Creatuis 9191 Power Lift Chair User Manual

Lift chair series-9191
User Manual

9191 Power Lift Chair

We hope this chair brings convenience and comfort to your daily life.
If you have any ideas on how we can improve the chair to provide a better user experience, please send them to us via email. Your suggestions will help us grow and produce more professional products that better serve our customers.
Thank you for your help! |
Welcome
Thank you for choosing our product!
We hope our product meets or exceeds your expectations.
Should you have any questions, feel free to contact the seller including your contact information (name, phone number).
Our customer representative will contact you soon.
We suggest that you keep this manual in a safe place. It contains essential information regarding the operation of your chair.

General Warnings

Caution!

The rise/recline of the footrest is supported by a scissor mechanism. Do not leave children or pets unsupervised or , directly around the chair. There is a potential risk of trapping by the mechanism. Take care to avoid trapping clothing, blankets, fingers etc.Do not sit on the armrests or footrest,the mechanism may be damaged by putting too much weight on it. Make sure there is enough distance between the wall and the chair back BEFORE fully reclining. Reclinging the chair too close to the walk will damage the chair. We suggest you keep 20 inches between the wall and your chair.

Specific Warnings

• Maximum loading capacity 300 Ibs!
• Ensure that only one person sits in the chair at a time.
• Do not route any cables under the chair or through any moving part of the chair. There is a risk of the cable being damaged which could cause an electric shack.
• Do not use the chair with an electric blanket.
• Do not dry wet areas with hair dryers, etc.
• Do not over expose the leather to sunlight.
• Do not leave the chair in the recline position.
• Do not move the chair while the power cable is connected to the outlet.
• Keep all electronics away from moisture and extreme tempera- tures.
• If the chair becomes damaged, unplug and contact the seller for service.
• Unplug the base before cleaning.
• Avoid getting liquid on to the electrical system.
• When the chair is in the raised position,do not sit down heavily onto it, but, lower yourself gently. Severe impact could damage the mechanism.
• Ensure that the footrest does not catch on the carpet.
• Be careful while using sharp objects such as needles,pins,scis- sors, etc.
• Do not drag the chair when moving or lifting as this may cause damage to the lifting mechanism and trap the cables.
• Do not leave the chair in the UP or DOWN position when not in use.
• We do advise that the chair checked once every 12 months.
• Only use authorized accessories for the chair.

Parts

The first box contains the following parts:
A: Accessory package This package is inside the chair base and contains

1. Motor power cord
2. Transformer
3. A wrench
4. Two castors

B:Chair base&controller C: Pillow
The second box contains the following parts: D. Right ear
E: Right arm&Left arm F: Chair back

Assembly Steps

Step1.Level the chair base Step 2.Assemble the chair hands.-a. Align the locking clip .
-b. Push the arm down evenly with both hands to the bottom.
Step 3. Arrange the position of controller.-a. Connect power cord and press this e button to lift chair in the highest position as show above.
-b. Customer can choose to place the controller on the left or right side of the chair according to their preference as show below.Step 4. Lock castors on rear of chair..Step 5. Assemble the chair back —a. Align the locking clip.
—b. Slide the backrest into the chair base.
Step 6. Assemble the chair ears.—a. Align the locking clip.
—b. Press the ear evenly with two hands to bottom.
Step 7. Connect cords.a. Connect the lumbar support cords as is shown above.b.Connect power cord&transformer&extension cord as is shown above.
(power cord and transformer have been placed in the accessory package which had been fied inside the chair base!)

Remote control

a) Lifts/Closes backrest.
b) Lowers/Opens backrest.
c) Opens lumbar support.
d) Closes lumbar support.
e) Lowers/Closes footrest and lifts chair.
f) Lifts/Opens footrest and lowers chair. Warm tips
This pillow is recommended when lying down on this chair it will help to support your body and make you more comfortable during sleep.

Cleaning

Follow these four quick steps to clean a breathable leather /fabric couch:

1. .Wipe down the chair using a microfibre cloth
2. Wipe over using a damp cloth
3. Use eco-friendly soap
4. Wipe over using a dry rag.

General trouble-shooting guide.

How can I ask for help when something goes wrong with my product？
Click contact link,send us an email,please include:

1.  Brief problem description.
2. Contact info. (phone number,email)
3. Video or pictures demonstrating problem.

What if my lift chair does not work at all?

1. Make sure outlet is turn on and has electricty.
2. Ensure chair plug in outlet.
3. Make sure there is no cable damages.

The footrest cannot be fully raised.
The motor that controls the footrest needs to be replaced(the motor can be replaced very easily , the seller will provide an installaton video if needed.)
Noises
All motors hum and vibrate slightly. This is normal. There are many moving parts and you may hear noises when operating the chair. However, if the noise is excessive, contact a customer service representative.

Thank you for choosing our product!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>