harmonizedhome IPL740B01BK Pendant Light Instruction Manual

PENDANT LIGHT
NEED HELP?
Call or Email us first

IPL740B01BK Pendant Light

Our service team is ready to answer your questions…
1-800-265-1833 (English) / 1-800-567-2513 (French)
IN CANADA – [email protected] 
IN USA – [email protected]
Monday – Friday
Creel aae

** INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TOOLS AND MATERIALS REQUIRED:**

SAFETY PRECAUTIONS:

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.
   NOTE: Product may not look exactly as shown in figures.

INSTALLATION:

1. Screw the center rod to the fixture.
2. Loosen “B”. Adjust stud to desired length and lock in place with “B”. Mount the mounting bracket to electrical box using electrical box screws (not included). Make sure the studs on the mounting bracket are facing out from the electrical box.
3. Adjusting the length of flexible cord. For safety, do not release the knot inside canopy.
4. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
5. Once wire connections are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
6. Install the light fixture to the ceiling by aligning the holes in the fixture with the studs on the mounting bracket. Secure fixture in place with star washers and cap nuts.
7. Remove spinner nut from socket. Position the glass on lamp and secure with spinner nut. (Please check the glass before installing for any cracks. Do not overtighten the spinner nut to attach the glass to the fixture.)
8. Install proper bulb type and wattage (not included).

Tel: 613-342-5424
Fax: 800-263-4598

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>