YOLINK YS8005-UC Smart Outdoor Temperature Humidity Sensor User Guide

Weatherproof
Temperature & Humidity Sensor
YS8005-UC
User Guide
Rev 1.0

YS8005-UC Smart Outdoor Temperature Humidity Sensor

Click to Visit
YS7805-UC_instruction – YS7805-UC_instruction.pdf (yosmart.com)
Outdoor Motion Sensor
YS7805-US, YS7805-EC

Thank you for purchasing YoLink products and for entrusng us with your smart home needs!
Your 100% sasfacon is our goal. If you experience any problems with seng up your new YoLink Weatherproof Temperature & Humidity Sensor, please give us a chance to assist you, before returning your purchase.
We at Customer Support are here for you.If you need any assistance installing, seng up or using a YoLink product or our app.

Find addional support and ways to reach us at: www.yosmart.com/support-and- service
Or scan this QR code with your smartphone

Email us, 24/7 at: service@yosmart.com
Call us, 9AM to 5PM Pacific Standard Time at: 949-825-5958
You may chat with us on Facebook (non-urgent maers): www.facebook.com/YoLinkbyYoSmart

Sincerely,
Queenie, Clair, James, Eric
Customer Support Team

Revised: 04/08/2021
Copyright 2021. YoSmart, Inc. All rights reserved

In the Box

A. Weatherproof Temperature &Humidity Sensor
B. Quick Start Guide

Introducon

The Weatherproof Temperature &Humidity Sensor is a smart two-in-one accurate thermometer and hygrometer device. By monitoring the real-me temperature and humidity levels in your home or business, you will know at any me the exact temperature and humidity levels in the space. You can set high and low levels alerts for temperature and humidity. When an alert level is reached, the LED will blink red once, and noficaons will be sent to you via the YoLink app.
Available noficaon types are: email, and banner (“push”) noficaons on your Apple or Android smartphone, each configurable in app sengs.
*High-volume use fees may apply (subscription service available)

The LED light indicates the current status of the Weatherproof Temperature &Humidity Sensor:![YOLINK YS8005 UC Smart Outdoor Temperature Humidity Sensor

• Temperature &Humidity Sensor](https://manuals.plus/wp- content/uploads/2023/11/YOLINK-YS8005-UC-Smart-Outdoor-Temperature-Humidity- Sensor-Temperature-Humidity-Sensor.jpg)

Set Up

C-1. Set Up – First-Time YoLink Users (Exisng users proceed to C-2. Add Device, next page)

1. Download the YoLink app through Apple App Store or Google Play Store (Search in the store or use the QR code on the right)
   |
   ---|---
   http://apple.co/2Ltturu| http://bit.ly/3bk29mv

Apple iPhone or tablet that is iOS 9.0 or higher, or an Android phone or tablet that is Android 4.4 or higher

2. Log in to the YoLink app
   Create a new account if required

3. The YoLink Hub is required to set up your Weatherproof Temperature & Humidity Sensor. Please set up your YoLink Hub first (refer to YoLink Hub manual)

4. Make sure your Hub is connected to the internet (green LED indicator is blinking, blue LED indicator is always on)

5. Ethernet patch cable (included) to your network (router, switch, etc.), recommended. Otherwise connect your Hub to your home 2.4 GHz Wi-Fi network (only when necessary).
   Refer to the Hub set up manual for more informaon:
   YS1603-UC
   User Guide

C-2. Add Device

1. Tap “ ” button, then scan QR Code on the device. Follow the steps to add the device

2. Press the SET buon once to turn on the device. The Status LED will blink red once, then green several mes, indicang your device has connected to the cloud and is ready to use

3. You will need to press the SET buon once again if the device failed to connect to the cloud

4. Pressing the SET buon at any other me aer this inial process will result in the LED blinking red once, only. This indicates the device is connected to the cloud and is funconing normally

5. If the red LED does NOT blink as noted this may indicate a problem with the sensor. Please see the troubleshoong secon and the contact secon for technical support

C-3. Device Placement

• Wall-mounng: hang the sensor from the wall, on a nail or screw or other secure object, using the mounng ring
• Surface-, Shelf- or countertop-mounng: place the sensor on a stable surface so that it will not fall off or be knocked down

1. The sensor must NOT be submerged
2. For accurate readings, do not obstruct the openings on the sensor
3. Do not place the sensor on or near sources of extreme heat or cold
4. While this device is designed for outdoor use, refer to the environment operang range informaon on page 17. Use of this device for applicaons outside of the environmental operang range is likely to damage the sensor, which is NOT covered by the warranty

