HotQing A13572 12 Inch All Metal Rain Shower Head with Handheld Instruction Manual
- June 14, 2024
- HotQing
Table of Contents
Shower Head Combo
Instruction Manual
- 12 Inch Shower Head
- 15 Inch Extension Arm
- 60 Inch Shower Hose
- 3 Spray modes
- 180: Height & Angle Adjustable
Thank you for purchasing our products, please read the instructions carefully before using.
About us
HotQing is a brand dedicated to bathtub shower systems for many years. We have
determined that our goal is not only our manufacture, but more important
characteristic is our design. We advocates the coexistence of pragmatism and
decorative-ism in modern sanitary ware products, decorating exquisite life
with exquisite products and creating the concept of “ideal bathroom” in the
future to be dedicated to the Lohas people who are striving for the perfection
of details. Let every customer enjoy life in the shower and fall in love with
the shower.
Our company have a proficient technical team and advanced facility. We have
many years of sales experience in Europe and America, and are equipped with
professional product research and development department, manufacturing and
production system, as well as quality control and after sales service system.
In order to ensure the product’s quality meets European safety standards, our
company began to adopt strict quality management, from the producing of the
first product. We adopted ISO9001 and ISO14000 quality system enhance the
management standard
Notice
-
Please read the instructions carefully or watch the installation video before installation.
(https://www.youtube.com/watch?=HSyKBV_pXck). -
Make sure that there is a sealing ring in the 3-way diverter before installation.
-
When using Teflon tape, please wind it clockwise for 8-10 times, too much or too little will cause leakage.
-
Please use a wrench tool to tighten the 3-way diverter. If it is not tightened, it may cause leakage.
-
Make sure that the wall is clean and dry when installing the shower bracket.
-
After the shower head holder is installed, it is recommended to use it after 4 hours.
-
Our shower head has an automatic pressurization effect, under the action of water pressure, the shower head will jitter instantly when it is turned on or off. It is normal, please rest assured to take a shower.
-
If you have any questions about our products, please feel free to contact us. We will provide you with satisfactory after-sales service within 24 hours.
Cleaning and Maintenance
- Many active ingredients in cleaning agents such as ammonia, detergent powder and toilet cleaners may destroy the coating of the product. For best results, please use mild soap and dry thoroughly with a soft cloth.
- Do not use abrasive cleaning materials on products.
- Please follow the steps below if you experience dirt blocking the flow of the water after some time.
a. Turn on the water and poke the hoks with your fingers to gently to lbosen minerals and release any remaining sediments.
b. Turn off the water, remove the shower head and the mesh washer inside to clean with a small brush.
Installation Video
Please scan the QR code below to watch more videos about HotQing shower head combo installation.
https://www.youtube.com/@HotQingline/videos
Inclusive Parts
1 Shower Hand
1 Combined 3-Way Diverter
6 Washers
1 Shower Head Holder (gift)
1 Handheld Shower| 1 Extension Shower Arm
1 Usual Manual
1 Shower Hose
1 Teflon Tape
2 Wrench tool (gift)
---|---
Installation Instructions
STEP 1: Attach the 3-Way Diverter(Connect with Shower stem)
- Firstly , check whether there is a mesh gasket at the interface of the 3-way diverter connected to the outlet pipe end. (If not, place a spare gasket).
- Then wrap the joint of the outlet pipe clockwise for 8-10 circles of teflon tape.
- Then install the 3-way diverter on the outlet pipe by hand, and adjust the position of the 3-way diverter to the position as shown in the figure below. Finally, use a wrench with a diameter of 23 cm to tighten the 3-way diverter. (Notice: The inaccurate direction of the 3-way diverter will affect the use of the shower head combo.)
STEP 2: Install the Extension Arm(Connect with Diverter)
- Firstly check if there is a mesh spacer at the hexagonal interface A (Image 2) of the shower extension arm. (if not, place a spare gasket).
- Then wrap 8-10 circles of teflon tape clockwise at the water outlet A (Image 1) of the 3-way diverter.
- Then install the shower extension arm to the outlet A (Image 1) of the 3-way diverter by hand. Then use a wrench with a diameter of 24 cm to tighten the shower extension arm.
STEP 3: Install the Rain Shower Head(Connect with Shower Extension Arm)
- Firstly check whether there is a mesh gasket at the interface A (Image 3) of the shower head. (if not, place a spare gasket).
- Then wrap 8-10 circles of teflon tape clockwise at the other end B (Image 2) of the shower extension arm.
- Then install the shower head to the other end B (Image 2) of the shower extension arm by hand. Then use a wrench with a diameter of 22 cm to tighten the shower head.
- Finally, rotate the buttons A-B at both ends of the shower extension arm (Image 2), and adjust the shower head to the position that suits you.
STEP 4: Install the Shower Hose and Handheld Shower Head (Connect with Diverter)
- Firstly make sure the washer is placed in A & B (Image 3)head connector (Can also not add washer).
- Connect the Ahead (Image 3) of the shower hose to the B interface (Image 1) of the 3-way diverter.
- Connect the B head (Image 3) of the shower hose to the handheld shower head.
- Finally, insert the handheld shower head (Image 4) into the shower holder of the 3-way diverter and adjust it to a suitable position.
STEP 5: Install the Shower head Holder
-
firstly clean and dry the wall. ( Notice: material of the wall)
-
Tear off the protective film on the back of the shower head holder, then stick the shower head hoker on the wall and press it firmly. ( Notice: After the shower head holder are installed, it is recommended to use it after 4 hours.)
Customer Service
Thank you for bought our bathroom products from our store.
At the same time, thank you for your support and understanding of our work,
and thank you for your trust and recognition of our products.
As a professional seller on Amazon, we always do our best to serve customers
and do hope every customer can get what they want with happy shopping
experience, so we really cherish your shopping experience.
If you are satisfied with our service, please let more customers know your
shopping experience and let more customers who need our products better
understand We will be very grateful for our products to help them buy the
products they want.
If there is any product problem, please feel free to contact us. And it’s our
responsibility to offer the best customer service to you. our after-sales
service team will reply within 24 hours.
If you have any problems, we could send a replacement for free or make a
refund for you. Our friendly customer service team will do our best to put a
smile back on your face.
[email protected]
wlqvxb2008
nerdonshowerhead
www.hotqing.com
+(86) 15307970670
@HotQing Xie
@wlqvxb2008