UMAY Fitness U20 Walking Pad User Manual

UMAY Fitness U20 Walking Pad User Manual

**Important Precaution

**

MINIMUN
USER
HEIGHT| 140 cm|
MAX
USER
WEIGHT| 265Lbs
---|---|---|---

WARNING

ORRECT LUBRICATION OF THE TREADMILL IS REALLY IMPORTANT. THISLUBRICATION MUST BE PERFORMED REGULARLY DEPENDINGONEACHPERSON, EVEN BEFORE ITS FIRST USE. YOU MUST PRESERVE THE ORIGINAL PACKAGING WITH ITS PROTECTIONS, PURCHASE RECEIPT, MANUAL, AND COMPONENTS DURING THEGUARANTEEPERIOD.

1. In order to decrease the risk of suffering severe injuries, read carefully all the important instructions and warnings regarding the use of a treadmill before using it. UMAY FITNESS doesn’t take any responsibility for personal injuries or property damages resulting from the use of this product.
2. Before starting any workout program, consult your doctor. It’s especially importantforpeople older than 35 years old, people with a health problem, and pregnant women.
3. Use the equipment as explained in the instructions manual.
4. Keep the equipment in an enclosed area, away from dust or humidity. Don’ts tore it in a garage, indoor backyard, or near the water. Humidity, dust andwatercould lead to a malfunction of the equipment, annulling its guarantee.
5. Place the unit on a flat surface. If the surface is uneven, the proper function ingcouldbe affected. Some models include levelers or leveling threads behind the legs, helping 5-The unit must be placed in a ventilated area. Don’t use it in places with sprays or oxygen dispensers. The air you breathe may be affected and cause an accident.
6. Keep children younger than 12 years old and pets away from the equipment. Keep the security distance.
7. Check in the manual the maximum weight your equipment can support. Excessive weight could lead to a malfunction in the operating system, which won’t be covered by the guarantee.
8. If your equipment is working through a power supply: make sure that the power cord and plug are in good condition. Carry out the connection only when the circuit has a ground connection, otherwise, it could cause damages to the equipment or in the property which the guarantee wont cover. Power cords must be away from hot surfaces.
9. If it is a battery-powered unit: check and make sure that they are charged enough so the display will fully function.
10. If your unit works with an electric supply: check the speed it can reach, for your security. The best is to adjust gradually the speed in order to avoid sudden changes.
11. If your unit works through an electric supply: never leave the machine unattended while it’s working.
12. Check and tighten all screws on a regular basis, because due to vibrations screws and nuts tend to loosen. Damages caused by a lack of maintenance won’t be covered by the guarantee.
13. Two people will be needed in order to take the unit from the package. Otherwise, the damages caused at this moment won’t be covered by the guarantee.
14. Don’t let any object fall into the grooves.
15. If the unit works through a power cord: unplug always the power cord cleaning it, after the workout, and before performing any maintenance duty.
16. If you start feeling pain or dizziness while training: STOP IMMEDIATELY.
17. You must preserve the original packaging with its protections, manual, and components during the guarantee period.
18. This electronic product can’t be thrown under any circumstances into municipal

rubbish bins. With the aim of preserving the environment, this product must be recycled according to the applicable law of your country. Please contact your town council to know more about this procedure.

19. Should you need technical assistance or advice with the installation of pieces, You can get in touch with us through 866-950-8629.

YOU MUST KEEP THE PURCHASE RECEIPT IN ORDER TO HAVE ACCESS TO THIS SERVICE

KEEP THIS ADVICE FOR FUTURE REFERENCES

Main Technical Features

Basic parameters:

Assembly

Plug and Play, No assemble needed

Package Including:

1. Caution
   

2. Carry out the machine from the package by two persons and place it lightly on flat floor, and put other fittings beside the machine.

3. Plug in the power and turn on the switch. Press the start key and stop key on the controller to check if the machine can work well.
   