Using the YoLink App

D-1. Device Page

Sensor Refresh Frequency
● Both temperature and humidity values refresh when one of the following condions are met:

a. The SET buon has been pressed| b. At least 0.9°F(0.5°C) change over a period longer than 1 minute| c. At least 3.6°F(2°C) change within 1 minute
---|---|---
| |
d. At least 10% change over a period longer than 1 minute| e. Device alert level reached or restored to normal range| f. Otherwise, the values will be refreshed automacally once an hour
| |

D-2. Details Page

Alert Settings

a. Enable or disable alert
– Receive noficaons when the temperature value or humidity value low alert value or above the high alert value set below is below the
b. Slide to set the low temperature alert value (Default is 64°F (18°C)
c. Slide to set the High temperature alert value (Default is 95°F (35°C)
d. Slide to set the low humidity alert value (Default is 0%)
e. Slide to set the high humidity alert value (Default is 100%)
f. Enable or disable re-noficaon aer a temperature or humidity alert
g. Set the re-noficaon duraon between addional alerts
h. Tap to save the sengs

D-3. Automaon
● Go to the “Smart” screen, tap “Automaon”
The Weatherproof Temperature & Humidity Sensor can be set as a trig ger only, with four trig ger opons: Low Temperature Alert; High Temperature Alert; Low Humidity Alert; High Humidity Alert

a. Tap the “+” icon to add an automaon
b. Add an automaon
b-1 Edit name
b-2 Edit trigger
b-3 Edit behavior (You must have at least one acon device, or you cannot set a behavior)
b-4 Edit when (Set a me range for the automaon: always or during specific days or mes)
b-5 Tap to save the sengsc. Click to edit the automaon

1. Tap “ ” buon to enable or disable the automaon
2. Swipe leo view the history logs and to edit or delete the automaon

D-4. Voice Assistants
Connect YoLink with Alexa to monitor the status of your devices through voice commands

• Tap “ ” in the upper left corner to go to My Profile
• Go to Settings > Voice Assistants for the applicable voice assistant integration guide

YoLink Weatherproof Temperature & Humidity Sensor is integrated with Alexa, and is also integrated with IFTTT.com (works as a trigger device using IFTTT)

Maintenance

E-1. Firmware Update
To ensure our customers have the best user experience, we highly recommend you update to the newest version firmware when an update is available

• In “Firmware”, if a new version is listed as available (#### ready now), click it to start the firmware update process
• The device’s firmware will be updated automacally within 1 hours (maximum). To force an immediate update, press the SET buon on the device twice to make the device enter update mode
• You may use your device during the update as it is performed in the background. The LED light will slowly blink green during the update and the process will be complete within 2 minutes aer the light stops blinking

E-2. Factory Reset
Factory reset will erase all of your sengs and restore it to factory defaults. Aer the factory reset, your device will remain in your Yolink account

• Hold the SET buon for 20-25 seconds unl the status light blinks red and green alternately, then, release the buon (Hold the SET buon longer than 25 seconds will ABORT the factory reset operaon)
• Factory reset will be complete when the status light stops blinking

E-3. Replacing the Baeries
Tools Required:

1. To maintain the waterght design of your Weatherproof Temperature & Humidity Sensor, use extreme care and follow the baery replacement instrucons closely

2. Do not mix old and new baeries

3. Make sure that the boom shell and sealed rubber pads are ghtly secured. Otherwise, the entry of water into the sensor may cause severe damage

4. Use tweezers to take out the four sealed rubber pads at the base of the device

5. Use a screwdriver to unscrew the screws at the base of the device and remove the base

6. Remove the two old baeries

7. Install two new AAA baeries

8. Close and secure the base by reinstalling and tightening the four screws

9. Reattach the four sealing rubber pads

Specificaons

14°F – 41°F, +0.72°F (-10°C – 5°C, +0.4°C)
41°F – 140°F, +0.36°F (5°C – 60°C, +0.2°C)
140°F – 176°F, +0.72°F (60°C – 80°C, +0.4°C)
Temperature Error (Maximum):| -40 – -4 , °F °F ±2.7°F (-40 – -20 °C °C, ±1.5°C)
-4°F – 32°F ±, 1.8 ( °F -20°C – 0°C, ±1°C)
32°F – 41°F ±, 0.9 °F (0°C – 5°C, ±0.5°C)
41°F – 140°F ±, 0.72 °F (5°C – 60°C, ±0.4°C)
140°F – 176°F ±, 1.35 °F (60°C – 80°C, ±0.75°C)
Humidity Error (Typical, @77 °F (@25°C)):| 0% – 20% / 80% – 100%, ±3.5%
20% – 80%, ±2%
Humidity Error (Maximum, @77 °F (@25°C)):| 0% – 20% / 80% – 100%, ±7%
20% – 80%, ±3.5%
Environment:| Working Temperature: -22°F – 158°F (-30°C – 70°C)
Working Humidity: ≤95% (non-condensing)

