HotQing Wall Mount High Pressure Rain Shower Head Instruction Manual

HotQing Wall Mount High-Pressure Rain Shower Head

Thank you for purchasing our products, please read the instructions carefully before using.

About Us

• HotQing has been a brand dedicated to bathtub shower systems for many years. We have determined that our goal is not only our manufacture but more importantly characteristic is our design. We advocate the coexistence of pragmatism and decorativeism in modern sanitary ware products, decorating exquisite life with exquisite products and creating the concept of “ideal bathroom” in the future to be dedicated to the Lohas people who are striving for the perfection of details. Let every customer enjoy life in the shower and fall in love with the shower.
• Our company has a proficient technical team and advanced facility. We have many years of sales experience in Europe and America and are equipped with a professional product research and development department, manufacturing and production system, as well as quality control and after-sales service system. In order to ensure the product’s quality meets United States and European safety standards, our company began to adopt strict quality management, from the production of the first product. We adopted ISO9001 and ISO14000 quality systems to enhance the management standard. Our product is produced from the highest quality Brass material without any impurities or anything that is harmful to the health. We provide a 15-year worry-free warranty, a PDF manual, and a fast online operational guide. Please read the manual carefully before use. Any problems or are not satisfied with our shower systems, please contact us, and we will do our best to help you solve the problem.

Installation Precautions

NOTICE: Please scan the QR code below to watch more videos about HotQing shower system installation.

1. When you open the product packaging, please check the product and accessories at first. If there is any discrepancy, please contact the company or our distributor immediately.
2. The hot and cold water supply pipe of the faucet must be properly connected. When facing the front of the faucet, the hot water supply is on the left and cold water supply is on the right. Incorrect connection will cause permanent damage to the cartridge.
3. If the accessories to be changed without affecting the use, we will not make a prior notice.
4. The impurities in the water supply pipe must be cleared before installation to avoid blockage.
5. The water pressure of the faucet is 0.05MPa-1.0MPa (including cold water and hot water pressure).

Applicable water temperature range: 39℉ – 194℉

Preparation Before Installation

1. Please read the installation manual carefully before installation.
2. Installation work must be performed by a professional installer. Installation Tool

Package List

WARNING: Choking hazard. Please keep all small parts and plastic bags out of the reach of children.

Dual Function Shower System

1. Before you start, prepare the wall for installation
   • (The depth shown here is for reference only; please determine actual depth according to the thickness of the bathroom tiles. )

Determine the position of the valve

• Wipe off dirt and impurities from the insides of all pipes and fittings.
• Wrap enough Teflon tape
• NOTICE: Please ensure that there are no impurities in the pipe and fittings all the time.
• (The depth shown here is for reference only; please determine the actual depth according to the thickness of the bathroom tiles. )
• NOTICE: Create enough space for the outlet of the recessed water pipe, the shower wall, and the lower nozzle connector.

A: Wall-Mounted Installation

• Recommend using copper drop ear pipe elbow(1/2-14 NPT)
• This product does not include this part

B: Ceiling Mounted Installation

Before tiling

• After laying the tiles
• Valve installed too deep-incorrect installation Correct installation
• Before tiling
  • After laying the tiles
• The valve was installed too deep- incorrect installation
  • Correct installation

Test Work (Very Important)

• Check the water pressure and water temperature to prevent blockage and leakage. plastic cap and simp install the handotective

1. Before the test work, remove the protective plastic cap and simply install the handle.
2. During the test, open the water supply system, flush the two outlet pipes by operating the handle, and test whether the water pressure is appropriate.
   • Operating the handle to close the water and test for pressure resistance and tightness to ensure no leaks.
   • NOTICE: The shower valve must be connected to both hot and cold water pipes. As a safety feature, the valve will only work if both pipes are connected properly
3. After the test is completed, plug all the pipe outlets with a plastic stopper and open the faucet. Check the connection of the upper and lower outlets of the outlet pipe for tightness and line pressure. Make sure there are no leaks.

Tiles

(If the tiles are too thick, there will not be enough space to install plate® knob@and handle10)

• A: Wall-Mounted Installation
• B: Ceiling Mounted Installation

Install shower bracket

Install hand-held shower and hose

Install Shower Arm and Rain Shower Head

Warning: When using a wrench to install the shower arm, please use a cloth or plastic protective cover to protect it, otherwise the shower arm may be damaged.

• B. Install Ceiling Shower Arm and Rain Shower Head
  • Longer thread for ceiling mount Shorter thread for rain shower head

Finished

Please Note Before Filling the Wall

1. All inlet and outlet pipes must be flushed to prevent obstruction of pipes.
2. Check the pipe connection to ensure no leakage.
3. Test the pressure and tightness of the water pipe.
4. If it is not the bathroom renovation, the shower system is directly installed to the existing pipe, please test whether the fitting length is suitable for your existing pipe.

