ARROW EU-25541-HP Pressure Injectable One-Lumen PICC Instruction Manual
- June 4, 2024
- Arrow
Table of Contents
EU-25541-HP Pressure Injectable One-Lumen PICC
Instruction Manual
Pressure Injectable One-Lumen PICC
Contents:
1: One Lumen Catheter: 4 Fr. (1.45 mm OD) x 55 cm, Pressure Injectable, TPort
Connector, Blue FlexTip®, Contamination Guard and Placement Wire
1: GlideThruTM Peel-Away Sheath: 4 Fr. x 2-3/4″ (7 cm) Radiopaque over 4 Fr.
Dilator
1: Spring-Wire Guide, Nitinol, Marked: .018″ (0.46 mm) dia. x 17-3/4″ (45 cm)
(Straight Soft Tip on One End – Straight Stiff Tip on Other) with Arrow
Advancer
1: Introducer Needle: Echogenic 21 Ga. x 2-3/4″ (7 cm) TW
1: Syringe: 10 mL Luer-Lock
1: SecondSiteTM Adjustable Hub: Catheter Clamp
1: SecondSiteTM Adjustable Hub: Fastener
1: SharpsAway® II Locking Disposal Cup
1: Catheter Trimmer
1: Safety Scalpel: #11
1: Patient ID Card
1: Patient Information Booklet
1: Chart Sticker
1: Paper Tape Measure
1: Tourniquet
1: Dressing: GRIP-LOK®1 Catheter Fixation Device
1: Valve: MicroCLAVE®2 Neutral Displacement Connector
1A registered trademark of TIDI.
2A registered trademark of ICU Medical, Inc.
All components are CE 2797 unless otherwise noted.
Warning: Read all package insert warnings, precautions, and
instructions prior to use. Failure to do so may result in severe patient
injury or death. www.teleflex.com/IFU Not made
with natural rubber latex. Fluid path components are non-pyrogenic.
Contraindications: The Pressure Injectable PICC is contraindicated
wherever there is the presence of device-related infections or the presence of
thrombosis in the intended insertion vessel or catheter pathway. A clinical
assessment of the patient must be completed to ensure no contraindications
exist.
Lumen| Priming Volume*
(mL)| Gravity Flow Rate
(mL/hr)| Pump Flow Rate
(mL/hr)| MAX Pressure Injection
Flow Rate** (mL/sec)
---|---|---|---|---
Distal (18 Ga.)| 0.48| 436| 4075| 4
- Priming volumes are approximate and are done without accessories. Flow rate values are approximate and are determined using deionized water at 100 cm head height. Pump flow rates are determined at a maximum pump pressure of 10 PSIG and represent approximate flow capabilities.
Pressure injection flow rates are determined at the injector pressure setting of 300 psi maximum using media of 11.8 centipoise viscosity, with 152 cm pressure tubing.
Pressure Injectable One-Lumen PICC**
EU Authorized Representative and Importer:
Teleflex Medical IDA Business and
** Technology Park Dublin Road, Athlone
2729** Co. Westmeath, Ireland
Arrow International LLC
A subsidiary of Teleflex Incorporated
3015 Carrington Mill Blvd.
Morrisville, NC 27560 USA
www.telelxex.com
LBL056481 R00 (2021-06)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>