OSP BP-4215-201W Queen Headboard Instruction Manual

BP-4215-201W
QUEEN HEADBOARD
ASSEMBLY INSTRUCTIONS

IF PARTS ARE MISSING OR DAMAGED, DO NOT RETURN TO STORE
To order missing or replacement parts, contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. – 3:30 p.m. Pacific Time.

FURNITURE CARE

• Dust with a soft cloth following the grain pattern of the wood.
• Dust often to remove the everyday abrasive particles from the wood surfaces.
• Before dusting, moisten cloth lightly with a spray product.
• Wood finishes also benefit from an occasional polishing.

WARNING

1. Do not use this product unless all screws and bolts are securely tightened.
2. Check that all screws and bolts are tight every three months or as needed.
3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. Intended for residential use only.

LIMITED WARRANTY

OSP Home Furnishings® warrants to the original purchaser that this product will be free from defects in material and workmanship as described below. Home Furnishings® will repair or replace, at its option, without charge to the original purchaser only, defective products or parts for one (1) year from the date of purchase. Replacement parts can only be supplied if parts are available. Items. out of production may be unavailable. This warranty shall be effective for the applicable time period beginning from the date of purchase as shown on your original sales receipt. This warranty is your sole remedy for product defects and excludes defects due to or arising in connection with product abuse or misuse, use modification of, or attachments to the product, and products or parts not used, maintained, or installed in accordance with the company’s installation, maintenance and/or applicable guidelines. There are no other warranties, express or implied, other than those specifically described, including without limitation any implied  warranty of merchantability or of fitness for a particular purpose. OSP Home Furnishings® will not be responsible for incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Our quality standards are among the highest in the industry. Sometimes, no matter how hard we  try, there are times when parts are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday  through Friday 8:00 a.m. – 3:30 p.m. Pacific Time. To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization. At its option OSP Home Furnishings® will: (a) Supply compatible components of current manufacture. (b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components still in warranty will be paid by OSP Home Furnishings®.

HARDWARE LIST

PARTS LIST

1. Attach Camlock Bolts (hh) to Headboard (C), Left & Right Legs (D) & (E).
2. Attach Top Panel (A) to Crown (B) using Wood Screws (aa).
3. • Attach Left & Right Legs (D) & (E) to Upper & Lower Stretcher (G) & (H) using Camlocks (ii).

• Attach Upper Stretcher (G) to Headboard (C) using Camlocks (ii). 4. Attach Leg Supports (F) to unit from Step 3 using Spring Washers (ff), Flat Washers (gg) and Bolts (cc).
  Tighten all bolts using Allen Key (jj).

  5. Attach Threaded Rods (bb) to unit from Step 2.
  6. Attach unit from Step 4 to unit from Step 5 using Square Washers (ee) and Nuts (dd). Tighten all nuts using Wrench (kk).

BP-4215-11W
NIGHT STAND
ASSEMBLY INSTRUCTIONS

IF PARTS ARE MISSING OR DAMAGED, DO NOT RETURN TO STORE
To order missing or replacement parts, contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. – 3:30 p.m. Pacific Time.
FURNITURE CARE:

• Dust with a soft cloth following the grain pattern of the wood.
• Dust often to remove the everyday abrasive particles from the wood surfaces.
• Before dusting, moisten cloth lightly with a spray product.
• Wood finishes also benefit from an occasional polishing.

WARNING

1. Do not use this product unless all screws and bolts are securely tightened.
2. Check that all screws and bolts are tight every three months or as needed.
3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. Intended for residential use only.

LIMITED WARRANTY
OSP Home Furnishings® warrants to the original purchaser that this product will be free from defects in material and workmanship as described below. Home Furnishings® will repair or replace, at its option, without charge to the original purchaser only, defective products or parts for one (1) year from the date of purchase. Replacement parts can only be supplied if parts are available. Items. out of production may be unavailable. This warranty shall be effective for the applicable time period beginning from the date of purchase as shown on your original sales receipt. This warranty is your sole remedy for product defects and excludes defects due to or arising in connection with product abuse or misuse, use modification of, or attachments to the product, and products or parts not used, maintained, or installed in accordance with the company’s installation, maintenance and/or applicable guidelines. There are no other warranties, express or implied, other than those specifically described, including without limitation any implied warranty of merchantability or of fitness for a particular purpose. OSP Home Furnishings® will not be responsible for incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday
through Friday 8:00 a.m. – 3:30 p.m. Pacific Time. To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization. At its option OSP Home Furnishings® will: (a) Supply compatible components of current manufacture. (b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components still in warranty will be paid by OSP Home Furnishings®.
HARDWARE LIST

PARTS LIST

1. Attach Camlock Bolts (gg) to Left and Right Assembly (B) and (C).
2. Attach Front & Back Apron (E) & (F), Front Rail (G), Front & Back Bottom Rail (H) & (1) to Left Assembly (B) using Camlocks (hh).
3. Attach Right Assembly (C) to unit using Camlocks (hh).
4. Attach Wood Screws (cc) to Front Bottom Rail (H).
5. Attach Top Panel (A) to unit using Wood Screws (aa) & (bb).
6. • Slide Dust Panels (J) into the groove

• Attach Wood Screws (dd) to lock Dust Panels (J). 7. * Attach Tray Handle (i) to Tray (D) using Tray Bolt (ii).

• Slide Tray (D) into unit.

• Attach Stopper Bolt (kk) through Tray’s hole as a stopper. 8. Attach Back Panel (K) to unit using Wood Screws (dd).
  Note: Attach Wood Screw (dd) to pre-bored holes first.

  9. • Attach Drawer Handle (jj) to Drawer Front (L) using Drawer Bolts (jj).

• Attach Drawer Left and Right (M) and (N) to Drawer Back (O) using Wood Screws (ee).

• Slide Drawer Base (P) into the groove.

• Attach Drawer Front (L) to Drawer Left and Right Side (M) and (N) using Wood Screws (ee).

• Do the same step to the next Drawer. 10. * Slide the drawers into unit

• Adjust the adjuster that has already been assembled to the legs to stabilize your Nightstand.

I. IF THE DRAWER DOES NOT ALIGN

II.IF THE DRAWER ALREADY ALIGNS

Pull out drawer slowly. Lock the drawer front panel into position using Wood Screws (ff).

Loosen slight the upper screws

Insert the drawer into the main body, then adjust the drawer front panel left or right and up or down, until the drawer gaps look proportional.

Pull the drawer open slowly and tighten the upper screws. Make sure the front panel does not move and lock the drawer front panel into position using Wood Screws (ff).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>