TESLONG MS450S Pole Inspection Camera User Manual
- June 14, 2024
- TESLONG
Table of Contents
TESLONG MS450S Pole Inspection Camera
Product Manual
- MS450-NTC is a high-performance industrial endoscope with a 4.5-inch high definition color screen.
- It is ergonomically designed so that users can control the main buttons with just 1 hand.
- The snapshot and recording functions are supported; photos and videos can be saved on a TF memory card ( Micro-SD card).
- This product is equipped with LED-assisted illumination and a small-diameter HD camera.
- The camera uses a high-sensitivity chip to help this product perform in the dark.
- The camera probe is interchangeable, it can connect to different probes with different sizes, dimensions, angles, or focal lengths.
- Warning: This product is an industrial endoscope camera and is not intended for medical use or human examination.
Safety and Maintenance
- DO NOT violently hit the camera probe, DO NOT imprudently pull the cable.
- When used in an environment with sharp objects, be extra careful to prevent the probe’s waterproof protective layer from being scratched during usage.
- The camera probe materials are not resistant to high temperatures. When checking the vehicle engine, please ensure that the temperature inside the engine is at the normal temperature.
- This product is not suitable for people with limited physical, sensory or mental capabilities.
- DO NOT allow children to touch or operate this device.
- In case the device is damaged, DO NOT disassemble it by yourself. Please contact the seller or the agent where you bought it to get a repair service.
Battery Description
- Please use a 5V household charger that meets safety regulations to charge this device.
- If you have not used the device for a long time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive battery discharge.
Functions
- Camera probe connector.
- Snap: Take photos/start or end video recording.
- Light control: To adjust the LEDs brightness of the camera.
- Up and down selection button / Zoom in / Rotate 180°.
- Mode: Take Photos, video recording & playback.
- Enter: Confirm selection/freeze screen.
- Settings: Enter or exit the settings menu.
- Power: Press and hold for a few seconds to turn ON/OFF.
- TF card slot
- Charging port
- Camera probe lock(Press this button to unlock and pull out the camera probe)
- Speaker
- Installation hole of Screen brake
- Reset
- Microphone
Take Photos
- Press and press to switch to the take photos to take a photo.
Video Recording
- Press to switch to video recording mode, and press to start recording.
Instructions
- Press & hold the Power button for a few seconds to turn the ON/OFF device.
- Notice: Press this button to switch the front and side lenses. When connecting a dual-lens camera probe.
- Press this button then pull out the Type-C plug of the probe from the monitor.
- Note: Connect the camera probe then turn on the device. Restart the device if replacing the camera probe.
- The device is equipped with a TF memory card(inserted]. Gently press to eject the card.
How to insert TF card
- Power off the device first before inserting TF card.
- Make sure the direction and the front and back sides are correct when inserting the TF card.
- Do not use excessive pressure when inserting or removing the TF card to prevent damage to the card slot structure.
- You can only take photos or record videos when a TF card is inserted into the device.
Language Settings
- The default language is English, and the system supports English, Chinese, and German. French, Spanish, Italian, Russian, and Japanese. Setting path:
- Press the button twice to enter the settings page.
- Select the second item (Language).
- Press up and down to select the language you need.
- Pressm to save your choice.
Copy photo and video files to computer
- You can use a TF card reader to copy data directly or use a type-C cable to connect to a computer for copying.
Specification Parameters
Screen
- Screen: 4.5-inch HD Display
- Screen resolution(Pixels): 854×480
- Support probe resolution(Pixels): 1.0 Megapixel HD
- Image Capturing resolution(Pixels): 1920×1080
- Video Recording Resolution(Pixels): 1280×720
- Port: Type-C charging port, TF memory card slot
Camera
Others
- Operating Temperature: 32° F to 113°F (O”C to 45°C)
- Power Source: 2500mAh Lithium Battery
- Working Time: 3-4 hours
- Charging Time: 3-4 hours
Packaging
Monitor, camera probe. Type-C charging cable, user manual, screen bracket
Accessories-pick up hock, magnet, mirror (Note: 3.9mm NO accessories)
Customer Service
- Please contact us if you have any product quality problems, we would love to hear from you.
- Manufacturer Service
- support@teslong.com. info@teslong.com.
- 1-877-899-8809 (US) (Mon-Fri 8:00 AM-5:00 PM PST)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>