Kraus KPF-2654 Oletto Single Handle Pull Down Kitchen Faucet Instruction Manual

Kraus KPF-2654 Oletto Single Handle Pull Down Kitchen Faucet

Specifications

• Product Name: OlettoTM Single Handle Pull Down Kitchen Faucet
• Model Number: KPF-2654
• Dimensions: 11 1/4″ (285mm) height, 4″ (101mm) width, 3 3/4″(95mm) spout reach, 7 1/2″ (190mm) spout height, 17 3/8″ (441mm) hose reach, 8 3/4″ (222mm) base width
• Connection: 3/8″
• Tools Required: Adjustable Wrench, Phillips Screwdriver, Silicone Sealant, Safety Goggles, Pipe Tape

Congratulations on the purchase of your new Kraus plumbing fixture

• Please keep the box and packaging materials until your product is
• completely installed. If you have any questions, require technical assistance or have any problems with your product:

DO NOT RETURN TO STORE

• Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com
• Have the model number available and retain a copy of your receipt with purchase date for reference.
• If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Prior to Installation

• Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
• Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation.
• Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone.
• Flush angle stops to release any debris prior to installation.
• Pre-drilled hole size requirement: 1 3/8″ (min)
• Max countertop thickness: 2 1/4”

For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or Customerservice@kraususa.com

Care & Maintenance

To keep the product clean & shining, follow the steps below:

1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary

This installation manual is subject to change without further notice.

Tools Required

Diagram and Parts List

1. Spray Head
2. Faucet Body
3. O-Ring
4. Waterlines
5. Quick Connector 6A. Metal Washer
6. B. Mounting Nut 6C. Mounting Screws
7. Hex Wrench
8. Weight
9. Spray Hose

Faucet Dimensions

Installer Tip

Shut off main water supply before installing new faucet.

1. Step 1. Installing the O-Ring

2. Step 2. Install faucet and mounting hardware
   Insert faucet body (2) into the hole in the sink or countertop. Install mounting hardware (6A, B & C) from underneath the countertop.

3. Step 3. Secure mounting hardware
   Adjust direction of faucet body (2) so that handle is on right side of faucet. Tighten mounting nut (6B) until snug. Tighten mounting screws (6C) to nut with Phillips screwdriver until snug.

4. Step 4. Attach spray hose and counterweight
   Connect the spray hose (9) to quick connector outlet (5) attached to the supply line. Install the weight (8) on the spray hose where it is marked.

5. Step 5. Connect waterlines
   Connect hot and cold copper lines (4) to angle stops. Tighten both ends of waterlines with a wrench until snug. Turn on hot and cold angle stops and check for leaks.
   NOTE : Please make sure filter washers are installed before connecting to the main valve.

6. Step 6. Flush spray hose
   Remove spray head (1) from spray hose. Hold tip of spray hose. Turn faucet on and let the water run for 60 seconds to flush any debris.

7. Step 7. Check for leaks
   Check for leaks at the connections. Retighten if necessary.
   

Maintenance – Cartridge Replacement

1. Step 1: Remove the button located at the top of the catridge cover. Loosen the set screw with a hex wrench. Remove the handle and unscrew cartridge cover by hand.

2. Step 2: Unscrew the locking nut with a hexagon socket wrench. Remove the ceramic disc cartridge.

3. Step 3: Place the new cartridge in the handle seat. Secure the cartridge with the locking nut and assemble the handle.
   

Replacement Parts

• Denotes spray hose assembly color options: Spray hose assembly color options: Black hose w/ Matte Black connector (BLMB),
• Gray hose with Chrome connector (GRCH), Gray hose with Spot-Free Stainless connector (GRSFS)
• Denotes faucet component color options:
• CH – Chrome
• SFS – Spot Free Stainless Steel MB – Matte Black
• BG – Brushed Gold
• BL – Black
• WH – White
• GR- Grey

7. Cartridge Cover &

O-ring

| CH, SFS, MB, BG**| KP06251
8. Cartridge Nut| | KP06252
9. Cartridge| | KP06100
10. Base O-Ring| | KP06062
11. Rubber Washer| | KP06041
12. Metal Washer| | KP06028
13. Mounting Nut| | KP06067
14. Mounting Screws| | KP06068
15. Protective Sleeve| | KP06161
16. Quick Connector