   Workout Guidelines

Beware :
Before starting to use this or any exercise programs, consult your doctor. This is especially important for people older than 35 years old, or for people with health problems.
Program with warm-up workouts:
Warm-up: Start stretching and slightly activating the muscles between 5 and 10 minutes. The warm-up will increase your corporal temperature, your heart rate, and your blood flow, making you ready for the workouts.

• WORKOUT FOCUSED ON THE TRAINING AREA: Do some exercises during 20-30 minutes with your heart rate (don’t maintain your heart rate for more than 20 minutes during the first weeks of the exercise program). Breathe constantly and deeply during the workout (never hold your breath).
• COOL DOWN: Finish with stretching exercises during 5-10 minutes. Stretching increases the flexibility of your muscles and helps you to avoid injuries after the workouts.
  FREQUENCY OF THE WORKOUT:
  In order to be fit or improve your shape, complete three workout sessions each week, with a rest day between the workouts. After some months of regular training, you will be able of completing up to five workouts a week.

Treadmill Operation

1. A brief introduction
   This electronic watch is easy to use and has few adjustment parameters The noun convention used in the specification: Treadmill parameters: “Speed” values Motion parameters: “distance” value, “calorie” value, “time” value. Motion mode: wireless receiving control mode

This product is a wireless remote control, and the Settings are as follows:

2. tart button. Press the start button of the remote control to start the treadmill.
   LED display: Speedy range 0.3-4 MPH

3. Pause button, press the remote control pause button, treadmill pause movement, PAU appears on the screen, and pause the current movement time, distance, calories, speed, and other states, press the remote control continue button, and the movement will continue. 3: Speed +, press the remote control speed + button to increase the motionspeed. speed will go up by 0.3 mile

4. 4: Speed -, press the remote control speed – key, and decrease the moti nosed. speed will go down by 0.3 miles.

5. 5: P button, press the remote control P button, and the display window is switched by movement speed, time, distance, and calories.

6. 6: Stop the button, press the remote control stop button, and stop the movement. Please note that if the movement time exceeds 99 min 59s, the system will stop automatically.

Trouble Shooting

plug of the signal line
Replace the electronic meter
Replace the driver
****E02| ****Sensor detection error| Detect sensor route
Change motor
Change PCB
E03| Over current protection| Change PCB
E04| Sudden big current protect| Check the AC power supply voltage
Change PCB
****E05| ****Sudden low current protect| Check the AC power supply voltage
Change PCB
****E06| ****Overload error| Check running belt resistance
Change motor
Change PCB
****E08| ****PCB overheat protection| Check running belt resistance
Change PCB
| | Turn off and re-start
E09| Motor testing error| machine
---|---|---
Change motor
****E11| Motor wire not well connected| Check motor wire
Change PCB
Change motor
E12| PCB error| Change PCB
****E13| ****Computer error| Check connection wire
Change PCB
Change computer
****E14| ****Phase failure error| Re-plug the phase wire into the drive
Power off and on
Replace the motor
E16| Drive failure| Replace the motor**

The Obvious Danger List

Folding
1.2| Shearing| Inclining
Folding
1.3| Drawing-in Or Trapping| Rear roller
Drive system
1.4| Falling| Sudden starts/stops
---|---|---
Excessive speed variation
Support failure
1.5| Abrasion| Contact with moving running surface
1.6| Slippery Surface| Slipping and falling
1.7| Stored Energy| Folded treadmills falling down
Springs or elastic devices prior to assembly
2.| Electrical Hazards|
2.1| Electrocution| Contact with live components
3.| Thermal Hazards|
3.1| Burns| Contact with hot surfaces
4.| Hazards generated by neglecting ergonomic principles in design process|
4.1| Ineffective ergonomics| Size or location of support surfaces
Running surface dimensions
4.2| Human errors human behavior| Reasonably foreseeable misuse
5.| Noise Hazards|
5.1| Disturbing acoustic communication| Moving treadmill motor and belt

