supportikf@163.com

Part Names

Specifications

Model: iKF-Find-Pro
Bluetooth version: 5.2
Power input: DC 5V
Charging interface: TYPE-C USB
Playtime : about 5-6hours
Single earphone battery capacity :3.7V/40mAh
Charging case battery capacity :3.7V/500mAh
Charging time: about 1 hour(Min)
Supporting agreement: HSP/HFP/A2DP/AVRCP
Headphone input parameters: 5V ⎓ 35mA
Charging case input parameters: 5V ⎓ 320mA
Output parameters of charging box: 5V ⎓ 300mA

How to charge

For the first time use, please fully charge the product.

Earphone charging

Please put the headset into the charging case.
Charging: White light flashes slowly
Full power: White light off
Charging time: 40-60minutes

Low battery alarm: the alarm sounds once every minute

Charging case charging

Charging: orange light is always on
Full power: green light is always on
Charging time: about 2 hours

Low battery alarm: orange light flashes slowly for 3 seconds

How to connect

Open the charging case, the earphones will connect each other automatically ,wait 3-5 seconds, then turn on the mobile phone’s Bluetooth search device, “iKF-Find-Pro” appears, click pairing. Pick up headset from charging case and wear.

How to connect

NOTICE

When you want to use a earbud, just take one out. If you want to use a dual earphones, take out another earphone, and the earphones will automatically connect.
Put the earphones back into the charging case, the earphones will automatically turn off when the charging case is closed.
After successfully connecting for the first time, put the earphones back in the charging case to charge it, and then turn it on again, the earphones will automatically connect to the last connected device.

How to use

Operation

Call with iKF Find Pro

R/L| Double-click| Answer/ Hang up During a call: Hold the existing call and answer the second call During a call: two calls switch between each other
---|---|---
R/L| Long press for 2 seconds| Incoming telegram: Reject

Listen to music with iKF Find Pro

R/L	Double-click	Play/Pause
R/L	Quick click 3 times	Wake up voice assistant
R	Long press for 2 seconds	Next song
L	Long press for 2 seconds	Previous song
R/L	Quick click 6 times	Turn on/off in-ear detection

Turn off and Reset

Turn off	Put the headset back into the charging case, Close
Reset	When the headset is not connected to the phone, click 3 times and

hold it for more than 2 seconds for the third time

TIPS

In binaural mode, covering the earphones with either hand can cause poor signal;
Make sure the headset and the connected device are within a valid connection range and there are not too many obstacles that interfere with the signal;
It is normal for the headset to be disconnected occasionally. Just like WiFi, occasionally the connection is unstable. It may be due to interference in signal transmission. Please wait a moment or change the location to resolve;
When the headset cannot be connected to the device, please check whether the headset has power or is connected to other devices;
The headset cannot be connected to multiple devices at the same time. When changing the connected device, please perform the “Forget this device” operation on the last connected device.
If the product has not been used for a long time, please charge it first.
When the volume of the two earphones is not the same or the audio is not synchronized, put the 2 earphones back into the charging case, close it and then open it again. If the same problem still occurs, please perform the “Forget this device” operation ,Turn off the Bluetooth and then restart the phone and the earphones. Turn on the Bluetooth for pairing again.

Limited warranty

Warranty period: 1 year from the date of product receipt

During the warranty period of the product, due to the quality of the product itself, please contact us with the warranty card and shopping records to receive a return authorization / free maintenance and shipping instructions.

Fault Table

1	Bluetooth headset cannot hear sound;
2	The other side cannot hear the voice during the call;
3	Unable to charge Bluetooth headset

The following conditions will not provide free repair

Unauthorized maintenance, misuse, collision, neglect, abuse, accident, alteration, or damage or alteration of the appearance of the product;
The product exceeds the warranty period specified by the company;
Damage caused by self-disassembly;
Failures caused by accidents such as water ingress or falling, squeezing, etc;
Normal wear and dirt caused by use, such as scratches, damage caused by contact with chemical reagents, contact with sharp objects, etc;
Outer packaging and accessories, gifts, services other than the products promised by the sales staff, and additional configurations and gifts;
Improper storage: If the product is exposed to abnormal humidity and temperature for a long time, the performance is damaged;
Failure or damage caused by force majeure;

We apologize for any inconvenience caused by any typographical or translation errors. If the content is corrected later, please forgive us without notice.

Made in China

Documents / Resources

| iKF B09YRGYD9J Find Pro Wireless Earbuds [pdf] User Manual
B09YRGYD9J Find Pro Wireless Earbuds, B09YRGYD9J, Find Pro Wireless Earbuds, Wireless Earbuds, Earbuds
---|---