Assembly

| | KP06173
17. Flow Regulator

Assembly (1.8GPM)

| WH**| KP06174
18. EZ-Weight| | KP06015
19. Hex Wrench 2.5mm| | KP06050
20. Mounting hardware

kit (includes KP06041, KP06028, KP06067,

KP06068)

| | KP06200
21. Filter Washers| | KP06185

Troubleshooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

cartridge cover by hand. Tighten locking nut with an adjustable wrench.
Water does not shut off completely| Cartridge may need to be adjusted or replaced.|

• Loosen set screw with hex wrench. Remove handle and pull out cartridge cover by hand. Unscrew locking nut with an adjustable wrench. Remove ceramic disc cartridge.
• Check for cracks, and if O-ring is seated correctly. Reseat cartridge.

Leaking between spray head and the hose| Spray head may be loose or washer is not seated correctly in the hose connection.| Tighten spray head by hand until snug. Make sure washer is seated correctly.
Hose does not retract| Weight may be installed incorrectly.| Readjust weight on hose.
Low flow| Aerator may be clogged
The screen filter in the hose connectors is dirty.|

• Unscrew aerator with aerator key. Hold tip of spray head and turn on water to flush debris.
• Turn off the water supply at water valve and unscrew the hose connectors from water supply lines. Clean the screen in the water lines with hot water, removing any debris or calcium build up.

Codes/Standards Applicable

Faucet – Lifetime Limited Warranty

• Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the Faucet when purchased from an authorized Kraus dealer and in the location of original installation. This warranty is non-transferable.
• Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.
• Kraus warrants the Faucet’s sprayhead assembly (including the engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year from the date of purchase.
• Kraus warrants the Faucet’s cartridge to be free from defects in material and workmanship under normal usage for a period of five (5) years from the date of purchase.
• Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus.

Commercial Warranty

• Kraus USA Plumbing, LLC (“Kraus”) warrants its Products for a period of one (1) year to commercial purchasers of Products used in industrial, commercial and business applications.

Care and Cleaning Instructions

• Certain cleaning products may cause damage to a Product’s finish and use of the following on the Product will void this warranty:
• Abrasive cleaners such as powders, bleach, ammonia, alcohol or chorine
• Abrasive pads, steel wool or wire brushes

What is Not Covered

• This warranty does not cover Products that were discontinued when purchased or display Products, whether such Products were purchased at discount outlets, unauthorized dealers, and/or sold on clearance.
• This warranty does not cover any free gifts included with purchase.
• This warranty does not cover damage resulting from neglect, misuse (including use for an unintended application), abuse, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance, alteration of the Product, or failure to follow care, cleaning or installation instructions enclosed with your Product. Kraus recommends that all Kraus Products be installed by a fully licensed and insured trade professional with experience in the installation of bathroom and/or kitchen manufactured goods.

How to Make a Warranty Claim

• If you are a consumer purchaser, please contact a Kraus Customer Service Representative at: Customerservice@kraususa.com
• If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at: Proservice@kraususa.com
• If you are an authorized partner, please contact a Partner Support Representative at: Partnersupport@kraususa.com
• In requesting warranty service, please be ready to provide your proof of purchase and a description of the problem. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

Limitation on Duration of Implied Warranties

• Please note that some states/provinces (including Quebec) do not allow limitations on how long an implied warranty lasts, so the below limitations may not apply to you.
• TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE DURATION OF THIS WARRANTY, WHICHEVER IS SHORTER.

Limitation of Special, Incidental or Consequential Damages

• Please note that some states/provinces (including Quebec) do not allow the exclusion or limitation of special, incidental or consequential damages, so the below limitations and exclusions may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND KRAUS USA PLUMBING, LLC SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.
• This warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/province.

Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance

References

• Kraus | Kitchen and Bathroom | Sinks, Faucets, and Accessories
• Care & Maintenance | Well-crafted products | Light maintenance.
• Kraus USA Self Help

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>