Maintenance

|
This product must be earthed. If the power cordis damaged, it must be replaced with a
manufacturer-recommended power cord

DO NOT TANGLE THE POWER CORD

Regular maintenance of the treadmill

• STORAGE : Keep your equipment in an enclosed place, away from dust or humidity. Don’t store it either in a garage or in an indoor backyard, or near the water. Humidity, dust, and water could damage it and affect its functioning
• ELECTRIC CABLE : Make sure that the cable and plug are in perfect condition. Electric cables must be away from hot surfaces
• SCREWS AND CONNECTING CABLES: Supervise and tighten the screws on a regular basis, because due to the vibration the screws and nuts tend to loosen.
  Lubrication : After running for a period of time, the treadmill must be configured with lubricants for lubrication.
  Schedule:
  < 3 hours/week| 2 months
  ---|---
  4 – 7 hours/week| 1 month

  8 hours/week| 15 days

“Do not lubricate more than what you need to. Remember: regular and reasonable lubrication is to improve the lifespan of your treadmill.

Whether it is necessary to lubricate, make sure the machine is switched off and unplug the electricity. Lift the running belt, and observe if there is any silicon remaining on the running board which is under the running belt. If it is dry, then you need to apply the lubricant.

a) The step to lubricate the running board is as follows: (see the above figure)
b) Stop the running belt.
c) Turn over the running belt. Insert the lubricant pot as deep as possible into the middle of the running belt. Apply the lubricant onto the inner side of the running belt. Lubricate both sides of the running belt. After the lubrication is completed, start the machine at 1km/h to let the running belt bring silicon all over the board

Align and tighten the treadmill belt

ALIGN THE BELT: Due to its use, the belt can move off-center. If the belt has moved to the left, start the treadmill and increase the speed to 3 MPH. Use the 5mm Wrench to turn the fixed left bolt clockwise or turn the fixed right bolt counterclockwise. Don’t tighten the belt too much in order to be able to walk. Repeat this procedure until the belt is properly aligned.

TIGHTEN THE BELT: (if the belt slips on the treadmill when walking). Start treadmill and increase the speed to 3 MPH. Using the 5mmwrench, turn both bolts 1/4 clockwise. If the belt is properly ight to walk, you must be able to pull upeachsideof the belt 5 or 7 cm off the platform. Be careful and maintain the belt aligned. Repeat this procedureuntil the

• TIGHTEN THE DRIVE BELT:
  If the drive belt becomes loose after using it for a period of time, you need to:
  (1) Open the motor cover.
  (2) Use the 5mm wrench to turn the adjusting bolt clockwise. Repeat this procedure until the drive belt is not slippery anymore.

• CLEANING: Don’t use abrasive products, a damp cloth is enough.

• LEVELING : If your unit is provided with leveling wheels, please adjust them in order to avoid vibrations and therefore malfunctions.

• KEEP THESE MAINTENANCE ADVISES FOR FUTURE REFERENCES

UMAY CARE

This electronic product must not be disposed of in municipal waste. To preserve the environment, this 13 product must be recycled after its useful life as required by law.

Contact UMAY 7/24 response

• 7*24 online California-based customer service team to solve after-sales problems without obstacles Return Policy: 30-Day Hassle-Free Return and Exchange
• Customer Service: California-Based Service Team Providing personalized solutions to ensure 100% customer satisfaction
• Exclusive Maintenance Service: We honor our commitment to quality and durability by offering free maintenance tools for orders within 6 months, including lubricants and remote control

Contact Number:866-950-8629
UmayCare Team E-Mail : [email protected]
Official Website : www.umayofficial.com

You must preserve the original packaging with its protections. purchase receipt, manual and components during the guarantee period.

Documents / Resources

| UMAY Fitness U20 Walking Pad [pdf] User Manual
U20 Walking Pad, U20, Walking Pad, Pad
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>