LEZYNE 74336-A1 Tubeless Pro Plugs Instruction Manual

Table of Contents

LEZYNE-74336-A1-Tubeless-Pro-Plugs-PRODUCT

Specifications

Description

The Tubeless Pro Plugs are designed to repair punctures in tubeless tires.
These plugs provide a quick and effective solution to seal punctures and prevent air leakage, allowing you to continue your ride without the need for a tire change.

Features

Step 1: Find the puncture

Step 2: Clean the inside of the tire

Using a clean cloth or paper towel, wipe the inside of the tire around the puncture area. Ensure that there is no debris or dirt that could interfere with the repair process.

Step 3: Scuff the puncture zone

To improve adhesion, use the included metal tool to scuff the puncture zone. Gently rub the tool against the puncture area to create a rough surface.

Step 4: Select the appropriate plug

Choose a plug from the pack that matches the diameter of the puncture hole. The plugs are available in different sizes to accommodate various puncture sizes.

Step 5: Apply the glue

Squeeze a small amount of glue onto the puncture area. Make sure to cover the entire hole with a thin layer of glue.

Step 6: Insert the plug

Take the selected plug and insert it into the puncture hole.
Push it in until only a small portion of the plug remains visible on the outside of the tire.

Step 7: Pull through with metal tool

Step 8: Firmly press on the backside of the plug

Press firmly on the backside of the plug to ensure that all edges are flush with the tire’s surface. This step helps to prevent any air leakage.

Step 9: Cut the excess of the plug

Using a sharp cutting tool, carefully cut the protruding part of the plug flush with the tire’s surface. This gives a clean and neat finish to the repair.

Q: Can I use these plugs on non-tubeless tires?
- A: No, these plugs are specifically designed for tubeless tires and may not work effectively on non-tubeless tires.
Q: How long does the repair last?
- A: The repair made with the Tubeless Pro Plugs is intended to be a temporary solution. It is recommended to replace the tire or seek professional assistance for a permanent fix.
Q: Can I reuse the plugs?
- A: The plugs are for one-time use only. Once inserted and cut, they cannot be reused. Make sure to have replacement plugs available for future punctures.
Q: How many plugs are included in the pack?
- A: Each pack contains one Tubeless Pro Plug, one tube of glue, and one metal tool.
Q: Can I use these plugs on large punctures?
- A: The plugs are designed for small to medium-sized punctures. For larger punctures, it is recommended to seek professional assistance or use alternative repair methods.

LEZYNE-74336-A1-Tubeless-Pro-Plugs-FIG-2

LEZYNE-74336-A1-Tubeless-Pro-Plugs-FIG-1

Find the puncture, clean the inside of the fire
Scuff the puncture zone to improve adhesion
Select the plug that matches the puncture hole diameter
Apply the glue
Insert the plug
Pull through with metal tip
Firmly press on the backside of the plug, make sure all edges are flush with the fire
Cut the tip of the plug flush to the fire

Combination plug & patch system provides a durable, lasting repair for fire punctures
Tire puncture must be completely cleaned of sealant before plug is applied
Includes two 4.5mm, two 3.5mm, two 3mm plugs, two abrasive pads, and two rubber cement tubes