Symptom

1. No flow or low flow
2. The water pressure in the water supply system is too low -increase the water supply pressure, or install a booster pump.
3. Inlet pipes, outlet pipes, or other pipes are blocked, resulting in low water flow – please flush the pipes or contact the plumber for disposal (please follow the installation steps above to clean the pipes in advance).
4. Showerhead, hose, and thermostatic valve inlet/outlet blockage, resulting in low water flow – regular cleaning to prevent impurities from clogging.
5. The filter inlet is partially blocked. – Clean or repaint and flush the tubing before reinstalling.
6. Correctly use the handle to adjust the water temperature, If the water is too cold or too hot – check the water pressure of the water supply system, and increase the water flow or pressure through the booster pump, if the water heater fails, you need to contact the water heater manufacturer to solve.
7. The distance of the water jet is too short – you need to increase the water pressure (check and adjust the water pressure in the water supply system, or install a booster pump), or pick up the hand shower.
8. No hot or cold water reaches the shower valve. – Check the cold water and hot water inlet pipes (if the hot or cold supply fails, the valve will close).
9. Incorrect installation, resulting in improper inlet pressure

  * please refer to the Installation Requirements section, to ensure that the inlet pressure maintained is normal/balanced and sufficient.

2. Water temperature change
   The water temperature suddenly becomes high or low during the shower. -A large amount of cold water or hot water is taken from other places, causing the water pressure to change. Do not use other water outlets during the shower or check if the water heater is working properly.

3. Shower head dripping

4. The dripping water is normal if in a short time.- You would try to change the angle of the shower head which may solve this problem.

5. If it is a long period of dripping, that may be because the shower control valve has not been completely closed. – Remove the shower control valve assembly and check if the shower valve is blocked.

6. The flow control valve seal is damaged. – Check the status of the flow control valve and replace it as needed.

Clean and Maintain Product

How to clean shower head nozzles

1. Just rub the nozzles with your finger or a toothbrush to loosen any deposits, and then run hot water for a few minutes.
2. Put the shower head into a pot. Consider using a smaller container that just about fits the shower head; this way, you will use less vinegar. You can also use a small bucket or plastic bin. Fill the pot with enough white vinegar to cover the shower head. The acids in the vinegar will help dissolve the white mineral deposits on the shower head. Let the shower head soak in the vinegar for 30 minutes. The more soiled the shower head is, the longer you will have to leave it in the vinegar.

Maintain Chrome and Brushed Nickel finished product

1. To clean the products all you need is a high-quality microfiber cloth.
2. Apply a high-quality chrome cleaner to a clean cotton cloth, and wipe over the chrome. Leave as per product instructions, and then rinse with warm water. Gently remove any product residue using a dry chamois or paper towel.
3. How to Clean Chrome
   Home-made Solutions In addition to professional products, home-spun solutions also have their place when breathing new life into dull chrome. Try this shortcut to achieving chrome cleaning nirvana: Detergent and warm water! Submerge chrome-plated objects including pots and pans in a sink full of warm water. Add a half-cup of a high-quality washing-up detergent and rub gently with a soft cotton cloth to avoid scratching the chrome. Use a scented detergent to leave kitchenware smelling fresh, as well as spotless.

Guarantee

• Thank you for buying our bathroom products from our store. At the same time, thank you for your support and understanding of our work, and thank you for your trust and recognition of our products.
• As a professional seller on Amazon, we always do our best to serve customers and do hope every customer can get what they want with a happy shopping experience, so we really cherish your shopping experience.
• If you are satisfied with our service, please let more customers know your shopping experience and let more customers who need our products better understand We will be very grateful for our products to help them buy the products they want.
• If there is any product problem, please feel free to contact us. And it’s our responsibility to offer the best customer service to you. our after-sales service team will reply within 24 hours. If you have any problems, we could send a replacement for free or make a refund for you. Our friendly customer service team will do our best to put a smile back on your face.
• Friendly customer service team will do our best to put a smile back on your face.
• nerdon_tech@outlook.com
• wlqvxb2008
• nerdonshowerhead
• www.hotqing.com
• +(86)15307970670
• @HotQing Xie
• @wlqvxb2008

Documents / Resources

| HotQing Wall Mount High Pressure Rain Shower Head [pdf] Instruction Manual
Wall Mount High Pressure Rain Shower Head, Wall Mount, High Pressure Rain Shower Head, Pressure Rain Shower Head, Rain Shower Head, Shower Head
---|---

References

• Home - HotQing Shower Head Combo, Upgrade Bathroom, Enjoy Shower Life !

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>