DEPSTECH NTC52 Triple Lens Endoscope Camera with Light User Manual
- June 14, 2024
- DEPSTECH
Table of Contents
Industrial Endoscope
NTC52
Product Features
DEPSTEGH is a booming technology company, specialized in creating various
endoscopes and committed to make you feel more secure.
NTC52 is a high-performance industrial endoscope. After connecting to the
mobile phone, it can take photos and videos on the App and save them in the
mobile phone photo album. Such camera uses high-performance CMOS chip that
supporls the record-high frame rate to get clear images with Bluart 3.0
technology, widely used in industrial maintenance, appliance maintenance,
mechanical maintenance and design and other fields.
Special Warning and Notice
- This product is a camera of indusirial endoscope, not applicable to medical or physical ‘examination!
- In order to lengthen the battery lif, it is recommended that you should charge the device once ‘every 3 months whether it is used.
- Do not ry to replace interal battery by yourself, because unprofessional operation may lead to tisks of personal injury due to battery overheating, efc.
Safety and Protection
- Probe of camera is an electronic device of high precision, so please do not hit the probe of camera. or pull the cables, which may lead to failure of the device.
- With IP67 waterproof layer, the probe shall be used with extra care and protected from scratches!
- Camera probe is made from materials that are not high temperature resistant, so make sure the interal temperature of any internal combustion engine or other equipment whose internal temperature is higher has been cooled when they are examined, otherwise the device wil be directly damaged!
- In case of device damaged, please do not dismantle it by yourself, but contact the seller or the ‘supplier for more professional maintenance Services.
- Children may not use this device independently without the guidance of aduls.
Operating and Storage Environments
- The device should be operated at an ambient temperature of 32-113°F (0~45°C).
- The device should be stored in a dry, clean, oil-ree and waterless place without any chemical liquid.
Product introduction
Operating Guide
-
APP Download Guide
Scan the QR code below with your mobile phone to download the “DEPSTECHCAM” APP.
Android users (Android 9.0+):
Search and download the “DEPSTECHCAI” APP in Google Play Store. Ios users (108 114):
Search and download the “DEPSTECHCAN” APP in the APP Store. -
Install a mobi phone
Adjust the knob of the mobile phone supporting bracket, install the mobile phone on the mobile phone supporting bracket (support 3.5-6.3-inch display mobile phone), and connect the mobile phone and products with the data cable.
Supporting bracket installation instruction
1. The mobile phone supporting bracket is aligned with the screw on the product and rotates clockwise 50 that the supporting bracket can be tightened on the product,
2. Screw the nut on the supporting bracket by hand to open and then install the mobile phone. -
Power on
Press the Power bution on the product for 2 seconds to boot, and the work indicator lights up green. At this time, Android phones will automatically open the APP (iPhones need to open the APP) and the camera LED lights up to enter the preview interface. -
LED light adjustment
After booting, the LED light is the brightest by default, and clck button to adjust the brightness; the brightness is divided into three gears, and the LED lights are tumed off in the fourth gear. -
Take photos / videos
Click button to take photos. Hold this button for 2s to start or end video record. -
Switching cameras
After the product is powered on, the camera can be switched (the main/side camera is switched) by clicking the Power button alone. -
Charging Instructions
Please connect Type_C charging cable with 5V adapter for charging -
After booting, the device is not connected to the mobile phone, and will automatically shut down after 10 minutes.
APP introduction
Performance parameters
Model | Single lens | Double lens | Triple lens |
---|---|---|---|
Len diameter | 8.5mm | 9mm | 8mm |
Focal length | 4-15cm | ||
(1.57-5.90in) | Main Lens (A): 3-10cm (1.18-3.93 in) Side Lens (B): | ||
2-6cm (0.79-2.36 in) | Main Lens(A): 3-10cm (1.18-3.93 in) Side Lens(B): 2-6cm |
(0.79-2.36 in) Side Lens
(C). 1.5-2.5cm (0.59-0.98 in)
Camera View| 86°| 85°| 80°
Photo resolution| 25921944| Main Lens (A):
25921944
Side Lens (B):
1280720| Main Lens(A): 19201080 Side Lens(B): 19201068 Side Lens(C):
19201056 (A)+(B): 1920720 (A)+(C): 1920708
Video Spec
Battery life| 2H
Charging time| 3H
Charging Voltage
and current| DC 5V/2A
Guide for Accessories Installation
Installation method:
Packing list
FCC Requirement: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority 1o operate
the equipment.
“This device comples with Part 15 of the FCC Rules. Operation s subject to the
following two contons:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the fimits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmiul interference in a
residential installation. “This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmiul interference 1o radio communications. However,
there is no guarantee that interference will ot ocour in a partcular
installation.
If this equipment does cause harmful inferference to radio or television
reception, which can be determined by turing the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment nto an outlet on a circuit different from that to which the. receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
-
CE compliance: This device complies with EN 60065 standard, which means this device will not do harm o the user or products as following situations: 1)Electric shock 2)High temperature3)Radiation 4)Explosion from inner 5)Mechanical Harm 6)Fire Hazard 7)Chemical burns.
-
EU Conformity Statement: This product and – f applicable – the supplied accessories 100 are marked with “CE* and comply therefore with the applicable harmonized
European standards listed under the EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU and Amendment (EU) 2015/863. -
WEEE Notice: 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste i the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info
-
2013/56/EU (battery directive):
This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specifc battery information. The battery is marked wih this symbol, which may include lettring to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info
EC REP: E-CrossStu GmbH. Mainzer Landstr.69,60329 Frankfurt am Main
UK REP: DST Co., Ltd. Fifth Floor 3 Gower Street, London, WC1E GHA, UK
Customer Services
Please contact us if you have any questions, we love to hear from you
www.depstech.com
support@depstech.com
Facebook Official Page: @DEPSTECH. FANS
Shenzhen Deepsea Innovation Technology Co., Ltd.
Room 1901-1902, Jingizhgu Buiding, No.1 Tanging Road, Nanshan Distrct, 516055,
Shenzhen, CN
Made in China
or 2208
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>