Troubleshoong

Symptoms:

1. Device is offline.
   – If sensor is not connected to the cloud, press the SET buon on the Weatherproof Temperature & Humidity sensor once
   – If Hub is offline, reconnect the Hub to the Internet and press the SET buon on the Weatherproof Temperature & Humidity sensor once
   – If Hub is not on, power on the Hub again and press the SET buon on the Weatherproof Temperature & Humidity sensor once
   – If sensor is out of range with Hub, relocang the sensor or Hub may be required
   – For a device with low-baery indicators or alerts or if the condion of the baeries is in queson, replace the baeries with two premium “AAA” lithium baeries

2. Receive noficaons out of the alert range: Alert sengs are not saved. Refer to “Details page” secon on page 9

3. Other issues, contact customer service, 1-949-825-5958 (M-F 9am – 5pm PST) or email 24/7 at service@yosmart.com

Warning

• Please install, operate and maintain the Weatherproof Temperature & Humidity Sensor only as outlined in this manual. Improper use may damage the unit and/or void the warranty
• Use only new, name brand, lithium non-rechargeable AAA batteries
• Do not use rechargeable batteries
• Do not use zinc blend batteries
• Do not mix new and old batteries
• Do not puncture or damage batteries. Leakage can cause harm on skin contact, and is toxic if ingested
• Do not dispose of batteries in fire as they may explode! Please follow local battery disposal procedures
• While the sensor is waterproof, to ensure optimal operation and lifetime of the sensor, installing the sensor with overhead protection from weather is suggested. Do not immerse the sensor or allow it to be immersed in water
• Do not install or use this device outside of the temperature and humidity range listed in the Environmental section in Specifications, on page 18
• Do not obstruct the opening on the housing
• Do not install or use this device where it will be subjected to high temperatures and/or open flame
• Install or use this device only in clean environments. Extremely dusty or dirty environments may prevent the proper operation of this device, and will void the warranty
• If your Weatherproof Temperature & Humidity Sensor does get dirty, please clean it by wiping it down with a clean, dry cloth. Do not use strong chemicals or detergents, which may discolor or damage the exterior and/or damage the electronics, voiding the warranty
• Donot install or use this device where it will be subjected to physical impacts and/or strong vibration. Physical damage is not covered by the warranty
• Please contact Customer Service before attempting to repair disassemble or modify the device, any of which can void the warranty and permanently damage the device

If you have any difficules installing or using your Weatherproof Temperature & Humidity Sensor, please contact our Customer Service department during business hours:

US Live Tech Support: 1-949-825-5958 M-F 9am – 5pm PST
Email: service@yosmart.com
YoSmart Inc. 17165 Von Karman Avenue, Suite 105, Irvine, CA 92614

Warranty 2 Year Limited Electrical Warranty
YoSmart warrants to the original residenal user of this product that it will be free from defects in materials and workmanship, under normal use, for 2 years from the date of purchase. User must provide a copy of original purchase receipt. This warranty does not cover abuse or misused products or products used in commercial applicaons. This warranty does not apply to Weatherproof Temperature & Humidity sensors that have been improperly installed, modified, put to a use other than designed, or subjected to acts of God (such as floods, lightning, earthquakes, etc.). This warranty is limited to repair or replacement of the Weatherproof Temperature& Humidity sensor only at YoSmart’s sole discreon. YoSmart will NOT be liable for the cost of installing, removing, nor reinstalling this product, nor direct, indirect, or consequenal damages to persons or property resulng from the use of this product. This warranty only covers the cost of replacement parts or replacement units, it does not cover shipping & handling fees
To implement this warranty please give us a call during business hours at 1-949-825-5958, or visit www.yolink.net

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separaon between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio / TV technician for help

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operaon. Any changes or modificaons not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modificaons to this equipment. Such modificaons could void the user’s authority to operate the equipment

FCC RF Radiaon Exposure Statement
This equipment complies with FCC RF radiaon exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operang in conjuncon with any other antenna or transmier
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configuraons. The antennas used for this transmier must be installed to provide a separaon distance of at least 20 cm from all persons and must not be co-located or operang in conjuncon with any other antenna or transmier.”

References

• IFTTT - Automate business & home
• YoLink Products - Longest Range, By Far!
• Support Home – YoLink
• Loading PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>