Tera 6100 Wireless Barcode Scanner User Manual

Tera 6100 Wireless Barcode Scanner

Model: 6100
Wireless Laser 1 D Barcode Scanner with Charging Cradle

User Manual
Ver.03.1.02

About This Manual

• An asterisk (*) next to an option indicates the default setting.
• Scanners are factory-programmed for the most common terminal and communication settings.
• If settings need to be changed, you can reprogram by scanning the barcodes in this manual.

Note:

• For the correct use of the product, please read this manual carefully and do not scan configuration bar codes at random. Otherwise, some settings will be temporarily unavailable.
• The scanner’s keyboard layout default is a US keyboard.

Please do not hesitate to contact us if you have any questions.

Important Notice:
Please include your Order Number and Product Model Number in the email.

Official Customer Service

• Email Address: info@tera-digital.com
• Cell: +1 (909)242-8669
• Whatsapp: +1 (626)438-1404

Follow us:

• Instagram: tera_digital
• Youtube: Tera Digital
• Twitter: Tera Digital
• Facebook: Tera

User manuals are available in Spanish, French, Italian, and German, and can be downloaded from our website. You may visit our official website via the link below or by scanning the given QR code: https://www.tera-digital.com.

Factory Default Settings

If you aren’t sure what programming options are in your scanner, or you have changed some options and want to restore the scanner to factory default settings, scan the barcode below. Please note that the scanner will power cycle after scanning the code.

Firmware Version

Scan the Version Number to check the current scanner firmware version.

Beeper

Beeper Volume

Operation

Operation Modes
This wireless scanner features two operation modes: real-time mode and storage mode. To change/switch operation modes, scan Real Time Mode or Storage Mode.

Real-Time Mode

In this mode, the scanner transmits scanned data immediately after each scan.

Storage Mode

When the scanner is in storage mode, the scanned data is stored in the memory of the scanner instead of being directly transmitted to the host device. To check or clear stored barcodes, scan the appropriate codes from the below section.

Note:
The stored data will not get lost unless the Clear All Barcodes Stored symbol is scanned.

Upload All Barcodes Stored

• When you need to upload the barcodes stored in the scanner to the computer or mobile device, scan the barcode below to enable the scanner to upload data.
• The barcode stored in the scanner will not be deleted in any operation mode after the data transmission is complete.

Total Records
When you need to check the total number of barcodes stored in the scanner, scan the Total Records to transmit the total number of data stored in the scanner to the computer or mobile device.

Clear All Barcodes Stored
When you need to clear the barcodes stored in the scanner, scan the Clear All Barcodes Stored.

Wireless Pairing

• Scan the barcode below within 15 seconds after the receiver is plugged into a USB port.
• The scanner will emit two beeps if the scanner is connected to the charging cradle, indicating pairing is successful.

Sleep Timer

How to set a sleep timer: first scan Set Sleep Timer, then scan the appropriate Timer Code below depending on your needs.

Vibration

Battery Level

Scan the following code to see how much battery the scanner has left.

Note:
For the scanner to transmit battery percentage information, please launch Notepad and ensure the cursor is in the text field before scanning the Show Battery Level symbol.

Keyboard Country Layout

The keyboard layout default is a US keyboard. To change this layout, scan the appropriate Keyboard Country barcode below.

Case Conversion

Alphabetic keyboard characters can be forced to be all upper case or all lower case. So if you have the following barcode: “AzeRTY”, you can get the output “AZERTY” by scanning Convert All Characters to Upper Case, or to “azerty” by scanning Convert All Characters to Lower Case.

Upload Speed

Scanning Modes

Manual Trigger Mode

Continuous Scan Mode

Data Editing

Prefix Selection

Add a prefix
Scan the “Add Prefix” symbol and then scan the codes representing the desired characters from “Appendix – Programming Chart”. The maximum size of a prefix configuration is 16 characters.

For example: Add letters V and C as a prefix

1. Scan the “Add Prefix” symbol.
2. Scan the barcodes with letters V (1086) and C(1067) underneath their symbols from the Appendix.
3. Scan the “Save and Exit” barcode to finish the programming process.

Note:
Prefix and Suffix characters are data characters that can be sent before and after scanned data. They will be sent with all symbologies.

Clear Prefixes
Scan the following code to clear all configured prefixes.

Suffix Selection

Add a suffix

• Scan the “Add Suffix” symbol and then scan the codes representing the desired characters from “Appendix – Programming Chart”.
• The maximum size of a suffix configuration is 16 characters.

Note:
Prefix and Suffix characters are data characters that can be sent before and after scanned data. They will be sent with all symbologies.

Clear Suffixes
Scan the following code to clear all configured suffixes.

Removal of Characters

If you need to drop characters, please scan the digit codes below depending on your needs. For example, if you have the following barcode, ABC123XYZ, you can make the output “123X” by scanning 3 digits from the Remove the First Characters section and scanning 2 digits from the Remove the Last Characters section.

Remove the First Characters

Remove the Last Characters

Terminators

Terminators (Termination Suffixes)
By default, the scanner is programmed with a Carriage Return (Enter) suffix. If you need to remove or replace it, please scan the appropriate code below.

UPC/EAN/JAN Addenda

Symbologies

UPC-A
UPC-A On/Off

UPC-A Check Digit

Number System Digit

UPC-A Converted to EAN-13

UPC-E
UPC-E On/Off

UPC-E Check Digit

UPC-E Leading Zero

UPC-E Converted to UPC-A

EAN-8
EAN-8 On/Off

EAN-8 Check Digit

EAN-13
EAN-13 On/Off

EAN-13 Check Digit

EAN-13 Converted to ISBN

EAN-13 Converted to ISSN

Code 128
Code 128 On/Off

Code 128
Code 128 On/Off

Code 39 Full ASCII

Code 32 (PARAF)
Code 32 On/Off

If the scanner is not scanning Code 39 barcodes correctly, please disable Code 32.

Code 93
Code 93 On/Off

Code 11
Code 11 On/Off

Codabar (NW-7)
Codabar On/Off

Codabar Start/Stop Characters

Interleaved 2 of 5
Interleaved 2 of 5 On/Off

Matrix 2 of 5
Matrix 2 of 5 On/Off

Industrial 2 of 5
Industrial 2 of 5 On/Off

Standard 2 of 5 (1ATA)
Standard 2 of 5 On/Off

MSI Plessey
MSI Plessey On/Off

Febraban FEBRABAN barcodes
Febraban On/Off

GS1 DataBar 14(RSS-14)
GS1 DataBar 14 On/Off

N.B. GS1 DataBar 14 is also known as GS1 Databar Omnidirectional, RSS-14.

GS1 DataBar Limited (RSS-Limited)
RSS-Limited On/Off

GS1 DataBar Limited is also referred to as RSS-Lim ited.

Appendix

Appendix – Programming Chart (For configuring Prefix and Suffix)

Contact Information

Official Customer Service

• Email Address: info@tera-digital.com
• Cell: +1 (909)242-8669
• Whatsapp: +1 (626)438-1404

Follow us:

• Instagram: tera_digital
• Youtube: Tera Digital
• Twitter: Tera Digital
• Facebook: Tera

User manuals are available in Spanish, French, Italian, and German, and can be downloaded from our website. You may visit our official website via the link below or by scanning the given QR code: https://www.tera-digital.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>