FIAMMA 98655A712 Adapter Kit Installation Guide
- July 20, 2024
- FIAMMA
Table of Contents
FIAMMA 98655A712 Adapter Kit
Product Specifications:
- Brand : FIAMMASTORE
- Model : F43van
- Kit : VW T5/T6 CALIFORNIA
- Dimensions : 63 mm x 129 mm x 172 mm
- Package Contents:
- A – 1x
- B – 1x
- C – 6.4×12.5×1.6 10x
- D – M6x12 4x
- E – M6x16 6x
- F – M6 4x
- G – M5x14 2x
- H – M5 2x
- I – 2x
Product Usage Instructions
Installation Instructions for Brackets:
Make sure to follow these steps for proper installation of the brackets:
- Check that nothing has been damaged during transport.
- If in doubt, contact the dealer for assistance.
- Installation should be done by qualified personnel and I compliance with local regulations.
Important Installation Notes:
Ensure proper alignment of brackets to avoid future issues. The awning
installation requires perfect alignment of the adapter to the vehicle wall.
Awning Positioning:
Before tightening the screws, ensure the awning position allows for the
complete opening of the rear door.
Maintenance:
Periodically check the brackets to ensure they are firmly attached, especially
after installation.
Please consult the website for instructions in the languages:
NL-SV-DA-NO-FI-PT
DIMENSION
PARTS
TOOLS REQUIRED
Check that nothing has been damaged or deformed during transport. In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. We recommend that the installation is carried out by qualified personnel and in compliance with current local regulations.
ATTENTION: INSTALLATION ON FIXING KIT
The brackets must always be well-aligned to each other to avoid later
problems; in case they are not, they must be properly shimmed using the
spacers to ensure the alignment. The installation of the awning can occur only
when the adapter is perfectly aligned to the wall of the vehicle.
ASSEMBLY INSTRUCTIONS
Before tightening the screws, make sure that the awning position doesn’t prevent the opening of the rear door.
ATTENTION Periodically check the brackets to make sure they are firmly attached (especially after the first kilometers) make sure the bolts are not loose and that holding brackets have not shifted.
When using the awning please follow the instructions of the product.
Read the following instructions and warnings carefully; failure to observe these installation and usage instructions as well as the laws for driving in the relevant country may cause severe harm or damage for which the manufacturer declines all responsibility. In the event of an accident involving the vehicle and/or the product, ensure that the product has not been damaged. In the event of damage, contact your local retailer before moving the vehicle. Fiamma declines every responsibility for any modification of the product that may cause damage and/ or injury to things and people. Before installation, ensure compatibility with the vehicle on which the product must be installed. Checking that the wall/roof/rear door is sufficiently solid and suitable for guaranteeing the resistance of the anchoring points is always mandatory. If not, strength and compliance with the maximum load indicated in the instructions are not guaranteed and it will be necessary to reinforce it these points.
Warranty Fiamma
In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.
Fiamma S.p.A. – Italy
Via San Rocco, 56 21010 Cardano al Campo (VA)
All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time, without notice, prices, materials,
specifications and models or to cease production of any model.
FAQ
Q: Can I install this awning kit on a different vehicle model
A: This specific kit is designed for VW T5/T6 CALIFORNIA models and may not be
compatible with other vehicles.
Q: What should I do if the brackets are not aligning properly?
A: Use spacers provided in the package to shim the brackets and ensure proper
alignment.